The three main components of wood, namely, cellulose, hemicellulose, and lignin, can be used in various areas. However, since lignin covalently crosslinks with wood polysaccharides creating networks that is an obstacle for extraction, direct extraction of different wood components in high yield is not an easy matter. One potential approach to overcome such obstacles is to treat the wood with specific enzymes that degrade the networks by specific catalysis. However, the structure of wood is so compact that the penetration of the wood fibers by large enzyme molecules is hindered. Thus, the pretreatment of wood prior to the application of enzymes is necessary, for “opening” the structure. One pretreatment method that was performed in this thesis is based on kraft pulping, which is a well-established and industrialized technique. For untreated wood, the wood fibers cannot be attacked by the enzymes. A relatively mild pretreatment was sufficient for wood polysaccharides hydrolyzed by a culture filtrate. A methanol-alkali mixture extraction was subsequently applied to the samples that were pretreated with two types of hemicellulases, Gamanase and Pulpzyme HC, respectively. The extraction yield increased after enzymatic treatment, and the polymers that were extracted from monocomponent enzyme-treated wood had a higher degree of polymerization. Experiments with in vitro prepared lignin polysaccharide networks suggested that the increased extraction was due to the enzymatic untying. However, the relatively large loss of hemicellulose, particularly including (galacto)glucomannan (GGM), represents a problem with this technique. To improve the carbohydrate yield, sodium borohydride (NaBH4), polysulfide and anthraquinone were used, which increased the yields from 76.6% to 89.6%, 81.3% and 80.0%, respectively, after extended impregnation (EI). The additives also increased the extraction yield from approximately 9 to 12% w/w wood. Gamanase treatment prior to the extraction increased the extraction yield to 14% w/w wood. Sodium dithionite (Na2S2O4) is an alternative reducing agent for the preservation of hemicelluloses because it is less expensive than metal hydrides and only contains sodium and sulfur, which will not introduce new elements to the recovery system. Moreover, Na2S2O4has the potential to be generated from black liquor. Na2S2O4 has some preservation effect on hemicelluloses, and the presence of Na2S2O4 also contributed to delignification. The extraction yield increased to approximately 15% w/w wood. Furthermore, Na2S2O4 has been applied in the kraft pulping process of spruce. The yield and viscosity increased, while the Klason lignin content and kappa number decreased, which represents a beneficial characteristic for kraft pulp. The brightness and tensile strength of the resulting sheets also improved. However, the direct addition of Na2S2O4 to white liquor led to greater reject content. This problem was solved by pre-impregnation with Na2S2O4 and/or mild steam explosion (STEX) prior to the kraft pulping process. Following Na2S2O4 pre-impregnation and mild STEX, the obtained kraft pulp had substantially better properties compared with the properties exhibited after direct addition of Na2S2O4 to the white liquor. The wood structure opening efficiency of mild STEX alone was also tested. The accessibility of the wood structure to enzymes was obtained even at very modest STEX conditions, according to a reducing sugar analysis, and was not observed in untreated wood chips, which were used as a reference. The mechanical effect of STEX appears to be of great importance at lower temperatures, and both chemical and mechanical effects occur at higher STEX temperatures. / <p>QC 20140903</p>

<p>Converting wood into paper is a complex process involving many different stages, one of which is pulping. Pulping involves liberating the wood fibres from each other, which can be done either chemically or mechanically. This thesis focuses on the most common chemical pulping method, the kraft cooking process, and especially on a recently developed improvement of the impregnation phase, which is the first part of a kraft cook.</p><p>Extended impregnation kraft cooking (EIC) technique is demonstrated to be an improvement of the kraft pulping process and provides a way to utilize softwood to a higher degree, at higher pulp yield. We demonstrate that it is possible to produce softwood (<em>Picea abies</em>) kraft pulp using a new cooking technique, resulting in a pulp that can be defibrated without inline refining at as high lignin content as 8% on wood, measured as kappa numbers above 90. Lignin is the wood constituent that holds the wood fibres together in the wood matrix. The new cooking technique uses the differences in reaction rate between the diffusion and consumption of hydroxide ions; it is used to ensure a homogenous impregnation of wood chips at lower impregnation temperatures and longer impregnation times than are generally used in the industry. The applied cooking temperatures are also substantially lower than those used in conventional kraft pulping systems, promoting uniform delignification. This results in a narrower kappa number distribution than in lab-cooked conventional kraft pulp.