This thesis discusses informatik systems in companies, their technologies and new trends in hardware domain, used to simplify, speed up and streamline business processes. Consequently thesis deals with the extension of an information system in a real environment, aimed to getting more detailed data, processing and subsequent evaluation to adjustable reports.

My diploma work is focused on implementation of measuring probe to process of cutting operation by turning and description of their effective usage ways. Measuring probe are used as correction during turning process or to control measuring of turning work eventually to signal mistake in process. In practical part the laser measuring probe is used to control shaft functional dimensions. Measuring is done after tooling and it substitute exit control. Laser probe was also reviewed regarding usability for given purpose as measurement tool and in the same time were reviewed time and cost differences against alternative turning process.

The thesis is focused on the Sketchometry program and its meaningful usage. It is aimed at the program being joined within math lectures and there are two points of view - the teacher's one and the pupil's one. The thesis deals with the important aspects that influence the efficiency of the utilization of modern technologies in the schools. The results of the implemented projects in practice are contained in this work. The authentic photographs are added to make a better imagination of the workshops. The outputs from observation at the grammar school are presented by solved exercises made by the pupils in the Sketchometry program.

Master's thesis deals with principles of design of earthing of a substation 110/22 kV. Specific requirements for safety have to be fulfilled when designing power installations exceeding 1kV. The aim of this paper is to design a new earthing system for reconstructed substation 110/22kV considering valid standards. Reconstruction of a property is always more or less complicated by new orders and regulations for construction. Earthing is a part of all electric equipment, therefore it is essential for the design engineer to consider a broad spectrum of requirements, even those seemingly not related to this subject, from legislative requirements to the study of reactions of a human body to electric current. The theoretical part of this work examines different approaches to earthing system's design, and analyzes the origins and earthing standards throughout history. The correctness in consideration of effects of the environment is an often neglected factor. Defining of all types of effects of the environment is a broad field, therefore this paper only summarizes the main principles. The practical part of this paper deals with the basic design of substation's earthing system and it's verification in respect of touch voltage and step voltage according to the Czech national standard ČSN 33 3201 (Power installations exceeding 1kV a.c.) and of company's energetics' standard PNE 33 0000-1 ed.4 (Protection against electric shock in distribution network and transmission system) required by the substation's distributor. This paper later quotes and takes into consideration the requirements of other standards, more or less related to listed documents, creating an interconnected body for design and testing the earthing system.

The object of this work is to apply the measuring probe in the process of the machining and explore the use of the measuring probes. For the practical of the measurement was use measuring probes, the program supplied with the measuring probes, machining centers and the resulting data were evaluated on a PC. Finally, work is to evaluate the measurements and describe the appropriateness of the application.

This document describes the design of evaluation boards for wireless transmission of audio signal. The boards use WiSA compliant modules. It describes schematics of transmitter board, receiver board and boards of both AD and DA converter. Secondly the document describes the designed PCBs and demonstrates the results by photodocumentation. It also includes description of C library for using FLASH memory to store data and the C driver for FT800 chip and the typical application using this chip including touch

This thesis deals with the use of mobile touch technologies in German language teaching. The theoretical part of the work collects basic facts and knowledge about mobile touch devices, which are important as a didactic tool. Furthermore, the work on the theoretical level deals with information on teaching applications and teaching methods in which these touch technologies can be used. The Practical part of the work is devoted to the results of the research survey, namely the questionnaire research survey and the results from a sample lesson. The questionnaire survey revealed that mobile touch technologies are not widely distributed in schools and are not widely used during lessons. This thesis seeks to give readers a comprehensive description of the possibilities of didactic and methodical use of mobile touch devices in the teaching of German language.

This master thesis describes the design of control unit, which has the task to operate industrial facilities for disinfection of swimming pools or living rooms. The designed control unit is trying to regulate power and flow rate, which is controlled by electronic valve with a flowmetr. The whole design is aimed at minimizing operating costs (mainly consumed liquid oxygen). Interaction with the operator is ensured by the HMI display. There is also an effort to highlight the importance of HMI applications in the industry.

This master thesis deals with the use of measuring stations in an automatic machining lines. An overview of the methods of measuring engineering products in engineering practice with a focus on automation of measurement is described. The basic principles of function of these machines, their construction and materials are described. The largest part describes coordinate measuring machines, which continue to evolve and offer more and more possibilities for automatic measurement. The practical part is aimed at documenting the sample situation of measurements on this type of equipment and evaluating the possibility of its integration into the automatic machining line.

This master thesis deals with integration of measuring into process of machining. The object of this work is making summary of using measuring probes, description of the probes working principles and their division by construction and usage. The practical part of this work deals with creation of measuring cycles in softwaru Productivity+ and their implementation to machining cycles in MCV 1210. In the last part, two testing workpieces were created and the economic evaluation of introduction of the probes into machining process was performed.