The diploma thesis is focused on the use of the waste glass with different fineness on alkali - activated composites, mainly based on slag and fly ash. The theoretical part is focused on materials that are most used for alkaline activation - slag, fly ash and their composites with waste glass. The theoretical part also deals with the alkaline activation of composites from these materials and the factors that influences the microstructure and properties of these composites. In the experimental part were prepared composites from slag and fly ash with a waste glass as substitute. These composites then have been examined on mechanical properties and microstructure, also how different fineness of glass influences these properties. Then it will be decided whether it is economically advantageous grinding waste glass to finer fractions

New emission legislation regarding air pollution control, as instructed by the Department of Environmental Affairs (DEA) to Eskom Generation Power Stations, implies a particulate emission limit of 100 mg/Nm3 for all existing power stations by 2015 and 50 mg/Nm3 for all new and existing power stations by the year 2020. Some of Eskom’s power stations which are equipped with Electrostatic Precipitators (ESP’s) were not designed for this stringent legislation. It is also experienced that ESP’s and coal quality in Eskom have deteriorated over time, resulting in the performance of the ESP’s not meeting the legislative requirements. Eskom is in the process of introducing various ESP enhancement projects to improve performance and aligning the operating philosophy to comply with the more stringent particulate emission legislation. An ESP efficiency test was conducted at Lethabo Power Station to determine the current state of the plant and performance. The results of the test were compared with the original design base specifications to determine the relevant deficiencies which contribute to high emissions and poor ESP performance. It was aimed to develop an ESP simulation model and validate the outputs with the test data. This study endeavours to demonstrate the greater impact on ESP performance when the ESP is operated outside the design specification. It is further aimed to demonstrate that a solution to the problem of high emissions is not only contributed by the variables within the ESP itself. This study is a coal to stack evaluation considering the ESP variables and the upstream conditions of the ESP that form part of the entire process. The intention of this study is to demonstrate the importance of operating an ESP at the designed parameters and highlight the significance of proper maintenance. It was learned that before any ESP enhancement technology can be implemented, the ESP and upstream conditions must be in accordance with design specifications. The implementation of an ESP enhancement technology will have no merit or justification on a unit that is being operated outside of its design specifications. The results obtained from the ESP simulation model correlated well with the ESP efficiency test data. The expectation of the model to assist operators and engineers to operate ESP’s according to the designer’s specifications was conceded. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2014

New emission legislation regarding air pollution control, as instructed by the Department of Environmental Affairs (DEA) to Eskom Generation Power Stations, implies a particulate emission limit of 100 mg/Nm3 for all existing power stations by 2015 and 50 mg/Nm3 for all new and existing power stations by the year 2020. Some of Eskom’s power stations which are equipped with Electrostatic Precipitators (ESP’s) were not designed for this stringent legislation. It is also experienced that ESP’s and coal quality in Eskom have deteriorated over time, resulting in the performance of the ESP’s not meeting the legislative requirements. Eskom is in the process of introducing various ESP enhancement projects to improve performance and aligning the operating philosophy to comply with the more stringent particulate emission legislation. An ESP efficiency test was conducted at Lethabo Power Station to determine the current state of the plant and performance. The results of the test were compared with the original design base specifications to determine the relevant deficiencies which contribute to high emissions and poor ESP performance. It was aimed to develop an ESP simulation model and validate the outputs with the test data. This study endeavours to demonstrate the greater impact on ESP performance when the ESP is operated outside the design specification. It is further aimed to demonstrate that a solution to the problem of high emissions is not only contributed by the variables within the ESP itself. This study is a coal to stack evaluation considering the ESP variables and the upstream conditions of the ESP that form part of the entire process. The intention of this study is to demonstrate the importance of operating an ESP at the designed parameters and highlight the significance of proper maintenance. It was learned that before any ESP enhancement technology can be implemented, the ESP and upstream conditions must be in accordance with design specifications. The implementation of an ESP enhancement technology will have no merit or justification on a unit that is being operated outside of its design specifications. The results obtained from the ESP simulation model correlated well with the ESP efficiency test data. The expectation of the model to assist operators and engineers to operate ESP’s according to the designer’s specifications was conceded. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2014

[Partial abstract]: This study presents the first detailed geochemical and morphological characterisation of gold grains from the southern Seward Peninsula, Alaska, a region with significant historical and on-going placer gold mining. Quantitative Au, Ag, Hg, and Cu data are presented for gold grains from eleven sites. Additionally, quantitative Te, W, As, and Sb trace element data are presented for gold grains from ten of the eleven sites. Although it is acknowledged that quantitative trace element analysis of gold grains is a relatively new endeavour, the limited trace element data obtained in this study suggest that trace element analysis could be useful for characterising gold sources on the southern Seward Peninsula. Major and minor element geochemical profiling is sufficient at differentiating between sites from regional provenance systems but insufficient at differentiating between sites within a single system. Differentiating among sites within a single system will likely require microchemical analysis of mineral inclusions and analysis of trace element signatures.

The theoretical part describes the admixtures that are used in cement replacement. Here also summarizes the findings on the influence of granulomentry, grain shape and fineness of admixtures on the density of the cement matrix. The practical part is experimentally verified the influence of fineness admixtures and grain size on the mechanical properties of concrete. Also, the rheological properties of cement are compared with admixtures depending on the type and dosage and time.