O incessante aumento do volume de informações produzido por uma sociedade cada vez mais informatizada tem elevado drasticamente os requisitos quanto ao desenvolvimento de dispositivos capazes de suportar velocidades de operação cada vez mais elevadas em tamanhos cada vez mais reduzidos. No entanto, a contínua redução do tamanho desses dispositivos, celebrado através da lei de Moore, também produz um indesejável aumento na produção de calor durante a operação dos mesmos, comprometendo seu desempenho global. Uma alternativa promissora para aliviar, ou mesmo superar, estas limitações é oferecida pelos dispositivos ópticos integrados. No entanto, todo esse avanço esbarrava no fato de que as dimensões de tais dispositivos estavam restringidas fundamentalmente ao que é largamente conhecido como limite de difração (LD). Uma maneira de contornar essa limitação é obtida através da utilização de Plásmon Poláritons de Superfície, ou SPPs, que, de maneira simplificada, são ondas que se propagam ao longo da superfície de um condutor depositado sobre um dielétrico. Estas são essencialmente ondas de luz que são localizadas na superfície por causa de sua interação com os elétrons livres do condutor. Nesta interação, os elétrons livres respondem coletivamente oscilando em ressonância com a onda de luz. No presente trabalho, o fenômeno de geração de SPPs é estudado teoricamente e aplicado na modelagem de diversas estruturas de interesse científico e tecnológico, tais como acopladores direcionais e ressoadores. O objetivo principal é a obtenção de estruturas capazes de proporcionar propagação de SPPs por longas distâncias, permitindo, assim, estender ainda mais o leque de possíveis aplicações. As estruturas são investigadas prioritariamente no COMSOL Multiphysics, um aplicativo baseado em elementos finitos que permite solução vetorial de problemas eletromagnéticos. Os resultados obtidos até o momento permitem afirmar que o conceito de SPP de longa distância (long range SPP, LRSPP) podem ser aplicados com sucesso a estruturas geometricamente complexas como os ressoadores em anel e acopladores direcionais. / The continuous growth of knowledge produced by a society with increasing access to information technologies has demanded the development of communication devices capable of supporting high processing speeds at more and more reduced sizes. Nevertheless, the continuous reduction of the size of these devices, celebrated by the Moore\'s law, has also produced an undesirable increase of heat produced during the operation of the device itself, compromising its overall performance. A promising alternative to alleviate, or even overcome, these limitations has been offered by photonic integrated circuits. However, all the advance of photonic devices was restricted to what is known as diffraction limit. A fascinating way of circumventing this limit is now available to the scientific community, and consists in the generation of Surface Plasmon Polariton (SPP) waves. In a simplified manner, SPP waves are waves that propagate along a metal/dielectric interface. These waves are essentially localized at the metal/dielectric interface because of the interaction of light with free electrons of the metal. In this interaction, the free electrons respond collectively and oscillate resonantly with the incident light. In the present work, the phenomenon of SPP generation is theoretically investigated and applied to the modeling of several structures, such as directional couplers and resonators. The primary goal of this work is to design structures capable propagating SPP waves for long distances, known as long range SPP (LRSPP). The structures are investigated mostly with COMSOL Multiphysics, a finite elements based software that allows for the vectorial solution of electromagnetic problems. The results obtained so far are extremely encouraging, and prove that the LRSPP concept can be successfully applied to geometrically complex structures, such as couplers and ring resonators.

