No description available.

Eruption dynamics are sensitive to ash aggregation, and ash aggregates (e.g. accretionary lapilli) are commonly found in eruptive deposits, yet few experiments have been conducted on aggregation phenomena using natural materials. Experiments were developed to produce a probabilistic relationship for the efficiency of ash aggregation with respect to particle size, collision kinetic energy and atmospheric water vapor. The laboratory experiments were carried out in an enclosed tank designed to allow for the control of atmospheric water vapor. A synthetic ash proxy, ballotini, and ash from the 2006 eruption of Tungurahua, in Ecuador, were examined for their aggregation potential. Image data was recorded with a high speed camera and post-processed to determine the number of collisions, energy of collisions and probability of aggregation. Aggregation efficiency was dominantly controlled by collision kinetic energy and little to no dependence on atmospheric water vapor was seen in the range of relative humidity conditions tested, 20 to 80%. Equations governing the relationships between aggregation efficiency and collision kinetic energy and the related particle Stokes number, respectively, were determined for implementation into large scale numerical volcanic models.

abstract: Silicic volcanoes produce many styles of activity over a range of timescales. Eruptions vary from slow effusion of viscous lava over many years to violent explosions lasting several hours. Hazards from these eruptions can be far-reaching and persistent, and are compounded by the dense populations often surrounding active volcanoes. I apply and develop satellite and ground-based remote sensing techniques to document eruptions at Merapi and Sinabung Volcanoes in Indonesia. I use numerical models of volcanic activity in combination with my observational data to describe the processes driving different eruption styles, including lava dome growth and collapse, lava flow emplacement, and transitions between effusive and explosive activity. Both effusive and explosive eruptions have occurred recently at Merapi volcano. I use satellite thermal images to identify variations during the 2006 effusive eruption and a numerical model of magma ascent to explain the mechanisms that controlled those variations. I show that a nearby tectonic earthquake may have triggered the peak phase of the eruption by increasing the overpressure and bubble content of the magma and that the frequency of pyroclastic flows is correlated with eruption rate. In 2010, Merapi erupted explosively but also shifted between rapid dome-building and explosive phases. I explain these variations by the heterogeneous addition of CO2 to the melt from bedrock under conditions favorable to transitions between effusive and explosive styles. At Sinabung, I use photogrammetry and satellite images to describe the emplacement of a viscous lava flow. I calculate the flow volume (0.1 km3) and average effusion rate (4.4 m3 s-1) and identify active regions of collapse and advance. Advance rate was controlled by the effusion rate and the flow’s yield strength. Pyroclastic flow activity was initially correlated to the decreasing flow advance rate, but was later affected by the underlying topography as the flow inflated and collapsed near the vent, leading to renewed pyroclastic flow activity. This work describes previously poorly understood mechanisms of silicic lava emplacement, including multiple causes of pyroclastic flows, and improves the understanding, monitoring capability, and hazard assessment of silicic volcanic eruptions. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2016

Η Νίσυρος είναι ένα στρωματοηφαίστειο δομημένο από Πλειοκαινικά ηφαιστειακά προϊόντα που αποτελούνται κυρίως από ανδεσίτες και βασαλτικούς ανδεσίτες πάνω στους οποίους αποτέθηκαν ασβεσταλκαλικά ηφαιστειακά προϊόντα δακιτικής – ρυοδακιτικής σύστασης με την μορφή πυροκλαστικών αποθέσεων, ροών λάβας και δόμων λάβας. Οι νησίδες του Γυαλιού, της Στρογγυλής, της Παχειάς και της Περγούσας, αποτελούνται από Πλειοκαινικούς δόμους ρυολιθικής (Γυαλί), ανδεσιτικής (Στρογγυλή) και δακιτικής σύστασης (Παχειά και Περγούσα) οι οποίοι φιλοξενούν πυροκλαστικές αποθέσεις της ανώτερης κίσσηρης του Γυαλιού (Στρογγυλή) και ενότητες του τόφφου της Κω και της Παναγιάς Κυράς (Παχειά και Περγούσα). Στην εργασία παρουσιάζουμε την ιστορία γένεσης και φωτογραφίες από τη Νίσυρο, ακολουθώντας πέντε μόνο διαδρομές. / In the present dissertation we are recording the geological monuments of Nisyros island. We present the geological history of the island, providing photos of five routes we have followed.

