This master’s thesis deals with a permanent magnet synchronous machine calculation. In the first part of the thesis, the synchronous machine in general is described. Knowledge of these machines is essential for the remaining parts of the thesis. In the next part, an analytical calculation process of a given permanent magnet synchronous machine is presented. The given machine had already been manufactured before the thesis assignment. The calculation is to be adapted to the given machine. This way the parameters of the calculated machine should match the reference machine. The accuracy of the calculation can then be evaluated. Furthermore, calculations of the machine using Ansys RMxprt and Ansys Maxwell 2D are presented. The calculations are then compared with data obtained by measurements performed on the given machine. In the last part of the thesis, a modification in the analytical calculation is made to reduce the inaccuracy of the calculation. The thesis is concluded by evaluating the results.

This diploma thesis’s focuses on the mechanical design of fast solenoid throttle valve for DCC semiactive damper. Current DCC dampers work with a time response of over 10 ms, which is not suitable for fast semiactive control of vehicle chassis. The time response needs to be shortened, to improve quality of regulation. The required time response is archived by new fast electromagnetic actuator for original CES valve. The actuator has been accelerated by reducing induction of eddy currents and by reducing weight of moving parts. New valve helped to reduce the time response of damper by 28 % to 8,1 ms. The results proved, that the time response is affected more by speed of the servo effect, which is closing main orifice, than by electromagnetic actuator. There is no more potential in accelerating CES valve by actuator.

This thesis deals with measurement method pulsed quantities of electromagnetic field. This thesis was focused on methods, which make use of optic effect. Specially Faraday effect, Pockels effect and magneto-optic Kerr effect. Next it was focused on method makes use of Rogowski coil. At the end was shortly noticed about method makes use of calorimetric sensor. For experimentally realized has been chosen Faraday Magneto-optic Effect. In optic laboratory has been realized absolute methods and different methods making use of Wollaston polarizer on pneumatic optical desk. The main advantage of this method is the capability to measure the high frequency and high current signals. Next in this thesis has been written theory about Rogowski coil. This method has been experimentally realized in laboratory.

This Master Thesis deals with the side channels, AES encryption algorithm and the use of neural networks to obtain the encryption key. The first part of this work is focused on the basics of cryptography and attacks on cryptographic module. The second part is focused on electromagnetic side channel attack on PIC16F84A microcontroller with embedded AES algorithm. In this section, the Master Thesis tries to analyze electromagnetic emissions of operation S-Box in AES algorithm and try to find sensitive information to use neural network identify encryption key of the AES algorithm. In conclusion is described the software source code to determine the encryption key, summarized results and discussed ways to defend against electromagnetic side channel attack.

This theses is related to design of synchronous reluctance motors of the transverse-laminated type. The first part describes synchronous reluctance machine via space-vector theory. Furthermore this part briefly discuss the main design aspects of synchronous reluctance machines. The main part of this thesis is related to practical electromagnetic rotor design for synchronous reluctance machine by means of finite element method. On this base the rotor has been fabricated and placed inside of induction motor instead of his original rotor. On this prototype was made several measurements which were compared with results from finite element method analysis. The last part of this theses is related to short study of synchronous reluctance machine dynamical behaviour under scalar and vector control.

This paper deals with interaction of different physical phenomena in asynchronous motor. The first part of this work is devoted to computing of electrical ratios in asynchronous motor. By using the equivalent circuit in the shape of Gamma-circuit the equation for computing of currents, performances and losses of asynchronous motor are derived. The second part describes calculating of electromagnetic circuit and iron-core losses. In the next part there is the first part of associated model created which respects electric and electromagnetic ratios in the asynchronous motor. This model can be used for example to pursuance of variation of flux density caused by resizing load. In this model the unconventional way of computing the magnetizating inductance and resistance coresponding to iron-core losses is used. The next part deals with calculation of machine warming using the thermal network. In the last part there is a complete coupled model assembed which respects the interaction of electrical, electromagnetical and thermal ratios of induction machine.

This diploma thesis deals with construction and technological survey of the reinforced concrete structure. The first part of the diploma thesis deals with the properties of the reinforced concrete and with the building survey methods applied in the second part of the thesis. The second part of the diploma thesis focuses on diagnostics of existing structure. More specifically, the hardness of the concrete is tested using a Schmidt hammer and then it is further specified by testing the cores. The reinforcement in the reinforced concrete is also tested using electromagnetic indicator, ground-penetrating radar, and chopped probes. Lastly, a static assessment of the selected girder and column is conducted.

The first part of this paper presents general information about electromagnetic designing of an induction motor. Focus is on explanation of individual designing aspects and their effects on final motor parametres. Design principles for magnetic cores, slot dimensioning, stator winding and rotor squirrel cage are presented. Second chapter presents complete analytical computation of a given induction motor. Firstly several parametres need to be selected. Then sizing of stator and rotor is conducted. Secondly steady state equivalent parametres and related operating characteristics are computed. Following chapter consinsts of three final designs. In the last chapter results of mechanical analysis are presented.

The diploma thesis deals with the construction and technical survey of a reinforced concrete structure. The theoretical part describes the tested properties of concrete and the methodology of their tests used in the practical part. The practical part is devoted to the diagnosis of the existing structure, which was determined the strength of concrete using core holes, concrete adhesion by tear tests, and reinforcement of reinforced concrete elements of the structure determined by ground-penetrating radar, electromagnetic indicators and additional chopped probes.

This thesis deals with development of tool – macros which help to create coaxial cavity filters. It describes problematic design of complex structures at CST Studio Suite 2009. For this purpose macros supporting coarse and fine model to method Tuning – Space Mapping (TSM) was made. This means creating fine model at CST MWS and coarse model at CST DS.