O incessante aumento do volume de informações produzido por uma sociedade cada vez mais informatizada tem elevado drasticamente os requisitos quanto ao desenvolvimento de dispositivos capazes de suportar velocidades de operação cada vez mais elevadas em tamanhos cada vez mais reduzidos. No entanto, a contínua redução do tamanho desses dispositivos, celebrado através da lei de Moore, também produz um indesejável aumento na produção de calor durante a operação dos mesmos, comprometendo seu desempenho global. Uma alternativa promissora para aliviar, ou mesmo superar, estas limitações é oferecida pelos dispositivos ópticos integrados. No entanto, todo esse avanço esbarrava no fato de que as dimensões de tais dispositivos estavam restringidas fundamentalmente ao que é largamente conhecido como limite de difração (LD). Uma maneira de contornar essa limitação é obtida através da utilização de Plásmon Poláritons de Superfície, ou SPPs, que, de maneira simplificada, são ondas que se propagam ao longo da superfície de um condutor depositado sobre um dielétrico. Estas são essencialmente ondas de luz que são localizadas na superfície por causa de sua interação com os elétrons livres do condutor. Nesta interação, os elétrons livres respondem coletivamente oscilando em ressonância com a onda de luz. No presente trabalho, o fenômeno de geração de SPPs é estudado teoricamente e aplicado na modelagem de diversas estruturas de interesse científico e tecnológico, tais como acopladores direcionais e ressoadores. O objetivo principal é a obtenção de estruturas capazes de proporcionar propagação de SPPs por longas distâncias, permitindo, assim, estender ainda mais o leque de possíveis aplicações. As estruturas são investigadas prioritariamente no COMSOL Multiphysics, um aplicativo baseado em elementos finitos que permite solução vetorial de problemas eletromagnéticos. Os resultados obtidos até o momento permitem afirmar que o conceito de SPP de longa distância (long range SPP, LRSPP) podem ser aplicados com sucesso a estruturas geometricamente complexas como os ressoadores em anel e acopladores direcionais. / The continuous growth of knowledge produced by a society with increasing access to information technologies has demanded the development of communication devices capable of supporting high processing speeds at more and more reduced sizes. Nevertheless, the continuous reduction of the size of these devices, celebrated by the Moore\'s law, has also produced an undesirable increase of heat produced during the operation of the device itself, compromising its overall performance. A promising alternative to alleviate, or even overcome, these limitations has been offered by photonic integrated circuits. However, all the advance of photonic devices was restricted to what is known as diffraction limit. A fascinating way of circumventing this limit is now available to the scientific community, and consists in the generation of Surface Plasmon Polariton (SPP) waves. In a simplified manner, SPP waves are waves that propagate along a metal/dielectric interface. These waves are essentially localized at the metal/dielectric interface because of the interaction of light with free electrons of the metal. In this interaction, the free electrons respond collectively and oscillate resonantly with the incident light. In the present work, the phenomenon of SPP generation is theoretically investigated and applied to the modeling of several structures, such as directional couplers and resonators. The primary goal of this work is to design structures capable propagating SPP waves for long distances, known as long range SPP (LRSPP). The structures are investigated mostly with COMSOL Multiphysics, a finite elements based software that allows for the vectorial solution of electromagnetic problems. The results obtained so far are extremely encouraging, and prove that the LRSPP concept can be successfully applied to geometrically complex structures, such as couplers and ring resonators.

L'intégration des nouveaux éléments basés sur la physique des plasmas dans le domaine des circuits et des systèmes micro-ondes est l'objectif de ce travail. En profitant des caractéristiques électromagnétiques des plasmas et en jouant sur leur architecture, on développe des micro-commutateurs micro-ondes et d'autres circuits radio et hyperfréquences en technologies microrubans ou en guide d'onde… La simulation de la propagation des ondes électromagnétiques dans un plasma et les études de l'interaction entre un plasma et les ondes électromagnétiques nécessite la connaissance des paramètres fondamentaux du plasma comme la permittivité. C'est pour cela qu'on étudie aussi les mesures plasmas par différents techniques comme la transmission/réflexion des ondes électromagnétiques, la perturbation des cavités résonnantes, ... Un schéma électrique équivalent modélisant un micro-commutateur hyperfréquence en plasma, est obtenu grâce aux mesures des courants de décharge électrique, à la rétro-simulation et aux techniques de modélisation numérique. Un coupleur directif hybride compact est utilisé pour les mesures plasmas en assurant la protection du matériel et de l'équipement de mesure des signaux d'un plasma. / Integration of new plasma-based elements for RF and microwave circuits and systems is the goal of this work. Taking advantage of electromagnetic characteristics of plasmas and playing on their architecture, we develop microwave micro-switches and other RF and microwave circuits by different technologies such as microstrip, waveguide circuits. The simulation of the propagation of electromagnetic waves in plasma and studying the interaction between plasma and electromagnetic waves require a pre-knowledge of its basic intrinsic parameters such as permittivity for that we also study measures and plasma different techniques like transmission/reflection of an electromagnetic waves, cavity perturbation technique... An equivalent electrical circuit modeling the plasma will be used for modeling microwave micro-switches. It is obtained by measurements of electric discharge currents, the reverse CAD simulation and numerical modeling techniques. A compact hybrid directional coupler is used to measure plasma and to protect test equipment from dangerous signals of the electrical discharge.

