This paper proposes a new approach to support restoration of Label Switched Paths (LSP) set up in the MPLS network. The proposed scheme tries to establish all possible bypass tunnels according to the maximum bandwidth between two LSR around the protected Label Switched Router (LSR). The proposed scheme uses the idea of the maximum bandwidth between two LSRs and establishes the bypass tunnels passing through the critical links which will affect the maximum bandwidth between two LSRs. All of LSPs affected by a LSR failure or a link failure can choice a bypass tunnel fit its QoS constraints to reroute. This paper also compares the different between the proposed bypass tunnel and link disjoint bypass tunnel. The simulation result show that the proposed approach has better packet loss in rerouting and can allow more affected LSP to reroute compare to RSVP and efficient Pre-Qualify. The proposed bypass tunnels have better performance than link disjoint bypass tunnels.

Transmission Control Protocol (TCP) designed to deliver seamless and reliable end-to-end data transfer across unreliable networks works impeccably well in wired environment. In fact, TCP carries the around 90% of Internet traffic, so performance of Internet is largely based on the performance of TCP. However, end-to-end throughput in TCP degrades notably when operated in wireless networks. In wireless networks, due to high bit error rate and changing level of congestion, retransmission timeouts for packets lost in transmission is unavoidable. TCP misinterprets these random packet losses, due to the unpredictable nature of wireless environment, and the subsequent packet reordering as congestion and invokes congestion control by triggering fast retransmission and fast recovery, leading to underutilization of the network resources and affecting TCP performance critically. This thesis reviews existing approaches, details two proposed systems for better handling in networks with random loss and delay. Evaluation of the proposed systems is conducted using OPNET simulator by comparing against standard TCP variants and with varying number of hops.

Transmission Control Protocol (TCP) designed to deliver seamless and reliable end-to-end data transfer across unreliable networks works impeccably well in wired environment. In fact, TCP carries the around 90% of Internet traffic, so performance of Internet is largely based on the performance of TCP. However, end-to-end throughput in TCP degrades notably when operated in wireless networks. In wireless networks, due to high bit error rate and changing level of congestion, retransmission timeouts for packets lost in transmission is unavoidable. TCP misinterprets these random packet losses, due to the unpredictable nature of wireless environment, and the subsequent packet reordering as congestion and invokes congestion control by triggering fast retransmission and fast recovery, leading to underutilization of the network resources and affecting TCP performance critically. This thesis reviews existing approaches, details two proposed systems for better handling in networks with random loss and delay. Evaluation of the proposed systems is conducted using OPNET simulator by comparing against standard TCP variants and with varying number of hops.

Transmission Control Protocol (TCP) designed to deliver seamless and reliable end-to-end data transfer across unreliable networks works impeccably well in wired environment. In fact, TCP carries the around 90% of Internet traffic, so performance of Internet is largely based on the performance of TCP. However, end-to-end throughput in TCP degrades notably when operated in wireless networks. In wireless networks, due to high bit error rate and changing level of congestion, retransmission timeouts for packets lost in transmission is unavoidable. TCP misinterprets these random packet losses, due to the unpredictable nature of wireless environment, and the subsequent packet reordering as congestion and invokes congestion control by triggering fast retransmission and fast recovery, leading to underutilization of the network resources and affecting TCP performance critically. This thesis reviews existing approaches, details two proposed systems for better handling in networks with random loss and delay. Evaluation of the proposed systems is conducted using OPNET simulator by comparing against standard TCP variants and with varying number of hops.

Content of master’s thesis is description field of Sliding window and it’s expansion algorithms, witch are Slow start, Congestion avoidance, Fast Retransmit and Fast Recovery algorithm. Thereinafter is described creation of model in Opnet Modeler’s simulation area. In this simulation area was analyzed reactions of average transfer speed onto variance of data size, lost ratio, latency in short and long time slot and variance of receiver’s buffer size. In last section of this document is method design witch makes it possible of transfer speed control through the use of receiver’s buffer size dynamic setting.