Structural born vibration is the most concern issue for industry. Traditionally, the accelerometer is usually used as the major monitoring device for vibration. As the mechanism getting more and more complexity, more compact, tinier and more lighting, the traditional accelerometers are suffered from the loading effect. Its accuracy of measurement is suspected and cannot match the modern measurement requirement. Hence, the studies of fiber optic vibration sensors become an urgent issue in this era. The reflection wavelength of a fiber Bragg grating¡]FBG¡^is sensitive to the variation of the strain and temperature. Our sensor configuration is made of an interferometer and fiber Bragg grating. The vibration induces a strain of the fiber Bragg grating, and it makes a phase difference between those two light beams in the interferometer. A demodulation circuit is needed to detect the phase difference caused by the vibration. In this project, the aim is focused on the vibration measurement for some complicated rotational machines or structures. A fiber optic accelerometer will be designed and studied as a vibration monitor for the other subprojects. In this the thesis, two kinds of vibration sensor head are designed and studied, the first is a bending loss sensor head and the other is an optic fiber Bragg grating sensor head. The results are narrated as follows¡G¡]1¡^ The dynamic range of the bending loss sensing head is about 50 dB.¡]2¡^The dynamic range of the optic fiber Bragg grating sensing head is 38 dB with test frequency range between 100 ~ 400 Hz, the noise level is around 1.95 ¡Ñ 10-2 rad.

No description available.