abstract: Blockchain scalability is one of the issues that concerns its current adopters. The current popular blockchains have initially been designed with imperfections that in- troduce fundamental bottlenecks which limit their ability to have a higher throughput and a lower latency. One of the major bottlenecks for existing blockchain technologies is fast block propagation. A faster block propagation enables a miner to reach a majority of the network within a time constraint and therefore leading to a lower orphan rate and better profitability. In order to attain a throughput that could compete with the current state of the art transaction processing, while also keeping the block intervals same as today, a 24.3 Gigabyte block will be required every 10 minutes with an average transaction size of 500 bytes, which translates to 48600000 transactions every 10 minutes or about 81000 transactions per second. In order to synchronize such large blocks faster across the network while maintain- ing consensus by keeping the orphan rate below 50%, the thesis proposes to aggregate partial block data from multiple nodes using digital fountain codes. The advantages of using a fountain code is that all connected peers can send part of data in an encoded form. When the receiving peer has enough data, it then decodes the information to reconstruct the block. Along with them sending only part information, the data can be relayed over UDP, instead of TCP, improving upon the speed of propagation in the current blockchains. Fountain codes applied in this research are Raptor codes, which allow construction of infinite decoding symbols. The research, when applied to blockchains, increases success rate of block delivery on decode failures. / Dissertation/Thesis / Masters Thesis Computer Science 2018

No description available.

Technological innovation that empowers tiny low-cost transceivers to operate with a high degree of utilisation efficiency in multihop wireless mesh networks is contributed in this dissertation. Transmission scheduling and joint source-channel-network coding are two of the main aspects that are addressed. This work focuses on integrating recent enhancements such as wireless network coding and temporal reuse into a cross-layer optimisation framework, and to design a joint coding scheme that allows for space-optimal transceiver implementations. Link-assigned transmission schedules with timeslot reuse by multiple links in both the space and time domains are investigated for quasi-stationary multihop wireless mesh networks with both rate and power adaptivity. Specifically, predefined cross-layer optimised schedules with proportionally fair end-to-end flow rates and network coding capability are constructed for networks operating under the physical interference model with single-path minimum hop routing. Extending transmission rights in a link-assigned schedule allows for network coding and temporal reuse, which increases timeslot usage efficiency when a scheduled link experiences packet depletion. The schedules that suffer from packet depletion are characterised and a generic temporal reuse-aware achievable rate region is derived. Extensive computational experiments show improved schedule capacity, quality of service, power efficiency and benefit from opportunistic bidirectional network coding accrued with schedules optimised in the proposed temporal reuse-aware convex capacity region. The application of joint source-channel coding, based on fountain codes, in the broadcast timeslot of wireless two-way network coding is also investigated. A computationally efficient subroutine is contributed to the implementation of the fountain compressor, and an error analysis is done. Motivated to develop a true joint source-channel-network code that compresses, adds robustness against channel noise and network codes two packets on a single bipartite graph and iteratively decodes the intended packet on the same Tanner graph, an adaptation of the fountain compressor is presented. The proposed code is shown to outperform a separated joint source-channel and network code in high source entropy and high channel noise regions, in anticipated support of dense networks that employ intelligent signalling. AFRIKAANS : Tegnologiese innovasie wat klein lae-koste kommunikasie toestelle bemagtig om met ’n hoë mate van benuttings doeltreffendheid te werk word bygedra in hierdie proefskrif. Transmissie-skedulering en gesamentlike bron-kanaal-netwerk kodering is twee van die belangrike aspekte wat aangespreek word. Hierdie werk fokus op die integrasie van onlangse verbeteringe soos draadlose netwerk kodering en temporêre herwinning in ’n tussen-laag optimaliserings raamwerk, en om ’n gesamentlike kodering skema te ontwerp wat voorsiening maak vir spasie-optimale toestel implementerings. Skakel-toegekende transmissie skedules met tydgleuf herwinning deur veelvuldige skakels in beide die ruimte en tyd domeine word ondersoek vir kwasi-stilstaande, veelvuldige-sprong draadlose rooster netwerke met beide transmissie-spoed en krag aanpassings. Om spesifiek te wees, word vooraf bepaalde tussen-laag geoptimiseerde skedules met verhoudings-regverdige punt-tot-punt vloei tempo’s en netwerk kodering vermoë saamgestel vir netwerke wat bedryf word onder die fisiese inmengings-model met enkel-pad minimale sprong roetering. Die uitbreiding van transmissie-regte in ’n skakel-toegekende skedule maak voorsiening vir netwerk kodering en temporêre herwinning, wat tydgleuf gebruiks-doeltreffendheid verhoog wanneer ’n geskeduleerde skakel pakkie-uitputting ervaar. Die skedules wat ly aan pakkie-uitputting word gekenmerk en ’n generiese temporêre herwinnings-bewuste haalbare transmissie-spoed gebied word afgelei. Omvattende berekenings-eksperimente toon verbeterde skedulerings kapasiteit, diensgehalte, krag doeltreffendheid asook verbeterde voordeel wat getrek word uit opportunistiese tweerigting netwerk kodering met die skedules wat geoptimiseer word in die temporêre herwinnings-bewuste konvekse transmissie-spoed gebied. Die toepassing van gesamentlike bron-kanaal kodering, gebaseer op fontein kodes, in die uitsaai-tydgleuf van draadlose tweerigting netwerk kodering word ook ondersoek. ’n Berekenings-effektiewe subroetine word bygedra in die implementering van die fontein kompressor, en ’n foutanalise word gedoen. Gemotiveer om ’n ware gesamentlike bron-kanaal-netwerk kode te ontwikkel, wat robuustheid byvoeg teen kanaal geraas en twee pakkies netwerk kodeer op ’n enkele bipartiete grafiek en die beoogde pakkie iteratief dekodeer op dieselfde Tanner grafiek, word ’n aanpassing van die fontein kompressor aangebied. Dit word getoon dat die voorgestelde kode ’n geskeide gesamentlike bron-kanaal en netwerk kode in hoë bron-entropie en ho¨e kanaal-geraas gebiede oortref in verwagte ondersteuning van digte netwerke wat van intelligente sein-metodes gebruik maak. / Dissertation (MEng)--University of Pretoria, 2011. / Electrical, Electronic and Computer Engineering / unrestricted