Soputan volcano is one of the few basaltic volcanoes among 127 active volcanoes in Indonesia. It is part of the Sempu-Soputan volcanic complex located south of Tondano Caldera, North Sulawesi and commonly produces both explosive eruptions with VEI 2-3 and effusive lava dome and flow eruptions. Over the last two decades, Soputan had thirteen eruptions, the most recent in 2016. Most eruptions started explosively, followed by dome growth and in some cases pyroclastic flows. Our study focuses on understanding the magmatic system of Soputan and what processes are responsible for its highly explosive eruptions, which are typically uncommon for a basaltic magma composition. Our study includes tephra samples predating the 1911 eruptions, lava flow samples from the 2015 eruption, and ash from a 2015 fallout deposit. Our whole rock major and trace element composition are virtually identical to lava flow and select pyroclastic deposit compositions of Kushendratno et al. (2012) for the 1911-1912 and 1991-2007 eruptions. Bulk rocks contain 49 to 51 wt.% SiO2, whereas 2015 ash samples are slightly more silicic with 53 wt.% SiO2, consistent with segregation of groundmass from phenocrysts in the eruption cloud. Mantle normalized incompatible trace elements indicate strongly depleted HFSE (High Field Strength Elements) and REE (Rare Earth Elements) signatures but with spikes at Pb and Sr and mild enrichment of Rb and Ba. In comparison of data of this study with what was reported by Kushendratno et al. (2012), Fo68-79 olivine-hosted melt inclusions range from basaltic (48-52 wt.% SiO2) to basaltic andesite (54-55 wt.%) as compared to 54 - 65 wt.% SiO2 glass in Fo68-74 olivines. The compositional range of melt inclusions is consistent with 50% fractionation of multiple minerals including observed phenocrysts of olivine, plagioclase, pyroxene and oxides. Compositional trends with an inflection point likely reflect a change in the crystallizing assemblage, where early crystallization includes clinopyroxene and plagioclase, while later crystallization is dominated by plagioclase. New volatile concentration data from melt inclusions (S max. 0.35 wt.%, Cl max. 0.17%, H2O max. 5.2 wt.% from FTIR analyses) are higher than previously reported from younger samples (S max. ~0.07 wt.%, Cl max. 0.2%, H2O max. ~1 wt.%). H2O is relatively constant (~1-4 wt.%) for individual tephra samples (data by FTIR and water by difference method). Our inclusion data suggest that more volatile-rich magmas exist at depth and this is consistent with a model whereby recharge of deep, volatile-rich magmas into a more degassed and crystal-rich magma initiates a new, highly explosive eruption.

Thesis (Ph. D.)--University of Oregon, 2003. / Typescript. Includes vita and abstract. Includes bibliographical references (leaves 190-205). Also available for download via the World Wide Web; free to University of Oregon users.

No description available.

The mechanisms and timescales associated with the triggering of caldera-forming eruptions remain ambiguous and poorly constrained. Do such eruptions start vigorously, then escalate, or can there be episodicity? Are they triggered through internal processes (e.g. recharge, buoyancy), or can external modulations play an important role? Key to answering these questions is the ability to reconstruct the state of the magma body immediately prior to eruption. My dissertation research seeks to answer these questions through detailed investigation of four voluminous caldera-forming eruptions: (1) 650 km3, 0.767 Ma Bishop Tuff, Long Valley, (2) 530 km3, 25.4 ka Oruanui eruption, Taupo, (3) 2,500 km3, 2.08 Ma Huckleberry Ridge Tuff, Yellowstone and (4) 250 km3, 26.91 Ma Cebolla Creek Tuff, Colorado. The main techniques I applied integrated glass geochemistry (major, trace and volatile), diffusion modeling, and detailed field sampling. In chapters two, three, and four these methods are applied to the initial fall deposits of three supereruptions (Bishop, Oruanui and Huckleberry Ridge) that preserve field-evidence for different opening behaviors. These behaviors range from continuous deposition of fall deposits and ignimbrite (Bishop), to repetitive start/stop behavior, with time breaks between eruptive episodes on the order of weeks to months (Oruanui, Huckleberry Ridge). To reconstruct the timescales of opening activity and relate this to conduit processes, I used two methods that exploit diffusion of volatiles through minerals and melt, providing estimates for the rate at which magmas ascended to the surface. This knowledge is then integrated with the pre-eruptive configuration of the magma body, based on melt inclusion chemistry, to interpret what triggered these systems into unrest. Finally, in chapter five I take a different approach by integrating geochemical data for melt inclusions and phenocryst minerals to test whether the mechanism of heat and volatile recharge often called upon to trigger crystal-rich dacitic magmas (the so-called monotonous intermediates), is applicable to the Cebolla Creek Tuff. This dissertation includes both previously published and unpublished co-authored material, and three online supplementary excel files.

