The master thesis deals with the phenomena called electro-dynamic force in the electrical apparatus. Nowadays, there are high requirements for electrical devices. The devices and especially their contacts are subject to high demands on reliability, reliability and mechanical durability. The electro-dynamic forces caused by the passage of electric current mechanically deform the current path. The design of the electrical apparatus must take these forces into account. Equations for electro-dynamic forces calculation are presented. In master thesis, individual parts of the current path are derived and described. Various configurations and designs of the current path are solved. The thesis also deals with the issue of forces in electrical contacts. Individual theoretical equations are then applied to a particular disconnector QAK, made by company IVEP, a.s. Parts of the disconnector were redrawn into 3D program SolidWorks. The model was analysed in program ANSYS Maxwell. The thesis compares the achieved results of analytical equations and numerical simulations.

Elementos de materiais flexíveis são empregados em diversas aplicações na engenharia, como por exemplo, em pás de turbinas eólicas. O comportamento do escoamento é afetado pela alteração na forma da estrutura. Muitas vezes, seu movimento e deformação são induzidos pelas próprias forças fluidodinâmicas. O trabalho apresenta o estudo de escoamentos externos envolvendo a interação fluido-estrutura, com o interesse voltado ao comportamento de pás de turbinas eólicas. Simulações numéricas são realizadas com o intuito de avaliar o efeito que a deformação da estrutura, devido à resposta elástica às forças oriundas do escoamento, tem nas próprias forças fluidodinâmicas. A plataforma ANSYS Workbench é utilizada, combinando o software ANSYS CFX para a análise do fluido e o ANSYS Mechanical para a análise da estrutura. Como validação do método, o escoamento laminar sobre um cilindro apoiado elasticamente é estudado e comparado com dados da literatura. O caso escolhido para o presente trabalho é o de um escoamento turbulento sobre um elemento de pá, fixo em uma das suas extremidades e livre na outra. A geometria da pá é retangular com o perfil NACA 0012 e o modelo de turbulência utilizado é o k-ω SST. Os resultados demonstram a influência significativa que a deformação da estrutura tem nas forças fluidodinâmicas de sustentação e arrasto e concordam com a literatura existente. / Elements of flexible materials are employed in several engineering applications, for instance, in wind turbine blades. The flow behavior is affected by any change in the shape of the structure. Often, its displacement and deformation are induced by the fluid-dynamic forces themselves. This paper presents the study of an external flow using fluid-structure interaction (FSI), focused on the behavior of wind turbine blades. Numerical simulations are performed in order to evaluate the effect that the deformation of the structure, caused by the elastic response to the flow forces, has on the fluid-dynamic forces themselves. The ANSYS Workbench platform is used, combining the software ANSYS CFX for the fluid analysis and ANSYS Mechanical for the structural analysis. As a form of validation of this method, the laminar flow over an elastically mounted cylinder is studied and compared with literature data. The chosen case for this work is a turbulent flow over a 3D blade element, fixed at one end and free at the other. The blade geometry is rectangular with the NACA 0012 profile and the turbulence model used is the k-ω SST. The results demonstrate the significant influence that the deformation of the structure has on the fluid-dynamic lift and drag forces, leading to an agreement with the existing literature.

