Flight and drop tests of the Martin 270 (M270) seaplane were conducted in 1955. Theoretical and empirical pressures were determined by use of Wagner’s theory and also by the Code of Federal Regulations (CFR). The pressure results from the experimental tests on the hull were compared with pressures calculated from Wagner’s theory to determine how well the theory correlated with the measured pressures. The experimental pressure data was also compared with the CFR results to determine how the current industry standard of estimating impact loads compares with actual pressures a seaplane is subjected to. Using the structural design and geometry of the M270 the seaplane hull was modeled in Maestro with a coarse mesh finite element model. The pressures from Wagner’s theory and the CFR were applied to the model of the M270 hull. The structural reactions of the drop test section were compared with the reactions determined from Maestro.

My master´s thesis deals with the design of amphibian hull for VUT 001 Marabu aircraft. Part of this work is aerodynamic and hydrodynamics design of hull including flight mechanics with, take of and landing on the water. The last point of work is load calculation of float and landing gear and design of landing gear retraction mechanics.