151 |
The impact of energy efficient lighting on power networks.Mansingh, Silesh. 12 September 2014 (has links)
The power utilities in many countries have come under stress as a result of generation capacity deficits, looming fuel costs and in many developing countries the electricity demand is very quickly outstripping the available electricity supply [1]. Since 2006, Eskom has been utilizing large scale residential efficient lighting roll out programmes as a cost effective short to medium term supply security solution while the longer term capital intensive supply side, “Build Programme” was underway [2]. This mostly involved the use of non-linear compact fluorescent lamps (CFLs) to replace linear incandescent lights (ILs) with very little involvement and influence by the utility QOS (quality of supply) engineers that are responsible for ensuring supply quality on the specifically targeted Distribution networks. This dissertation highlights that while CFLs can provide the desired energy or peak power reduction required, they can also have an impact on QOS within specific sensitive networks if the appropriate CFL standards (i.e. IEC 61000-3-2) minimum requirements are not adhered for both power factor and harmonics.
These large scale CFL implementations have cost implications and hence metering and verification methods and models have been developed to simulate and quantify the returns from investing in energy efficient lighting initiatives. CFL manufacturers differ on ballast designs which have a direct impact on lamp efficacy, harmonic distortion and power factor which contribute to network quality of supply. It is for this reason that this dissertation raises an awareness of the importance of appropriate CFL standards i.t.o. the impact on quality of supply from a harmonics and power factor perspective. Due to the lack of more recent available or reliable sources of CFL test data, laboratory investigations were used to confirm the harmonics and PF characteristics of a variety of commercially available CFLs in addition to those utilised in previous large scale rollout programmes. The harmonics and power factor performance measured were compared for compliance against the international limits as prescribed in IEC 61000-3-2. Further investigations on international lighting industry standards for CFL’s has revealed gaps pertaining to harmonics and PF limits. This study is concluded by highlighting the impact of CFLs on power networks. It also provides a brief guide for utility power quality engineers by imparting an understanding of their role for the large scale efficient lighting programmes in order to pro-actively contain any possible impact on quality of supply within the regulatory limits as prescribed in the QOS standards. / M.Sc.Eng. University of KwaZulu-Natal, Durban 2013.
|
152 |
Household response to fuelwood scarcity in South-eastern Botswana : implications for energy policyKgathi, D. L. January 1992 (has links)
No description available.
|
153 |
Evaluation of alternative thermal strategies for the precast concrete system houses in Jeddah, Saudi ArabiaHashim, Nizar Hessain January 1991 (has links)
No description available.
|
154 |
Energy conservation and building design : A new approach to energy usage in Brazil, based on environmental planningPerpetuo, J. E. January 1981 (has links)
No description available.
|
155 |
Energy utilisation and combined heat & power sizing in the health serviceWilliams, Jonathan Mark January 1998 (has links)
No description available.
|
156 |
State estimation and bad data detection in electrical power systemsClewer, Bernard C. January 1986 (has links)
The thesis studies the subjects of bad data detection and state estimation in electrical power systems which are the processes whereby voltage, power flow and switch status measurements gathered continuously in real-time are used in conjunction with a model of the system to calculate the voltage levels at every node in the system. Traditionally the state estimation process requires two stages. The first stage is the pre-processing of the measurements by a bad data detector in an attempt to remove all the measurements which are grossly in error. The second is the calculation of the voltage levels by a state estimator from the remaining measurements which are likely to contain small random errors. Conventional state estimation algorithms are very sensitive to measurement errors, especially switch status errors, and unfortunately it is not possible to ensure that all the measurement errors are removed by the bad data detector. The thesis presents a new algorithm for state estimation utilising linear programming which is able to function in the presence of not only bad analogue measurements but also switch status measurement errors, thus removing the need for a bad data detector. The proposed method of state estimation is also able to include in its model of the system the individual busbars and bus-couplers within a substation. This feature enables the state estimation algorithm to process and provide additional network information thus leading to a more useful and reliable data base.
|
157 |
Retrofit of heat exchanger networks for bebottlenecking and energy savingsShokoya, Celestina Gbeminiyi January 1992 (has links)
No description available.
|
158 |
Unit commitment for thermal power systemsHamam, K. January 1975 (has links)
No description available.
|
159 |
Architectural approach to the energy performance of buildings in a hot-dry climate with special reference to EgyptHamdy, I. F. January 1986 (has links)
No description available.
|
160 |
An econometric investigation of the residential demands for electricity and gasTomlinson, M. D. January 1983 (has links)
No description available.
|
Page generated in 0.0826 seconds