Geoengineering has attracted large attention over recent years as to being a possible way to ameliorate some of the effects of climate change. One of the proposals, involving injecting sulphate aerosols into the stratosphere in order to cool Earth's temperature back to pre-industrial levels, has been assessed as one of the leading geoengineering proposals. Despite this, large uncertainties remain in both the physical and social sciences. Small scale trials of sulphate aerosol injection are not seen as ways to provide large amounts of useful data to inform on the climate response to stratospheric sulphate aerosol loading (whilst also facing many social and ethical barriers). Large scale trials involving injecting amounts of aerosol more comparable to what would be required to cool the Earth's temperature back to pre-industrial levels are viewed as too risky. Assessments of the climate effects of sulphate aerosol geoengineering by the scientific community therefore have largely relied on climate modelling studies. The thesis begins by reviewing sulphate aerosol geoengineering and the modelling that have been conducted to date. In light of the need to verify modelling results with observations the thesis seeks to understand the effects of nature's analogue to sulphate aerosol geoengineering: large volcanic eruptions. When a volcano erupts it can inject large amounts of SO2 gas into the stratosphere, which then undergo conversion to form sulphate aerosol, cooling the Earth in a way analogous to sulphate aerosol engineering. The ability of the climate models submitted to the Coupled Model Intercomparison Project 5 (CMIP5) database is assessed, with a particular focus on dynamical changes in the Northern Hemisphere winter period. These models fail to capture the observed NH dynamical response following eruptions, which is of concern for the accuracy of geoengineering modelling studies that assess the atmospheric response to sulphate aerosol geoengineering. Simulations of volcanic eruptions are then performed with high-top and low-top configurations of the HadGEM2-CC climate model. The high-top version of HadGEM2-CC, with enhanced vertical resolution and model height, gives a markedly improved and statistically significant post-volcanic winter dynamical simulation to its low-top counterpart. The post-winter dynamical simulation in the high-top model agrees with the observed response following volcanic eruptions. Accordingly, mechanisms involved in the dynamical changes are analysed and it is concluded that the HadGEM2-CC high-top model would give more confident simulations of sulphate aerosol geoengineering over its low-top counterpart. Given the identification of a more suitable model for geoengineering simulations following extensive investigation, the final chapter analyses simulations of the HadGEM2-CC high-top model for asymmetries between the climate response to an immediate onset of geoengineering and a rapid cessation of geoengineering - known as a 'termination' of geoengineering. The project is summarised and discussed, and future work is proposed, involving a large host of projects.

xi, 114 p. : ill. A print copy of this thesis is available through the UO Libraries. Search the library catalog for the location and call number. / Different models have been proposed for the "drumbeat" earthquakes that accompanied recent eruptive behavior at Mount St. Helens. Debate continues as to whether seismicity is related to brittle failure during the extrusion of solid dacite spines or is the result of hydrothermal fluids interacting with a crack buried in the volcanic edifice. My model predictions of steady-state conduit flow confirm the strong control that degassing exerts on eruptive behavior. I discuss the necessary role of degassing for extruded material to attain the high density (low vesicularity) of the observed spine material and discuss the implications for generating seismicity. A brittle-failure source of seismicity requires that the gouge elastic properties accommodate some strain, since the magma compressibility in the upper conduit is too low to do so on its own. I also report on a novel method for generating high-resolution digital elevation models of fault surface textures. / Committee in Charge: Dr. Alan Rempel, Chair; Dr. Katharine Cashman; Dr. David Schmidt