The mechanics of paper is a difficult subject because paper is a unique material. It is very thin, flexible at bending, unstable in compression and stiff at tension. Dealing with paper we have to account for orthotropy and heterogeneities created during the manufacturing process. This thesis addresses two topics in mechanics of paper webs in printing press applications. First is the dynamic behaviour of the travelling webs. Second is so-called “fluting” after heat-set web-fed offset printing. There are a number of challenges in simulating the dynamics of the paper web. It is necessary to include the influence of the paper web transport velocity. Due to initial sag or vibrations, gyroscopic forces affect the dynamics of the webs. Furthermore, the transport velocity reduces the stress stiffening of the web. A good theoretical model should account for large displacements and should be capable of simulating wrinkles, which is essentially a post-buckling phenomenon. Finally, the paper web is surrounded with air which reduces the natural frequencies substantially by “adding" mass to the paper. A non-linear finite element formulation has been developed in this study for simulation of travelling webs. The results of the studies shows that for the tension magnitudes used in the printing industry the critical web speed lies far above those used today. Speed limitations are rather caused by ink setting and tension control problems. If the web tension profile is skew, however, edge vibrations are inevitable even at small external excitations. Fluting is a permanent wavy distortion of the paper web after heat-set web offset printing. It is often seen in high quality printing products, especially in areas covered with ink. It is generally accepted that tension and heat are required to create fluting. However, there have been certain disputes as to the mechanism of fluting formation, retention and key factors affecting this phenomenon. Most of the existing studies related to fluting are based on linear buckling theories. A finite element model, capable of simulating a post-buckling behaviour has been developed and experimentally verified. Studies show that none of the existing theories can consistently explain fluting. A new basic mechanism of fluting formation has been proposed and numerically demonstrated. Fluting was explained as a post-buckling phenomenon due to small scale moisture variations developing during through-air drying. It was concluded that air permeability variation is the key factor affecting fluting tendency. Fluting is retained due to inelastic deformations promoted by high drying temperatures. / QC 20100906

This dissertation addresses five fundamental resource allocation problems on networks, all of which have applications to support Homeland Security or industry challenges. In the first application, we model and solve the strategic problem of minimizing the expected loss inflicted by a hostile terrorist organization. An appropriate allocation of certain capability-related, intent-related, vulnerability-related, and consequence-related resources is used to reduce the probabilities of success in the respective attack-related actions, and to ameliorate losses in case of a successful attack. Given the disparate nature of prioritizing capital and material investments by federal, state, local, and private agencies to combat terrorism, our model and accompanying solution procedure represent an innovative, comprehensive, and quantitative approach to coordinate resource allocations from various agencies across the breadth of domains that deal with preventing attacks and mitigating their consequences. Adopting a nested event tree optimization framework, we present a novel formulation for the problem as a specially structured nonconvex factorable program, and develop two branch-and-bound schemes based respectively on utilizing a convex nonlinear relaxation and a linear outer-approximation, both of which are proven to converge to a global optimal solution. We also investigate a fundamental special-case variant for each of these schemes, and design an alternative direct mixed-integer programming model representation for this scenario. Several range reduction, partitioning, and branching strategies are proposed, and extensive computational results are presented to study the efficacy of different compositions of these algorithmic ingredients, including comparisons with the commercial software BARON. The developed set of algorithmic implementation strategies and enhancements are shown to outperform BARON over a set of simulated test instances, where the best proposed methodology produces an average optimality gap of 0.35% (compared to 4.29% for BARON) and reduces the required computational effort by a factor of 33. A sensitivity analysis is also conducted to explore the effect of certain key model parameters, whereupon we demonstrate that the prescribed algorithm can attain significantly tighter optimality gaps with only a near-linear corresponding increase in computational effort. In addition to enabling effective comprehensive resource allocations, this research permits coordinating agencies to conduct quantitative what-if studies on the impact of alternative resourcing priorities. The second application is motivated by the author's experience with the U.S. Army during a tour in Iraq, during which combined operations involving U.S. Army, Iraqi Army, and Iraqi Police forces sought to interdict the transport of selected materials used for the manufacture of specialized types of Improvised Explosive Devices, as well as to interdict the distribution of assembled devices to operatives in the field. In this application, we model and solve the problem of minimizing the maximum flow through a network from a given source node to a terminus node, integrating different forms of superadditive synergy with respect to the effect of resources applied to the arcs in the network. Herein, the superadditive synergy reflects the additional effectiveness of forces conducting combined operations, vis-à-vis unilateral efforts. We examine linear, concave, and general nonconcave superadditive synergistic relationships between resources, and accordingly develop and test effective solution procedures for the underlying nonlinear