Diploma thesis solves the creating of layout study and creation of documentation for the realization new fire station. In the object is contemplated with placement of regional fire brigade unit, category JPO I and volunteer firefighter unit of city together, category JPO III/1. Fire station category will be considered as P1. The object consists of two structurally and functionally different parts. The first part is made of ceramic masonry with external thermal insulation composite system. Here are located administrative and operational premises. This section has two floors. Second part is solved as single-storey skeletal system made of reinforced concrete, roofed by prestressed concrete trusses. This part contains technical facilities and a garage. The cladding of the skeletal part of building is designed by using sandwich facade panels. Object has dissected ground plan, maximum dimensions are 54,80x22,20 m. Building has no basement and is roofed by flat roofs only. Object is located in peripheral locality of the city Jaroměř. Surrounding terrain is flat. Solved area contains a few related objects.

Processed topic of final thesis is fire station type P in Brno - Líšeň. Object is composed from three parts, main building, garage for fire vehicles and garage for other vehicles. Main entrance and exits from the garages are situated on southeast. Garages are single-storey, main building has two floors. Object has a pitched roofs with metal roofing. Foundations are from concrete and reinforced concrete. Structural system is partly masonry and partly reinforced concrete frame.

The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.

The subject of this thesis is to create a project documentation of the design of new construction of fire station in Šumperk. The fire station is designed according to ČSN 73 5710 as a C type station that will be used by professional fire brigade of Olomouc district. The object is structurally divided into two parts - a masonry building, and a reinforced concrete frame. The administrative part of the building together with the base of the fire brigade, technical room, and a fire tower are designed as a masonry building made of Ytong cellular concrete units. One of the parts is designed as a two-level object, while the technical room and the fire tower are designed as a sigle-level object. The circumferential masonry is insulated by contact thermal insulation system. The floor construction is made of Spiroll prestressed floor slabs. The roof is designed as a warm flat roof. The garage is a single-level building with built-in structure of storerooms in part of the garage. The precast reinforced concrete frame is set on foundation pads and foundation sills. The horizontal and vertical supporting structure consists of reinforced concrete parts – columns, Spiroll floor slabs, floor girders, sway frames, purlins and small purlins. The whole object is covered by a warm flat roof. The external cladding consists of PUR isolating sanwich panels.

The diploma thesis elaborates the project documentation for the construction of a new apartment of central fire station type C1 with the administrative part of the Territorial Department. The fire station is technologically linked to the second building SO.02 the technical and technological background of the fire station. The building is situated on the eastern edge of Svitavy. The building is non-cellular, it has three floors and a flat green roof. Three floors fulfilling matter with mainly administrative function is connected with two floors blocks fire station with an indoor gym. Above the floor containing garages for emergency vehicles facilities for the emergency unit are placed with a curtain that creates fading of the emergency door. The matter of the gym is optically separated from the station and highlighted with a volume narrow neck and height elevation. In the station there are training places and places for general physical preparation. The buildings are located in a sloping terrain. The ground fire station has a heliport. The establishment supporting columns of the building are for made of prefabricated calyx, and are concreted into monolithic foundation pads. Infill wall vertical bearing and non-bearing structures are designed from clay blocks type THERM. The bearing system is reinforced concrete prefabricated frame. Horizontally bearing structures are designed from prestressed hollow core slabs. The building envelope is made of a curtain wall in dark grey and red combined with a light contact thermal insulation system used on the indoor gym. The envelopes are in the administrative part and the part of the station divided by a glazed area. In the workshops and technology room the envelope is divided by lamellae. Usually there are 13 firemen during one shift, in three shifts there work 39 firemen all together. There are supposed to be 17 employees in the administrative department.