Spelling suggestions: "subject:"environmental face modeling"" "subject:"environmental fase modeling""
1 |
Estimating Urban Scale Semi-volatile Organic Compound Emissions and Fate Using a Coupled Multimedia and Atmospheric Transport ModelCsiszar, Susan 28 February 2013 (has links)
Cities are sources of persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), to surrounding regions and beyond. A spatially resolved, (5×5 km2), dynamic contaminant fate model named Spatially Oriented or SO-MUM was developed by coupling the fugacity based Multimedia Urban Model (MUM) (Diamond et al., 2001; Diamond et al., 2010c) and the Boundary Layer Forecast Model and Air Pollution Prediction System (BLFMAPS) which was developed at Environment Canada (Daggupaty et al., 2006). MUM was updated to contain a revised surface film sub-model which takes into account the dynamic nature of surface films. SO-MUM was illustrated by application to the City of Toronto, Canada. Spatially resolved air emissions of Σ88PCB were estimated to be ~230 (40-480) kg y-1, 280 (50-580) g y-1 km-2, and 90 (16-190) mg y-1 capita-1 and Σ26PBDE were estimated to be 28 (6-63) kg y-1, 34 (7-77) g y-1 km-2 and 11 (2-25) mg y-1 capita-1. These emissions were back-calculated from measured air concentrations and spatial chemical mass inventories yielding emission rates per mass inventory of 0.4 (0.05-1.6) and 0.1 (0.01-0.7) g kg-1inventory y-1, for Σ88PCBs and Σ26PBDEs, respectively. Approximately 30% and 16% of PCB and PBDE emissions emanate from the city’s downtown. Air advection accounted for ~95% (PCB) and ~70% (PBDE) of total air emission losses with the remaining balance depositing to the city. The metric “Urban Travel Distance” or UTD was introduced for quantifying the extent of an urban plume resulting from spatially heterogeneous emissions. For PCBs and PBDEs the UTDs were ~25 and ~30 km. The updated surface film sub-model indicated that films “bounce” higher vapor pressure semi-volatile organic compounds (SVOCs) back into the air but they act as a transient sink from air for lower vapor pressure SVOCs, thereby facilitating transport to surface waters. Model calculations suggest that if the PCB inventory is reduced, volatilization from near-shore Lake Ontario will become a net source of PCBs to air, but that neither near-shore Lake Ontario nor soil would become a significant volatilization PBDE source to air.
|
2 |
Estimating Urban Scale Semi-volatile Organic Compound Emissions and Fate Using a Coupled Multimedia and Atmospheric Transport ModelCsiszar, Susan 28 February 2013 (has links)
Cities are sources of persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), to surrounding regions and beyond. A spatially resolved, (5×5 km2), dynamic contaminant fate model named Spatially Oriented or SO-MUM was developed by coupling the fugacity based Multimedia Urban Model (MUM) (Diamond et al., 2001; Diamond et al., 2010c) and the Boundary Layer Forecast Model and Air Pollution Prediction System (BLFMAPS) which was developed at Environment Canada (Daggupaty et al., 2006). MUM was updated to contain a revised surface film sub-model which takes into account the dynamic nature of surface films. SO-MUM was illustrated by application to the City of Toronto, Canada. Spatially resolved air emissions of Σ88PCB were estimated to be ~230 (40-480) kg y-1, 280 (50-580) g y-1 km-2, and 90 (16-190) mg y-1 capita-1 and Σ26PBDE were estimated to be 28 (6-63) kg y-1, 34 (7-77) g y-1 km-2 and 11 (2-25) mg y-1 capita-1. These emissions were back-calculated from measured air concentrations and spatial chemical mass inventories yielding emission rates per mass inventory of 0.4 (0.05-1.6) and 0.1 (0.01-0.7) g kg-1inventory y-1, for Σ88PCBs and Σ26PBDEs, respectively. Approximately 30% and 16% of PCB and PBDE emissions emanate from the city’s downtown. Air advection accounted for ~95% (PCB) and ~70% (PBDE) of total air emission losses with the remaining balance depositing to the city. The metric “Urban Travel Distance” or UTD was introduced for quantifying the extent of an urban plume resulting from spatially heterogeneous emissions. For PCBs and PBDEs the UTDs were ~25 and ~30 km. The updated surface film sub-model indicated that films “bounce” higher vapor pressure semi-volatile organic compounds (SVOCs) back into the air but they act as a transient sink from air for lower vapor pressure SVOCs, thereby facilitating transport to surface waters. Model calculations suggest that if the PCB inventory is reduced, volatilization from near-shore Lake Ontario will become a net source of PCBs to air, but that neither near-shore Lake Ontario nor soil would become a significant volatilization PBDE source to air.
|
Page generated in 0.1073 seconds