Spelling suggestions: "subject:"fluidinclusion"" "subject:"fluidsincluding""
1 |
Fluid inclusion studies of microfractures in Eriboll Formation, NW Scotland : insights into timing of fracture openingXu, Guangjian 09 November 2012 (has links)
The Cambrian Eriboll Formation exposed in the footwall of the Moine Thrust, NW Scotland, provides a suitable outcrop analog for naturally fractured tight-gas sandstone reservoirs. Previous studies distinguished five regional sets of quartz-lined or quartz-filled macrofractures (>10 m in opening displacement) that have the following strikes, from oldest to youngest, N, NW to WNE, NE, EW, and NNE (set A through set E), respectively (Laubach and Diaz-Tushman, 2009). Crosscutting relations among microfractures imaged by scanning electron microscope cathodoluminescence (SEM-CL) indicate that microfracture sets follow the same age sequence as macrofractures. Macrofractures >100 m wide are characterized by crack-seal textures interpreted to reflect multiple generations of fracture opening and cemention. In contrast, multiple stages of fracture opening and sealing are not observed in thinner microfractures.
Microfractures in the Eriboll Formation are completely to partially filled with quartz cement. Microfractures contain trails of fluid inclusions trapped during fracture cement precipitation. Using microthermometry, I determined that set A microfractures have the highest range in trapping temperature of all sets, ranging from 175°C to 222°C. Fluid inclusion trapping temperatures in set B range between 181°C and 183°C, in set C between 132°C and 143°C, and in set D between 128°C to 188°C. Fluid inclusion assemblages (FIAs) of set E fluid inclusions recorded the lowest temperatures between 79°C and 91°C.
Fluid inclusion microthermometric data shows a wide range of up to 46°C in homogenization temperatures for all fluid inclusion assemblages. I attribute this wide range to a combination of (1) partial re-equilibration of inclusions by later thermal events, (2) protracted sealing of microfractures under changing burial temperature conditions, and (3) repeated opening and sealing of microfractures without a recognizable textural record of crack-seal. I interpret the lowest temperature, after pressure correction in each FIA, to record the temperature of initial fracture opening and refer to this as the initial trapping temperature Ti. Initial trapping temperatures (Ti) of 22 fluid inclusion assemblages (FIAs) in different microfracture sets record an overall decrease in temperatures from set A to set E.
Based on the fluid inclusion trapping temperatures, I determined the duration of microfracture opening and sealing in comparison with the reconstructed thermal history of the Eriboll Formation. This comparison suggests that microfracture sets A through set E formed between 445 Ma to 205 Ma. Set A formed before the emplacement of the Moine Thrust. Set B and set C formed shortly after the emplacement of the Moine Thrust during Early Silurian times, and set D and set E formed during the subsequent uplift and cooling.
The wide range in initial trapping temperature Ti for sets A and D suggests that these fracture sets formed over periods spanning 25 Ma and 30 Ma, respectively. Shorter times are indicated for sets B, C, and E. Long periods of fracture formation are also consistent with a 4°C range in fluid inclusion ice melting temperatures, suggesting fluid inclusion trapping and thus repeated opening and sealing of microfractures as pore fluid composition changed over time. These findings indicate that microfractures could remain open in deep basin settings for geologically long periods of time providing potential pathways for fluids in otherwise poorly conductive sedimentary sequences. / text
|
2 |
The Jianfengling granite complex and the associated polymetallic mineralisation, Hunan Province, P.R. ChinaWang, Can Sheng January 1993 (has links)
No description available.