</p><p>High-kappa-number pulps were investigated for pulp sheet properties such as tensile strength, tensile stiffness, and compression strength. It was demonstrated that an EIC pulp of kappa number 95 has strength properties comparable to those of a conventional pulp of kappa number 82. Comparing the effects of starch multilayers on conventional and EIC pulps reveals similar effects. The use of the starch multilayer treatment increased the tensile index and decreased the tensile stiffness and short-span compression test (SCT) indices.</p><p>The EIC technique has also been used to produce a series of bleachable-grade pulps. The results indicate the possibility of increasing the lignin content of the pulp entering the oxygen delignification stage, since the reject content of gently defibered pulp is lower than 0.1% at kappa number 49.</p><p>In this thesis, we recommend that wood chips be impregnated for 2 h at 110 °C to neutralize acidic compounds in the wood and impregnate the chips with cooking chemicals, and that the ensuing cook be performed at 135–140 °C, depending on the target kappa number. We also recommend increasing the available amounts of cooking chemicals in the impregnation stage by using a higher liquor-to-wood ratio and keeping the alkali profile fairly high in the ensuing cook. This concept will reduce the amount of reject material, increase the pulping uniformity, and increase the selectivity towards lignin degradation in the kraft cook.</p> / <p>Omvandling av ved till papper är en komplicerad process som består av många olika steg där ett är massaframställningen (eng. <em>pulping</em>). Massaframställning medför att vedfibrerna frigörs från varandra på kemisk eller mekanisk väg. Denna avhandling fokuserar på den vanligaste kemiska metoden, sulfatkokning och speciellt den nyligen utvecklade förbättringen av impregnerings fasen, som är den första delen av ett sulfatkok. <em></em></p><p>Här visas att<em> Extended Impregnation kraft Cooking </em>(EIC) innebär en förbättring av sulfatkokningen och ett sätt att uppnå högre vedutnyttjande vid högre utbyte för barrved. Vi visar att det är möjligt att producera barrvedsmassa med en ny kokningsprincip som resulterar i en massa som är defibrerbar utan inline-raffinering vid så högt lignin innehåll som 8% (på ved), mätt som kappatal över 90. Lignin är den vedkomponent som håller ihop vedfibrerna i vedmatrisen. Kokningsprincipen utnyttjar skillnaderna i reaktionshastighet mellan diffusion och konsumtion av hydroxidjoner och nyttjas till att skapa en homogen impregnering av vedflisen vid lägre impregneringstemperatur och under längre tid än vad som vanligen används i industrin. De använda koktemperaturerna är också betydligt lägre än vid konventionell sulfatkokning vilket gynnar jämn delignifiering. Detta resulterar i en smalare kappatalsfördelning jämfört med laboratoriekokade konventionella massor.</p><p>Massor med höga kappatal undersöktes med avseende på egenskaper hos handark, såsom dragstyrka, dragstyvhet och kompressionsstyrka Det visades att handark från EIC massa vid kappatal 95 hade jämförbara styrkeegenskaper med konventionell massa vid kappatal 82. Vid jämförelse av effekten av stärkelse multilager på konventionella och EIC massor avslöjar liknande effekter. Användningen av stärkelsemultilager ökade dragindex och minskade dragstyvhets- och kompressions index (SCT, short-compression test).</p><p>Kokprincipen har även använts för att ta fram en serie blekbara massor. Resultaten visar på möjligheten att öka lignininnehållet i massan in till i syrgasdelignifierings-steget eftersom spetinnehållet för milt defibrerad massa var lägre än 0,1% vid kappatal 49.</p><p>I den här avhandlingen rekommenderar vi att vedflis impregneras i 2 timmar vid 110 °C för att neutralisera sura komponenter i veden och impregnera flisen med kokkemikalier, samt att utföra det efterföljande koket vid 135–140 °C beroende på önskat kappatal. Vi rekommenderar även att öka den tillgängliga mängden kokkemikalier i impregneringssteget genom att använda högre vätske-ved förhållande och att hålla alkali profilen relativt hög i det efterföljande koket. Detta koncept reducerar spetmängden, ger jämnare kokning och ökar selektiviteten för nedbrytning av lignin i sulfatkoket.</p>

