Spelling suggestions: "subject:"fluidelastic instability"" "subject:"fluiclelastic instability""
1 |
Fluid-elastic vibration of a circular cylinder in the shear flow of an air jetYang, Chao-cong 11 September 2007 (has links)
In the study, vibrations of small elastic cylinders mounted in the shear flow of an air jet are investigated experimentally. In such cases, the amplitude of the cylinder oscillation changed along with the variation of the jet velocity gradient is due to the influence of fluid elastic instability. The experiment is based on the method of the magnetic field induction to measure the motion of the small cylinder, and it involves measurements of the varying velocity in a jet through the hot- wire anemometer. We focus on the fluid-elastic instability of a circular cylinder in shear flow. The vibration behaviors of the cylinder above the critical condition are be examined with different velocity gradients, mass ratios and damping factors. The vibration amplitude of the cylinder is also larger as velocity gradient is larger. With lower mass ratios and damping factor, moreover, the orbit of cylinder is larger. When the velocity gradient is increasing, the frequency of cylinder vibration becomes higher.
|
2 |
The role of Reynolds number in the fluid-elastic instability of cylinder arraysGhasemi, Ali 05 1900 (has links)
The onset of fluid-elastic instability in cylinder arrays is usually thought to depend primarily on the mean flow velocity, the Scruton number and the natural frequency of the cylinders. Currently, there is considerable evidence from experimental measurements and computational fluid dynamic (CFD) simulations that the Reynolds number is also an important parameter. However, the available data are not sufficient to understand or quantify this effect. In this study we use a high resolution pseudo-spectral scheme to solve 2-D penalized Navier-Stokes equations in order to accurately model turbulent flow past cylinder array. To uncover the Reynolds number effect we perform simulations that vary Reynolds number independent of flow velocity at a fixed Scruton number, and then analyze the cylinder responses. The computational complexity of our algorithm is a function of Reynolds number. Therefore, we developed a high performance parallel code which allows us to simulate high Reynolds numbers at a reasonable computational cost.
The simulations reveal that increasing Reynolds number has a strong de-stabilizing effect for staggered arrays. On the other hand, for the in-line array case Reynolds number still affects the instability threshold, but the effect is not monotonic with increasing Reynolds number. In addition, our findings suggest that geometry is also an important factor since at low Reynolds numbers critical flow velocity in the staggered array is considerably higher than the in-line case. This study helps to better predict how the onset of fluid-elastic instability depends on Reynolds number and reduces uncertainties in the experimental data which usually do not consider the effect of Reynolds number. / Thesis / Master of Science (MSc)
|
3 |
Vibração em feixes tubulares. / Tube banks vibration.Arbore, Lucian 30 June 2016 (has links)
Os resultados de uma simulação numérica são apresentados para amplitudes de vibração induzidas por um escoamento transversal num feixe tubular no regime de instabilidade fluidelástica.O feixe tubular considerado tem geometria e características iguais às de uma instalação equivalente descrita na literatura, para a qual estão disponíveis as medições experimentais das amplitudes de vibração no regime de instabilidade elástica.O arranjo tipo triângulo rodado tem uma relação passo/diâmetro de 1,375 e consiste de um tubo móvel cercado por 134 tubos rígidos.A simulação numérica foi efetuada através de um software comercial de CFD (Computational Fluid dynamics).Para a região em torno de cada tubo foi considerada uma malha com dimensões do elemento crescendo geometricamente na direção normal ao tubo com fator de crescimento 1,13 , sendo a dimensão do elemento adjacente ao tubo igual a 0,1% do diâmetro externo do tubo.Na simulação numérica o escoamento foi considerado incompressível, monofásico, turbulento e bidimensional. Os dados do escoamento foram considerados idênticos aos das experiências da instalação descrita na literatura.Os resultados obtidos para as amplitudes pela simulação numérica são comparados com os resultados obtidos experimentalmente na instalação acima citada.Os desvios da maioria dos valores calculados em relação aos valores experimentais estão numa faixa aceitável. Isto mostra que existe a possibilidade de utilização, num futuro próximo, de CFD para análise deste tipo de problemas. / Results from a numerical simulation are reported for amplitudes of cross-flow induced vibrations at the fluid elastic instability regime in a tube bank. The tube bank has identical geometry and characteristics as for an experimental facility described in the literature, for which there are experimental measurements of the amplitudes of vibrations at the fluid elastic instability regime.The rotated triangular array has a pitch ratio of 1.375 and consists of 1 movable tube surrounded by 134 rigid tubes. The numerical simulations were accomplished with a commercial CFD (Computational Fluid Dynamics) software. For the region around each tube, a mesh with elements dimensions growing geometrically normal to the tube was considered, with growing factor 1.13, and the dimension for the element adjacent to the tube wall was set to 0.1% of the tube external diameter. The flow was considered incompressible, monophasic, turbulent and two-dimensional for the numerical simulation. The flow data considered were the same as for the experiments at the facility. The results presented in this paper for the amplitudes obtained by numerical simulation are compared with the experimental results obtained in the above mentioned experimental facility.The differences between the calculated values and the experimental values are acceptable. This show that in the near future there is the possibility to use CFD for these kind of problems.