|
3 |
The nature and origin of Western Australian tourmaline nodules ; a petrologic, geochemical and isotopic studyShewfelt, Debbie Amy 23 January 2006
The origin of tourmaline nodules, bizarre spherical to irregular textures documented worldwide, remains a geologic mystery. Although previously described by numerous researchers, the physical and chemical parameters that govern their formation have yet to be resolved. Commonly containing tourmaline, quartz, and occasionally feldspar, nodules are surrounded by a halo of leucocratic host rock, and are typically eight to ten centimeters in diameter. Tourmaline nodules of the present study are contained within the Paleoproterozoic Scrubber Granite of the southern Gascoyne Complex in Western Australia. </p> <p>This study integrated field observations, nodule petrography, tourmaline crystal chemistry, tourmaline fluid inclusion analyses, whole rock chemistry of nodule cores, leucocratic halo zones and host granite zones, stable and radiogenic isotope signatures of tourmaline separates as well as comparisons with other tourmaline nodule studies to propose the most scientifically sound theory for the formation of tourmaline nodules in the Scrubber Granite. </p> Numerous nodule morphologies, including spherical and C-shaped nodules, along with other features such as tube-like nodules and tourmaline veins occur in massive, porphyritic, foliated and sheared phases of the Scrubber Granite. Microscopically, tourmaline displays prismatic, sub-rounded and massive textures. Microthermometric studies completed on tourmaline fluid inclusions revealed that the nodule-forming fluid contained 14 to 15 weight percent NaCl + CaCl2. Based on stable isotope studies and homogenization temperatures, fluid temperatures were constrained between 450 and 700¢ªC. The ¥ä18O and ¥äD concentrations of the nodule-forming fluid at this temperature range plot above the typical magmatic water field. Epsilon Nd values indicate that the tourmaline nodules of the Scrubber Granite may have been disturbed by a later metamorphic event.</p>Tourmaline nodules of the Scrubber Granite are herein proposed to have formed from the exsolution and rise of buoyant pockets or bubbles of volatile fluid derived from the crystallizing Scrubber Granite magma.
|
4 |
The nature and origin of Western Australian tourmaline nodules ; a petrologic, geochemical and isotopic studyShewfelt, Debbie Amy 23 January 2006 (has links)
The origin of tourmaline nodules, bizarre spherical to irregular textures documented worldwide, remains a geologic mystery. Although previously described by numerous researchers, the physical and chemical parameters that govern their formation have yet to be resolved. Commonly containing tourmaline, quartz, and occasionally feldspar, nodules are surrounded by a halo of leucocratic host rock, and are typically eight to ten centimeters in diameter. Tourmaline nodules of the present study are contained within the Paleoproterozoic Scrubber Granite of the southern Gascoyne Complex in Western Australia. </p> <p>This study integrated field observations, nodule petrography, tourmaline crystal chemistry, tourmaline fluid inclusion analyses, whole rock chemistry of nodule cores, leucocratic halo zones and host granite zones, stable and radiogenic isotope signatures of tourmaline separates as well as comparisons with other tourmaline nodule studies to propose the most scientifically sound theory for the formation of tourmaline nodules in the Scrubber Granite. </p> Numerous nodule morphologies, including spherical and C-shaped nodules, along with other features such as tube-like nodules and tourmaline veins occur in massive, porphyritic, foliated and sheared phases of the Scrubber Granite. Microscopically, tourmaline displays prismatic, sub-rounded and massive textures. Microthermometric studies completed on tourmaline fluid inclusions revealed that the nodule-forming fluid contained 14 to 15 weight percent NaCl + CaCl2. Based on stable isotope studies and homogenization temperatures, fluid temperatures were constrained between 450 and 700¢ªC. The ¥ä18O and ¥äD concentrations of the nodule-forming fluid at this temperature range plot above the typical magmatic water field. Epsilon Nd values indicate that the tourmaline nodules of the Scrubber Granite may have been disturbed by a later metamorphic event.</p>Tourmaline nodules of the Scrubber Granite are herein proposed to have formed from the exsolution and rise of buoyant pockets or bubbles of volatile fluid derived from the crystallizing Scrubber Granite magma.