Elementos de materiais flexíveis são empregados em diversas aplicações na engenharia, como por exemplo, em pás de turbinas eólicas. O comportamento do escoamento é afetado pela alteração na forma da estrutura. Muitas vezes, seu movimento e deformação são induzidos pelas próprias forças fluidodinâmicas. O trabalho apresenta o estudo de escoamentos externos envolvendo a interação fluido-estrutura, com o interesse voltado ao comportamento de pás de turbinas eólicas. Simulações numéricas são realizadas com o intuito de avaliar o efeito que a deformação da estrutura, devido à resposta elástica às forças oriundas do escoamento, tem nas próprias forças fluidodinâmicas. A plataforma ANSYS Workbench é utilizada, combinando o software ANSYS CFX para a análise do fluido e o ANSYS Mechanical para a análise da estrutura. Como validação do método, o escoamento laminar sobre um cilindro apoiado elasticamente é estudado e comparado com dados da literatura. O caso escolhido para o presente trabalho é o de um escoamento turbulento sobre um elemento de pá, fixo em uma das suas extremidades e livre na outra. A geometria da pá é retangular com o perfil NACA 0012 e o modelo de turbulência utilizado é o k-ω SST. Os resultados demonstram a influência significativa que a deformação da estrutura tem nas forças fluidodinâmicas de sustentação e arrasto e concordam com a literatura existente. / Elements of flexible materials are employed in several engineering applications, for instance, in wind turbine blades. The flow behavior is affected by any change in the shape of the structure. Often, its displacement and deformation are induced by the fluid-dynamic forces themselves. This paper presents the study of an external flow using fluid-structure interaction (FSI), focused on the behavior of wind turbine blades. Numerical simulations are performed in order to evaluate the effect that the deformation of the structure, caused by the elastic response to the flow forces, has on the fluid-dynamic forces themselves. The ANSYS Workbench platform is used, combining the software ANSYS CFX for the fluid analysis and ANSYS Mechanical for the structural analysis. As a form of validation of this method, the laminar flow over an elastically mounted cylinder is studied and compared with literature data. The chosen case for this work is a turbulent flow over a 3D blade element, fixed at one end and free at the other. The blade geometry is rectangular with the NACA 0012 profile and the turbulence model used is the k-ω SST. The results demonstrate the significant influence that the deformation of the structure has on the fluid-dynamic lift and drag forces, leading to an agreement with the existing literature.

Elementos de materiais flexíveis são empregados em diversas aplicações na engenharia, como por exemplo, em pás de turbinas eólicas. O comportamento do escoamento é afetado pela alteração na forma da estrutura. Muitas vezes, seu movimento e deformação são induzidos pelas próprias forças fluidodinâmicas. O trabalho apresenta o estudo de escoamentos externos envolvendo a interação fluido-estrutura, com o interesse voltado ao comportamento de pás de turbinas eólicas. Simulações numéricas são realizadas com o intuito de avaliar o efeito que a deformação da estrutura, devido à resposta elástica às forças oriundas do escoamento, tem nas próprias forças fluidodinâmicas. A plataforma ANSYS Workbench é utilizada, combinando o software ANSYS CFX para a análise do fluido e o ANSYS Mechanical para a análise da estrutura. Como validação do método, o escoamento laminar sobre um cilindro apoiado elasticamente é estudado e comparado com dados da literatura. O caso escolhido para o presente trabalho é o de um escoamento turbulento sobre um elemento de pá, fixo em uma das suas extremidades e livre na outra. A geometria da pá é retangular com o perfil NACA 0012 e o modelo de turbulência utilizado é o k-ω SST. Os resultados demonstram a influência significativa que a deformação da estrutura tem nas forças fluidodinâmicas de sustentação e arrasto e concordam com a literatura existente. / Elements of flexible materials are employed in several engineering applications, for instance, in wind turbine blades. The flow behavior is affected by any change in the shape of the structure. Often, its displacement and deformation are induced by the fluid-dynamic forces themselves. This paper presents the study of an external flow using fluid-structure interaction (FSI), focused on the behavior of wind turbine blades. Numerical simulations are performed in order to evaluate the effect that the deformation of the structure, caused by the elastic response to the flow forces, has on the fluid-dynamic forces themselves. The ANSYS Workbench platform is used, combining the software ANSYS CFX for the fluid analysis and ANSYS Mechanical for the structural analysis. As a form of validation of this method, the laminar flow over an elastically mounted cylinder is studied and compared with literature data. The chosen case for this work is a turbulent flow over a 3D blade element, fixed at one end and free at the other. The blade geometry is rectangular with the NACA 0012 profile and the turbulence model used is the k-ω SST. The results demonstrate the significant influence that the deformation of the structure has on the fluid-dynamic lift and drag forces, leading to an agreement with the existing literature.