|
4 |
Vibração em feixes tubulares. / Tube banks vibration.Lucian Arbore 30 June 2016 (has links)
Os resultados de uma simulação numérica são apresentados para amplitudes de vibração induzidas por um escoamento transversal num feixe tubular no regime de instabilidade fluidelástica.O feixe tubular considerado tem geometria e características iguais às de uma instalação equivalente descrita na literatura, para a qual estão disponíveis as medições experimentais das amplitudes de vibração no regime de instabilidade elástica.O arranjo tipo triângulo rodado tem uma relação passo/diâmetro de 1,375 e consiste de um tubo móvel cercado por 134 tubos rígidos.A simulação numérica foi efetuada através de um software comercial de CFD (Computational Fluid dynamics).Para a região em torno de cada tubo foi considerada uma malha com dimensões do elemento crescendo geometricamente na direção normal ao tubo com fator de crescimento 1,13 , sendo a dimensão do elemento adjacente ao tubo igual a 0,1% do diâmetro externo do tubo.Na simulação numérica o escoamento foi considerado incompressível, monofásico, turbulento e bidimensional. Os dados do escoamento foram considerados idênticos aos das experiências da instalação descrita na literatura.Os resultados obtidos para as amplitudes pela simulação numérica são comparados com os resultados obtidos experimentalmente na instalação acima citada.Os desvios da maioria dos valores calculados em relação aos valores experimentais estão numa faixa aceitável. Isto mostra que existe a possibilidade de utilização, num futuro próximo, de CFD para análise deste tipo de problemas. / Results from a numerical simulation are reported for amplitudes of cross-flow induced vibrations at the fluid elastic instability regime in a tube bank. The tube bank has identical geometry and characteristics as for an experimental facility described in the literature, for which there are experimental measurements of the amplitudes of vibrations at the fluid elastic instability regime.The rotated triangular array has a pitch ratio of 1.375 and consists of 1 movable tube surrounded by 134 rigid tubes. The numerical simulations were accomplished with a commercial CFD (Computational Fluid Dynamics) software. For the region around each tube, a mesh with elements dimensions growing geometrically normal to the tube was considered, with growing factor 1.13, and the dimension for the element adjacent to the tube wall was set to 0.1% of the tube external diameter. The flow was considered incompressible, monophasic, turbulent and two-dimensional for the numerical simulation. The flow data considered were the same as for the experiments at the facility. The results presented in this paper for the amplitudes obtained by numerical simulation are compared with the experimental results obtained in the above mentioned experimental facility.The differences between the calculated values and the experimental values are acceptable. This show that in the near future there is the possibility to use CFD for these kind of problems.
|
5 |
CFD simulace vibrací vyvolaných prouděním / CFD simulation of fluid-induced vibrationKubíček, Radek January 2019 (has links)
The presented diploma thesis focuses on flow-induced vibrations of a tube. The main aim and benefit is the analysis of tube stiffness in contact with the other one and the following use of obtained values and characteristics in CFD simulations. The work can be divided into three parts. The first part is about the current state of knowledge of flow-induced vibrations. It introduces the basic mechanisms of vibration and methods for their suppression. The second part deals with the determination of stiffness of defined geometry tube including the collision with the other tube. The final part demonstrates and evaluates the application of obtained characteristics in CFD simulations.
|
6 |
Analýza cyklické únavy trubkového svazku vlivem proudění pracovního média / Flow Induced Vibration Fatigue Analysis of Tube BundleBuzík, Jiří January 2018 (has links)
The aim of the dissertation thesis is the control of the tube bundle on the cyclic fatigue caused by the flow past tube bundle. Fatigue due to flow is caused by flow-induced vibrations. Examined vibrations are caused by the mutual interaction of two phases (solid and liquid). The present work is focused mainly on the interaction of tube bundles with fluid. The current level of knowledge in this field allows to predict mainly static respectively quazi-static loading. These predictions are based on methods of comparing key vibration variables such as frequencies, amplitudes or speeds (see TEMA [1]). In this way, it is possible to determine quickly and relatively precisely the occurrence of a vibrational phenomenon, but it is not possible to quantitatively assess the effect of these vibrations on the damage of to the tube beam and to predict its lifespan, which would require the determination of the temperature field and the distribution of forces from the fluid on the beam. The aim of the work is to evaluate the-state-of-the-art, to perform a numerical simulation of the flow of fluids in the area of shell side under the inlet nozzle. Current methods of numerical analyses very well solve this problem, but at the expense of computing time, devices and expensive licences. The benefit of this work is the use of user-defined function (UDF) as a method for simulating interaction with fluid and structure in ANSYS Fluent software. This work places great emphasis on using the current state of knowledge for verifying and validation. Verifying and validation of results include, for example, experimentally measured Reynolds and Strouhal numbers, the drag coefficients and for example magnitude of pressure coefficient around the tube. At the same time, it uses the finite element method as a tool for the stress-strain calculation of a key part on tube such as a pipe-tube joint. Another benefit of this work is the extension of the graphical design of heat exchanger according to Poddar and Polley by vibration damages control according to the method described in TEMA [1]. In this section, the author points out the enormous influence of flow velocity on both the tube side and the shell side for design of the heat exchanger to ensure faultless operation. As an etalon of damage, the author chose a heat exchanger designated 104 from the Heat Exchanger Tube Vibration Data Bank [3]. With this heat exchanger, vibrational damage has been proven to be due to cutting of the tubes over the baffles. The last part outlines the possibilities and limits of further work.
|
Page generated in 0.1045 seconds