|
5 |
Fluid and metal sourcing for the native silver deposits in the Batopilas Mining District, Chihuahua, MexicoKallstrom, Michael Joseph, M.S. in Geological Sciences 09 November 2012 (has links)
The Batopilas Mining District was a major silver producer, with estimated historic production of more than 300 million ounces. Orebodies consist of high-grade silver in the forms of native silver, acanthite and proustite hosted dominantly in calcite veins. Recent exploration has facilitated the reexamination of the geologic features and origin of the enigmatic native silver district. Sulfur, lead, and strontium isotopic studies have been conducted to constrain the fluid and metal sourcing. [delta]³⁴SvCDT isotope signatures for galena, sphalerite and pyrite range from -8 to -2, -6 to 0, and -5 to 3°/₀₀, respectively. A fractionation temperature of 227±25 °C can be obtained using average sulfur isotope values for galena and sphalerite. Galena lead isotopic values show two distinct signatures. Samples of massive-replacement style mineralization have ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of 18.742 and 18.747, 15.611 and 15.618, and 38.512 and 38.535, respectively. For vein samples, the corresponding values range from 18.799 to 18.817, 15.623 to 15.639, and 38.603 to 38.655. The lead isotopic signatures for vein galena have lower thorogenic lead content than other ore deposits in the Sierra Madre Occidental, suggesting a different source of metals. Vein calcite samples have ⁸⁷Sr/⁸⁶Sr isotopic compositions ranging from 0.707551 to 0.70590 (±0.000009) and Sr concentrations ranging from 51 to 246 ppm. These vein components may reflect mixed deep-marine sedimentary and Precambrian basement sources. A reconnaissance fluid inclusion study was conducted to better constrain fluid temperature and composition. The minerals studied included quartz, fluorite, and two types of sphalerite. The average eutectic temperatures obtained are -38°C, -31°C, and -43°C, respectively, indicating a complex mineralizing brine. Homogenization temperatures averaged 143°C, 165°C, and 174°C, and the NaCl equivalent weight percents averaged 4, 7, and 17, respectively. Fluids involved in vein mineralization are different from those typical of epithermal vein Ag-Au deposits, and may represent sedimentary brines that have circulated through the underlying basement. / text
|
6 |
CHARACTERISTICS OF DIAGENETIC FLUIDS AFFECTING TWO MAJOR CAR-BONATE UNITS ON VICTORIA ISLAND, NORTHWEST TERRITORIESMathieu, Jordan-Paul 17 March 2014 (has links)
Diagenetic histories of Proterozoic and Paleozoic carbonate strata on Victoria Island, in the Canadian arctic, are poorly understood, and their potential to be associated with base metals or petroleum is unknown. Using fluid inclusion and geochemical techniques, it was determined that the diagenetic fluid compositions of two major carbonate units, the Wynniatt Formation and the “Victoria Island formation”, were largely controlled by fluid-rock reactions in reservoirs and by mixing of multiple fluids. Diagenesis of the Wynniatt Formation resulted from the progression from a shale-dominant fluid mixture to a meteoric-dominant mixture. Fluid composition of “Victoria Island formation” was a shale-dominant mixture. A change in fluid:rock from low to high was recorded during diagenesis of both units. Metals and hydrocarbons transported to the study sites were ac-quired by the fluids during interaction with the respective source reservoirs. Mixing of diagenetic fluids follows the established ‘mixing model’ used to explain many other min-eralised locations. The diagenetic fluids that affected the strata in this study were compa-rable to those that produced the Polaris Zn-Pb deposit. This similarity suggests that there is potential for mineralisation on Victoria Island.
|
7 |
Geochemical Characterization and Fluid History of the Tiger Zone; a Tertiary Distal Carbonate-Replacement Intrusion-Related Gold Deposit, Central YukonThiessen, Eric J Unknown Date
No description available.