Dielectric High-frequency transmission lines are natural alternative to the lines made of metal in term of low loss. These lines are mainly used in microwave techniques of measuring. The main object is to describe basic parameters of metal and dielectric transmission lines and their comparison. Next point is a basic overview of the excitation the lines from metal and it's application on dielectric transmission lines. Then make the simulation of microstrip directional couplers and coupler made by dielectric waveguides. The last point of work is construction these directional couplers and measuring their most important parameters.

La technologie MID (Molded Interconnect Device), fait de leur performance électrique, la flexibilitédans les circuits RF, le potentiel de réduire le nombre de composants, les étapes du processus et laminiaturisation du produit final, a conduit à de nouvelles contraintes à la RF (Radio Frequency) et ledomaine des micro-ondes. Composants moulés sont interconnectées avec des substratsthermoplastiques et les pistes conductrices sont injectés sur la surface. L'objectif de cette thèse estd'étudier la compatibilité de MID pour les applications RF. Les avantages de la technologie MID dansle domaine RF est exploitée pour les lignes de transmission, filtres passifs, coupleurs directionnels etantennes réalisation. La caractérisation RF de différents matériaux de substrat MID et l'étude de laperformance des composants RF ci-dessus sur la base de différentes technologies de fabrication MIDsont inclus dans la thèse. Enfin, le concept d'une étude d'amélioration de la permittivité de certainsthermoplastiques sont également étudiés. / MID (Molded Interconnect Devices) technology, owing to their electrical performance,flexibility in RF circuits, its potential to reduce the number of components, process steps andminiaturization of the final product, has led to some new constraints to the RF (RadioFrequency) and microwave domain. Molded components are interconnected withthermoplastic substrates and conductive traces are injected on the surface. The objective ofthis thesis is to study the compatibility of MIDs for RF applications. The advantages of MIDtechnology in the RF domain is exploited for transmission lines, passive filters, directionalcouplers and planar and 3D antennas realization. The RF characterization of various MIDsubstrate materials and the study of the performance of the above RF components based onvarious MID fabrication technologies are included in the thesis. Finally, an permittivityimprovement study of some thermoplastics are also studied.

La technologie MID (Molded Interconnect Device), fait de leur performance électrique, la flexibilitédans les circuits RF, le potentiel de réduire le nombre de composants, les étapes du processus et laminiaturisation du produit final, a conduit à de nouvelles contraintes à la RF (Radio Frequency) et ledomaine des micro-ondes. Composants moulés sont interconnectées avec des substratsthermoplastiques et les pistes conductrices sont injectés sur la surface. L'objectif de cette thèse estd'étudier la compatibilité de MID pour les applications RF. Les avantages de la technologie MID dansle domaine RF est exploitée pour les lignes de transmission, filtres passifs, coupleurs directionnels etantennes réalisation. La caractérisation RF de différents matériaux de substrat MID et l'étude de laperformance des composants RF ci-dessus sur la base de différentes technologies de fabrication MIDsont inclus dans la thèse. Enfin, le concept d'une étude d'amélioration de la permittivité de certainsthermoplastiques sont également étudiés. / MID (Molded Interconnect Devices) technology, owing to their electrical performance,flexibility in RF circuits, its potential to reduce the number of components, process steps andminiaturization of the final product, has led to some new constraints to the RF (RadioFrequency) and microwave domain. Molded components are interconnected withthermoplastic substrates and conductive traces are injected on the surface. The objective ofthis thesis is to study the compatibility of MIDs for RF applications. The advantages of MIDtechnology in the RF domain is exploited for transmission lines, passive filters, directionalcouplers and planar and 3D antennas realization. The RF characterization of various MIDsubstrate materials and the study of the performance of the above RF components based onvarious MID fabrication technologies are included in the thesis. Finally, an permittivityimprovement study of some thermoplastics are also studied.