1 |
The regeneration of sulphated limestoneTucker, Richard Frank January 1987 (has links)
Fluidised bed combustion offers potential advantages over conventional power generation systems, particularly with respect to sulphur capture using injected limestone. The stone calcines on entry to the hot bed, forming CaO, and then reacts with SO<SUB>2</SUB> to produce CaSO<SUB>4</SUB>. Regenerative schemes aim to reduce the sorbent loading by stripping off the sulphur from the spent limestone which is then reused. This subject of this dissertation is an investigation into the fundamentals of the regeneration of sulphated limestone by reductive decomposition. Following a detailed discussion of the thermodynamic limitations on the reaction system, attention is focussed on the kinetics of the reductive decomposition scheme. The results of a study on the reaction of CaSO<SUB>4</SUB> powder with CO are reported. This made use of two experimental techniques, X-ray powder diffraction and thermogravimetric analysis. These experiments highlighted the major features of the reaction scheme and allowed the study of two special cases, the sulphidation of CaSO<SUB>4</SUB> to produce CaS only and the solid-solid reaction between CaS and CaSO<SUB>4</SUB>. The major experimental technique used for this work was the batch addition of limestone to a fluidised bed. After a brief discussion of the results of sulphation experiments, typical regeneration experiments are described. By varying the test conditions as well as performing several special experiments, a mechanism for the overall reaction is deduced. The effect of the operating variables on the product split is then explicable. The evidence suggests that the closed pores resulting from the sulphation reaction lead to strong diffusion resistance on regeneration which controls the rate during the early and middle stages. By utilising high CO<SUB>2</SUB> concentrations the formation of CaS was inhibited; the reaction was then amenable to quantitative analysis which revealed an approximate first order dependence on CO concentration and an activation energy of 110kJ/mol. One method for reducing the quantities of CaS produced is to operate the fluidised bed in a two-zone fashion i.e. with oxidising and reducing regions. An investigation into this reactor configuration is included with particular attention paid to the oxidation of CaS. The results obtained are explicable in terms of the results from the single zone bed and allow the effects of operating variables on the reactor performance to be predicted. Finally, the mathematical modelling of the gas-solid reactions is considered. The changing grain size model is introduced by considering the sulphation of limestone. The final conditions from this model then form the initial conditions for the regeneration model, which considers mildly reducing conditions only. The final model then uses as a basis the mechanism proposed in chapter 5 and is applied to the thermogravimetric analysis results.
|
2 |
Characterisation of Fuels and Fly Ashes from Co-Combustion of Biofuels and Waste Fuels in a Fluidised Bed Boiler. A Phosphorus and Alkali PerspectivePettersson, Anita January 2008 (has links)
In the efforts to create sustainable production of heat and power and to reduce the net CO2 emissions to the atmosphere, alternative fuels are today being utilised. These fuels are, for example, biofuels and waste derived fuels such as different residues from the agricultural sector and the pulp and paper industry, municipal sewage sludge and municipal sorted solid waste. These fuels put new demands on the combustion facilities due to their chemical composition and this in turn calls for methods of prediction for the evaluation of their combustion behaviour. Most significant for the majority of these fuels are the high alkali and chlorine concentrations which cause bed agglomeration, deposit formation and corrosion on heat transfer surfaces. These problems can be solved if sufficient knowledge is obtained of the specific fuel or fuel mix. In this work, chemical fractionation, a step by step leaching method, was used on fuels, fuel mixes and fly ashes from co-combustion in a fluidised bed combustor. In addition, XRD and SEM-EDX were used for the fuel and fly ash characterisation. Different alkali chloride reducing additives i.e. kaolin, zeolites and sulphur were investigated as was the influence of various bed materials: silica sand, olivine sand and blast furnace slag (BFS). Some of the new, alternative fuels, such as municipal sewage sludge and meat and bone meal (MBM) contain high concentrations of phosphorus which is a very important nutrient essential in many biological processes. Phosphorus