|
8 |
Fluid inclusions and geochemistry of the Peña del Seo W-deposit, northwest Spain : Controlling mechanisms for tungsten depositionBergström, Sara January 2020 (has links)
The Peña del Seo tungsten deposit in northwestern Spain is situated in the tin (Sn)-tungsten (W) metallogenic province of Europe − one of the richest tin-tungsten (tantalum-lithium) mineral provinces in the world. The European Union’s current goal is to become self-sufficient of these commodities in the near future and the iTARG3T project was launched in order to improve the understanding and provide innovative exploration methods of these types of deposits. This master thesis will contribute to the iTARG3T project. The aim was to determine which physico-chemical conditions (temperature, pressure, salinity) that prevailed during the emplacement of the Peña del Seo deposit. A geochemical study was done consisting of a fluid inclusion study on the quartz veins from the deposit, and a whole-rock geochemistry analyse of the granitic rock. Homogenisation temperatures ranged between 97,6° C to 325,6° C and salinities (NaCl % equiv.) between 0,2% to 21,3%. The fluid was determined to consist of a two-component system of H2O and NaCl based on eutectic temperature. Based on its geochemical classification the granitic rock was considered to be an alkali granite, strongly peraluminous with S-type characteristics. At least two different types of fluids were present during the emplacement of the Peña del Seo deposit, one that was hot and with a moderate salinity, and one that had a lower temperature than the other fluid and a lower salinity, possibly meteoric water. The depositional mechanism of tungsten is thought to be caused by a combination between mixing between two fluids and cooling of the fluids, with the main depositional mechanism being cooling since the change in salinity was not of such magnitude that it would change the fluid chemical composition, while the decrease in temperature was. It is uncertain whether the granitic rock found at Peña del Seo is part of the granitic cupola of the greisen system. The granitic rock has similar characteristics as the leucogranites of the West Asturian-Leonese Zone and based on quartz vein morphology, which cut the D2 foliation, time of emplacement of the deposit could be linked to the syntectonic event at 320-310 Ma. If the relation between the granitic rock and the greisen system can be determined the time of emplacement would be possible.
|
9 |
A Mineralogical and Fluid Inclusion Study of Massive Sulphide Samples from the Juan De Fuca Ridge, Northeast Pacific OceanMeecham, Randy John 26 April 1990 (has links)
<p> In the past decade, sites of hydrothermal activity along the Juan de Fuca Ridge have gained a growing amount of attention. Increased sampling has provided the materials for more detailed studies, including those collected from Axial Seamount, a large shield volcano on the central portion of the ridge. Axial Seamount is host to at least three active vent sites, one of which, along the northwest caldera wall, consists of recently active eruptive-fissures and nearby chimney-like spires. A sampled spire from this location and samples from other vent areas are described using reflected and transmitted light techniques. They have been
found to consist of the sulphide phases sphalerite, wurtzite, pyrite, marcasite, chalcopyrite, isocubanite, and galena. Jordanite and tetrahedrite-tennanite are also known to
precipitate at these vent sites, but were not observed here. The most dominant non-sulphide minerals are amorphous silica and barite. Native sulfur, Fe and Mn oxides and a variety of
sulfosalts may also be present. The complex textures in these samples reflect precipitation and growth from higher temperature fluids that are mixing with local ambient seawater. Fluid inclusions in sphalerite have revealed salinities in the 5.6 to 7.0 weight % NaCl range, with
homogenization temperatures ranging from 214.8°C to 269.4°C. Temperatures of homogenization require pressure-corrections between approximately 9.0°C and 13.0°C, to set-up a range of trapping temperatures that lie between 211.8°C and 279.4°C. Fluid inclusions are also found in wurtzite, barite, and amorphous silica however, these would yield no data. Middle Valley is a sedimented rift valley that lies at the extreme north end of the Juan de Fuca Ridge. A number of hydrothermal sulphide mounds that lie atop the sediment pile have been sampled. The mineralogy is similar to that at Axial Seamount; however, the dominant sulphide phase at Middle Valley is pyrrhotite. Textural differences between the two
sites are significant, a result of the traversing of hydrothermal fluids through a thick package of hemepelagic sediment at Middle Valley. Samples from Middle Valley are found to contain no measurable fluid inclusions in the sections available for study. Mineralogical and fluid inclusion studies are important methods that can be used to help solve the complex growth history of sulfides that are and have been accumulating at mid-ocean ridge vent sites.</p> / Thesis / Bachelor of Science (BSc)
|
10 |
Fluid History of the Peach Bottom Slate and Adjacent Units, Southeastern PennsylvaniaMarkham, Jennifer Lynn 29 July 2009 (has links)
No description available.
|
Page generated in 0.5783 seconds