The purpose of this study is to identify and quantify factors governing extrudate swell and melt fracture. In the first part, the factors which control the extrudate swell of carbon black (N330) filled styrene-butadiene rubber (SBR) compounds at various states-of-mix were investigated. State-of-mix is quantified by effective filler volume fraction (EFVF), based on an estimate of the amount of rubber immobilised in the carbon black agglomerates. Extrudate swell was found to be dominated by recoverable strain and relaxation time, which are controlled by EFVF. In contrast, shear rate and the rubber-carbon black tridimensional transient network were not found to influence extrudate swell significantly. In the second part, melt fracture of the rubber compounds was investigated in terms of surface texture wavelength. The longer the wavelength, the greater the severity of the surface disruption. It was found that wavelength was controlled strongly by state-of mix (or by EFVF). In addition, a mechanism for melt fracture of the compounds studied has been proposed, based on average energy at the extrudate surface (t.E). Lastly, the influences of additives; paraffinic processing oil, stearic acid or a mixture of predominantly calcium fatty acid soaps on extrudate swell and melt fracture were investigated. For the rubber compounds with paraffinic processing oil or stearic acid, EFVF was found to play an important role in extrudate swell. The mixture of fatty acid soaps was shown to reduce significantly extrudate swell due to the presence of wall slip. The influence of the fatty acid soaps on extrudate swell is more noticeable for extrudates obtained from long dies, in which flow is dominated by shear. The major factors shown to exert a significant influence on melt fracture for the compounds with paraffinic processing oil or stearic acid are EFVF and green strength of the extrudate. Wall slip, promoted by a mixture of fatty acid soaps, was also found to decrease the melt fracture severity, particularly for long dies in which shear stresses are dominant.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

This study is concerned with the development of extended fluid-dynamic models for the prediction of micro-scale flows. When compared to classical fluid descriptions, such models must remain valid on scales where traditional techniques fail. Also, knowing that solution to these equations will be sought by numerical methods, the nature of the extended models must also be such that they are amenable to solution using computational techniques. Moment closures of kinetic theory offer the promise of satisfying both of these requirements. It is shown that the hyperbolic nature of moment equations imbue them with several numerical advantages including an extra order of spacial accuracy for a given reconstuction when compared to the Navier-Stokes equations and a reduced sensitivity to grid irregularities. In addition to this, the expanded set of parameters governed by the moment closures allow them to accurately model many strong non-equilibrium effects that are typical of micro-scale flows. Unfortunately, traditional moment models have suffered from various closure breakdowns, and robust models that offer a treatment for non-equilibrium viscous heat-conducting gas flows have been elusive. To address these issues, a regularized 10-moment closure is first proposed herein based on the maximum-entropy Gaussian moment closure. This mathematically well-behaved model avoids closure breakdown through a strictly hyperbolic treatment for viscous effects and an elliptic formulation that accounts for non-equilibrium thermal diffusion. Moreover, steps toward the development of fully hyperbolic moment closures for the prediction of non-equilibrium viscous gas flow are made via two novel approaches. A thorough study of each of the proposed techniques is made through numerical solution of many classical flow problems.

Consider a binary matroid M given by its matrix representation. We show that if M is a lift of a graphic or a cographic matroid, then in polynomial time we can either solve the single commodity flow problem for M or find an obstruction for which the Max-Flow Min-Cut relation does not hold. The key tool is an algorithmic version of Lehman's Theorem for the set covering polyhedron.