Converting wood into paper is a complex process involving many different stages, one of which is pulping. Pulping involves liberating the wood fibres from each other, which can be done either chemically or mechanically. This thesis focuses on the most common chemical pulping method, the kraft cooking process, and especially on a recently developed improvement of the impregnation phase, which is the first part of a kraft cook. Extended impregnation kraft cooking (EIC) technique is demonstrated to be an improvement of the kraft pulping process and provides a way to utilize softwood to a higher degree, at higher pulp yield. We demonstrate that it is possible to produce softwood (Picea abies) kraft pulp using a new cooking technique, resulting in a pulp that can be defibrated without inline refining at as high lignin content as 8% on wood, measured as kappa numbers above 90. Lignin is the wood constituent that holds the wood fibres together in the wood matrix. The new cooking technique uses the differences in reaction rate between the diffusion and consumption of hydroxide ions; it is used to ensure a homogenous impregnation of wood chips at lower impregnation temperatures and longer impregnation times than are generally used in the industry. The applied cooking temperatures are also substantially lower than those used in conventional kraft pulping systems, promoting uniform delignification. This results in a narrower kappa number distribution than in lab-cooked conventional kraft pulp. High-kappa-number pulps were investigated for pulp sheet properties such as tensile strength, tensile stiffness, and compression strength. It was demonstrated that an EIC pulp of kappa number 95 has strength properties comparable to those of a conventional pulp of kappa number 82. Comparing the effects of starch multilayers on conventional and EIC pulps reveals similar effects. The use of the starch multilayer treatment increased the tensile index and decreased the tensile stiffness and short-span compression test (SCT) indices. The EIC technique has also been used to produce a series of bleachable-grade pulps. The results indicate the possibility of increasing the lignin content of the pulp entering the oxygen delignification stage, since the reject content of gently defibered pulp is lower than 0.1% at kappa number 49. In this thesis, we recommend that wood chips be impregnated for 2 h at 110 °C to neutralize acidic compounds in the wood and impregnate the chips with cooking chemicals, and that the ensuing cook be performed at 135–140 °C, depending on the target kappa number. We also recommend increasing the available amounts of cooking chemicals in the impregnation stage by using a higher liquor-to-wood ratio and keeping the alkali profile fairly high in the ensuing cook. This concept will reduce the amount of reject material, increase the pulping uniformity, and increase the selectivity towards lignin degradation in the kraft cook. / Omvandling av ved till papper är en komplicerad process som består av många olika steg där ett är massaframställningen (eng. pulping). Massaframställning medför att vedfibrerna frigörs från varandra på kemisk eller mekanisk väg. Denna avhandling fokuserar på den vanligaste kemiska metoden, sulfatkokning och speciellt den nyligen utvecklade förbättringen av impregnerings fasen, som är den första delen av ett sulfatkok. Här visas att Extended Impregnation kraft Cooking (EIC) innebär en förbättring av sulfatkokningen och ett sätt att uppnå högre vedutnyttjande vid högre utbyte för barrved. Vi visar att det är möjligt att producera barrvedsmassa med en ny kokningsprincip som resulterar i en massa som är defibrerbar utan inline-raffinering vid så högt lignin innehåll som 8% (på ved), mätt som kappatal över 90. Lignin är den vedkomponent som håller ihop vedfibrerna i vedmatrisen. Kokningsprincipen utnyttjar skillnaderna i reaktionshastighet mellan diffusion och konsumtion av hydroxidjoner och nyttjas till att skapa en homogen impregnering av vedflisen vid lägre impregneringstemperatur och under längre tid än vad som vanligen används i industrin. De använda koktemperaturerna är också betydligt lägre än vid konventionell sulfatkokning vilket gynnar jämn delignifiering. Detta resulterar i en smalare kappatalsfördelning jämfört med laboratoriekokade konventionella massor. Massor med höga kappatal undersöktes med avseende på egenskaper hos handark, såsom dragstyrka, dragstyvhet och kompressionsstyrka Det visades att handark från EIC massa vid kappatal 95 hade jämförbara styrkeegenskaper med konventionell massa vid kappatal 82. Vid jämförelse av effekten av stärkelse multilager på konventionella och EIC massor avslöjar liknande effekter. Användningen av stärkelsemultilager ökade dragindex och minskade dragstyvhets- och kompressions index (SCT, short-compression test). Kokprincipen har även använts för att ta fram en serie blekbara massor. Resultaten visar på möjligheten att öka lignininnehållet i massan in till i syrgasdelignifierings-steget eftersom spetinnehållet för milt defibrerad massa var lägre än 0,1% vid kappatal 49. I den här avhandlingen rekommenderar vi att vedflis impregneras i 2 timmar vid 110 °C för att neutralisera sura komponenter i veden och impregnera flisen med kokkemikalier, samt att utföra det efterföljande koket vid 135–140 °C beroende på önskat kappatal. Vi rekommenderar även att öka den tillgängliga mängden kokkemikalier i impregneringssteget genom att använda högre vätske-ved förhållande och att hålla alkali profilen relativt hög i det efterföljande koket. Detta koncept reducerar spetmängden, ger jämnare kokning och ökar selektiviteten för nedbrytning av lignin i sulfatkoket. / QC 20120216