rock used as raw material in the phosphate industry is a depleting natural resource estimated to last for only 30-200 years according to different sources. The combustion of municipal sewage sludge enriches the phosphorus in the ashes while hazardous components such as pathogens and organic pollutants are rendered harmless after combustion. However, toxic heavy metals are also enriched in the ashes. One aim of the work was to find a sufficiently effective and low cost method for phosphorus extraction from fly ashes derived from municipal sewage sludge combustion. Two types of municipal sewage sludges were investigated using different chemicals for the phosphorus cleaning step in the waste water treatment plants. The first sewage sludge derived from a plant using iron sulphate as flocculant to precipitate phosphorus as iron phosphate. The second sludge meanwhile came from a plant using aluminium sulphate as flocculant to precipitate phosphorus as aluminium phosphate. Both sewage sludges were dewatered prior to combustion and co-combusted with wood pellets. At pH 1 nearly all the phosphorus was released from the fly ash derived from the sewage sludge where aluminium sulphate was used as a phosphorus precipitation agent. Iron sulphate as precipitant inhibited the phosphorus extraction from the ashes, resulting in only 50-80% of the phosphorus being released. Furthermore, the mobility of heavy metals to the leachates was investigated to establish whether the leachates were suitable as fertilisers. Only minor fractions of Pd, Hg, Cr, Cu, Mn, Co, Ni, As, Sb, V and Zn were found in the leachates, all well within the legislated limitations for fertilisers. However, one exception was Cd that was nearly totally dissolved in the leachate. Thus a decadmiation of the leachate is necessary prior to any utilisation of the ashes and reuse of phosphorus as fertiliser. / <p>Akademisk avhandling för avläggande av teknologie doktorsexamen vid Chalmers tekniska högskola försvaras vid offentlig disputation den 15 oktober 2008</p>
|
3 |
Opportunities and uncertainties in the early stages of development of CO2 capture and storageLind, Mårten January 2009 (has links)
The topic of this thesis is carbon dioxide (CO2) capture and storage (CCS), which is a technology that is currently being promoted by industries, scientists and governments, among others, in order to mitigate climate change despite a continued use of fossil fuels. Because of the complex nature of CCS and the risks it entails, it is controversial. The aim of this thesis is to analyse how the technology may be further developed in a responsible manner. In the first part of the thesis different methods for capturing CO2 from industrial processes as well as power plants are analysed. The aim is to identify early opportunities for CO2 capture, which is considered important because of the urgency of the climate change problem. Three potential early opportunities are studied: i) capturing CO2 from calcining processes such as cement industries by using the oxyfuel process, ii) capturing CO2 from pressurised flue gas, and iii) capturing CO2 from hybrid combined cycles. Each opportunity has properties that may make them competitive in comparison to the more common alternatives if CCS is realised. However, there are also drawbacks. For example, while capturing CO2 from pressurised flue gas enables the use of more compact capture plant designs as well as less expensive and less toxic absorbents, the concept is neither suitable for retrofitting nor has it been promoted by the large and influential corporations. The second part of the thesis has a broader scope than the first and is multidisciplinary in its nature with inspiration from the research field of Science and Technology Studies (STS). The approach is to critically analyse stakeholder percep-tions regarding CCS, with a specific focus on the CCS experts. The thesis sheds new light on the complexity and scientific uncertainty of CCS as well as on the optimism among many of its proponents. Because of the uncertain development when it comes to climate change, fossil fuel use and greenhouse gas emissions, the conclusion is that CCS has to be further developed and demonstrated. A responsible strategy for a future development of CCS would benefit from: i) a search for win-win strategies, ii) increasing use of appropriate analytical tools such as life-cycle analysis, iii) a consideration of fossil fuel scarcity and increasing price volatility, iv) funding of unbiased research and v) increasing simultaneous investments in long-term solutions such as renewable energy alternatives and efficiency improvements. / QC 20100727
|
Page generated in 0.1356 seconds