One of the most important technologies used in modern communication systems is channel coding. Channel coding dates back to a paper published by Shannon in 1948 [1] entitled “A Mathematical Theory of Communication”. The basic idea behind channel coding is to send redundant information (parity) together with a message to make the transmission more error resistant. There are different types of codes that can be used to generate the parity required, including block, convolutional and concatenated codes. A special subclass of codes consisting of the codes mentioned in the previous paragraph, is sparse graph codes. The structure of sparse graph codes can be depicted via a graphical representation: the factor graph which has sparse connections between its elements. Codes belonging to this subclass include Low-Density-Parity-Check (LDPC) codes, Repeat Accumulate (RA), Turbo and fountain codes. These codes can be decoded by using the belief propagation algorithm, an iterative algorithm where probabilistic information is passed to the nodes of the graph. This dissertation focuses on noisy decoding of fountain codes using belief propagation decoding. Fountain codes were originally developed for erasure channels, but since any factor graph can be decoded using belief propagation, noisy decoding of fountain codes can easily be accomplished. Three fountain codes namely Tornado, Luby Transform (LT) and Raptor codes were investigated during this dissertation. The following results were obtained: <ol> <li>The Tornado graph structure is unsuitable for noisy decoding since the code structure protects the first layer of parity instead of the original message bits (a Tornado graph consists of more than one layer).</li> <li> The successful decoding of systematic LT codes were verified.</li> <li>A systematic Raptor code was introduced and successfully decoded. The simulation results show that the Raptor graph structure can improve on its constituent codes (a Raptor code consists of more than one code).</li></ol> Lastly an LT code was used to replace the convolutional incremental redundancy scheme used by the 2G mobile standard Enhanced Data Rates for GSM Evolution (EDGE). The results show that a fountain incremental redundancy scheme outperforms a convolutional approach if the frame lengths are long enough. For the EDGE platform the results also showed that the fountain incremental redundancy scheme outperforms the convolutional approach after the second transmission is received. Although EDGE is an older technology, it still remains a good platform for testing different incremental redundancy schemes, since it was one of the first platforms to use incremental redundancy. / Dissertation (MEng)--University of Pretoria, 2008. / Electrical, Electronic and Computer Engineering / MEng / unrestricted