Background: Jet injectors are advantageous over needle injectors by eliminating sharps hazards. The Government Accountability Office estimates 29% preventable sharp injuries with an estimated direct cost of more than $500 million out of the CDC's reported incidence of 385,000 needle stick injuries per year among US hospital healthcare workers. Yet the forces required to set and trigger devices using spring mechanisms for medication delivery have not been explored. This laboratory experiment measured forces exerted by healthcare workers (HCWs) using a particular jet injector approved by FDA in 2011. Objectives: In order to quantify the ergonomic impact on HCWs using a needle-free injector, the first objective was to evaluate the dynamic forces required to activate the trigger injector button and the reset station for the injector, with their respective means, for each of the parameters studied. The second objective was to compare these forces to those required to use four previously analyzed retractable intramuscular syringes with needles. Finally, the third objective was to assess potential psychophysics ergonomic impact on HCWs with use of these devices to formulate future design changes and recommendations for manufacturers and HCWs, respectively. Methods: This laboratory experiment was conducted through a multi-disciplinary team approach. It included a total of 136 trials (10 validation trials, 116 experimental trials and 10 padded trials for soft tissue simulation), which were conducted using the PharmaJetTM Injector. A force gauge and a load cell were integrated into the triggering setup and reset station, correspondingly, enabling force measurements to be obtained directly from the human-machine interfaces. These force data allowed for observations of force profiles in time by the healthcare worker as researcher while preparing for and administering injections. Data collection used three software applications for force conversions and data manipulation. Data were analyzed using descriptive statistics and analytical results by using ANOVA for the trigger injector & reset station with multiple comparison tests for parametric and non-parametric distributions, respectively. Results: The descriptive results indicated an average force for triggering the injector in the 116 trials was 15.92 lbs. (70.8 N) with a range of 9.77-26.46 lbs. (43.46-117.69 N). The measured forces for the reset station ranged from 5.35-82.78 lbs. (5.35-368.22 N) with an average of 25.32 lbs. (112.62 N) (SD 12.36). Spurious findings presented with tensile forces to fill the syringes resulting in hand strain in the first metacarpal joint after repetitive pinprick motion. The analytical results showed an ANOVA for trigger injector with a parametric-normal distribution with an F (2,133) Ratio 10.0472, p- value (F) 0.0001<0.05, showing statistical significance and with a Tukey's comparison test showing a significant difference in between the means of the padded trials vs. the validation & experimental trial groups. The ANOVA for the reset station showed a Kruskal Wallis H-statistic of 0.2568, p-value (H) 0.8795>0.05 presenting NO statistical significance with a Dunn's comparison test confirming NO difference in between the medians or mean ranks of all three groups. Conclusions: Triggering the injector and resetting the station required considerable effort in comparison to activating 4 retractable intramuscular syringes with needles from our previous studies, the range of mean forces were 3.63-17 lbs (16.19-77.53 N) for those syringes with the trigger injector maximum voluntary force of 71 N being above the recommend 56.6 N.The jet injector required more force per effort than 2 (4.4x) syringes & similar to other 2 syringes (0.9x) previously tested when considering the compression forces related with the trigger injector. Additional vector forces (displacement & gripping of reset station) could increase the cumulative effort affecting different musculoskeletal components when the whole components of the procedure are taken into account. Suggestions for the manufacturer regarding design changes to facilitate HCWs' use of this device are warranted, since some of the summation forces during the 12 mini-steps could be avoided to achieve a higher efficiency. This information may be useful for health care facilities when choosing devices to protect their workers from ergonomic injuries.

This master thesis deals with an impact of particular static and dynamic forces and temperature strain on horizontal synchronous generator. In connection with this, a stress distribution in construction and an assessment of security to terminal state of flexibility and weariness is being solved together with finding the most critical places on horizontal synchronous generator.