programs. For the linear case, we formulate an alternative model representation via Fourier-Motzkin elimination that reduces average computational effort by over 40% on a set of randomly generated test instances. This test is followed by extensive analyses of instance parameters to determine their effect on the levels of synergy attained using different specified metrics. For the case of concave synergy relationships, which yields a convex program, we design an inner-linearization procedure that attains solutions on average within 3% of optimality with a reduction in computational effort by a factor of 18 in comparison with the commercial codes SBB and BARON for small- and medium-sized problems; and outperforms these softwares on large-sized problems, where both solvers failed to attain an optimal solution (and often failed to detect a feasible solution) within 1800 CPU seconds. Examining a general nonlinear synergy relationship, we develop solution methods based on outer-linearizations, inner-linearizations, and mixed-integer approximations, and compare these against the commercial software BARON. Considering increased granularities for the outer-linearization and mixed-integer approximations, as well as different implementation variants for both these approaches, we conduct extensive computational experiments to reveal that, whereas both these techniques perform comparably with respect to BARON on small-sized problems, they significantly improve upon the performance for medium- and large-sized problems. Our superlative procedure reduces the computational effort by a factor of 461 for the subset of test problems for which the commercial global optimization software BARON could identify a feasible solution, while also achieving solutions of objective value 0.20% better than BARON. The third application is likewise motivated by the author's military experience in Iraq, both from several instances involving coalition forces attempting to interdict the transport of a kidnapping victim by a sectarian militia as well as, from the opposite perspective, instances involving coalition forces transporting detainees between interment facilities. For this application, we examine the network interdiction problem of minimizing the maximum probability of evasion by an entity traversing a network from a given source to a designated terminus, while incorporating novel forms of superadditive synergy between resources applied to arcs in the network. Our formulations examine either linear or concave (nonlinear) synergy relationships. Conformant with military strategies that frequently involve a combination of overt and covert operations to achieve an operational objective, we also propose an alternative model for sequential overt and covert deployment of subsets of interdiction resources, and conduct theoretical as well as empirical comparative analyses between models for purely overt (with or without synergy) and composite overt-covert strategies to provide insights into absolute and relative threshold criteria for recommended resource utilization. In contrast to existing static models, in a fourth application, we present a novel dynamic network interdiction model that improves realism by accounting for interactions between an interdictor deploying resources on arcs in a digraph and an evader traversing the network from a designated source to a known terminus, wherein the agents may modify strategies in selected subsequent periods according to respective decision and implementation cycles. We further enhance the realism of our model by considering a multi-component objective function, wherein the interdictor seeks to minimize the maximum value of a regret function that consists of the evader's net flow from the source to the terminus; the interdictor's procurement, deployment, and redeployment costs; and penalties incurred by the evader for misperceptions as to the interdicted state of the network. For the resulting minimax model, we use duality to develop a reformulation that facilitates a direct solution procedure using the commercial software BARON, and examine certain related stability and convergence issues. We demonstrate cases for convergence to a stable equilibrium of strategies for problem structures having a unique solution to minimize the maximum evader flow, as well as convergence to a region of bounded oscillation for structures yielding alternative interdictor strategies that minimize the maximum evader flow. We also provide insights into the computational performance of BARON for these two problem structures, yielding useful guidelines for other research involving similar non-convex optimization problems. For the fifth application, we examine the problem of apportioning railcars to car manufacturers and railroads participating in a pooling agreement for shipping automobiles, given a dynamically determined total fleet size. This study is motivated by the existence of such a consortium of automobile manufacturers and railroads, for which the collaborative fleet sizing and efforts to equitably allocate railcars amongst the participants are currently orchestrated by the \textit{TTX Company} in Chicago, Illinois. In our study, we first demonstrate potential inequities in the industry standard resulting either from failing to address disconnected transportation network components separately, or from utilizing the current manufacturer allocation technique that is based on average nodal empty transit time estimates. We next propose and illustrate four alternative schemes to apportion railcars to manufacturers, respectively based on total transit time that accounts for queuing; two marginal cost-induced methods; and a Shapley value approach. We also provide a game-theoretic insight into the existing procedure for apportioning railcars to railroads, and develop an alternative railroad allocation scheme based on capital plus operating costs. Extensive computational results are presented for the ten combinations of current and proposed allocation techniques for automobile manufacturers and railroads, using realistic instances derived from representative data of the current business environment. We conclude with recommendations for adopting an appropriate apportionment methodology for implementation by the industry. / Ph. D.