This thesis explores the clock and data recovery (CDR) for the high-speed blind-sampling ADC-based receivers. This exploration results in two new CDR architectures that reduce the receiver complexity and save the ADC power and area compared to the previous work. The two proposed CDR architectures constitute the primary contributions of this thesis. The first proposed architecture, a 2x feed-forward CDR architecture, eliminates the interpolating feedback loop, used in the previously reported CDRs, in order to reduce the CDR circuit complexity. Instead of the feedback loop, the proposed architecture uses a feed-forward topology to recover the phase and data directly from the blind digital samples of the received signal. The 2x feed-forward CDR architecture was implemented and characterized in a 5 Gb/s receiver test-chip in 65 nm CMOS. The test-chip measurements confirm that the CDR successfully recovers the data with bit error rate (BER) < 10e-12 in the presence of jitter. The second proposed architecture, a fractional-sampling-rate (FSR) CDR architecture, reduces the receiver sampling rate from the typical integer rate of 2x the baud rate to a fractional rate between 2x and 1x in order to reduce the ADC power and area. This architecture employs the feed-forward topology of the first contribution of this thesis to recover the phase and data from the fractionally-spaced digital samples of the signal. To verify the proposed FSR CDR architecture, a 1.45x receiver test-chip was implemented and characterized in 65 nm CMOS. This test-chip recovers 6.875 Gb/s data from the ADC samples taken at 10 GS/s. The measurements confirm a successful data recovery in the presence of jitter with BER < 10e-12. With sampling at 1.45x, the FSR CDR architecture reduces the ADC power and area by 27.3% compared to the 2x feed-forward CDR architecture, while the overall receiver power and area are reduced by 12.5%.

This thesis explores the clock and data recovery (CDR) for the high-speed blind-sampling ADC-based receivers. This exploration results in two new CDR architectures that reduce the receiver complexity and save the ADC power and area compared to the previous work. The two proposed CDR architectures constitute the primary contributions of this thesis. The first proposed architecture, a 2x feed-forward CDR architecture, eliminates the interpolating feedback loop, used in the previously reported CDRs, in order to reduce the CDR circuit complexity. Instead of the feedback loop, the proposed architecture uses a feed-forward topology to recover the phase and data directly from the blind digital samples of the received signal. The 2x feed-forward CDR architecture was implemented and characterized in a 5 Gb/s receiver test-chip in 65 nm CMOS. The test-chip measurements confirm that the CDR successfully recovers the data with bit error rate (BER) < 10e-12 in the presence of jitter. The second proposed architecture, a fractional-sampling-rate (FSR) CDR architecture, reduces the receiver sampling rate from the typical integer rate of 2x the baud rate to a fractional rate between 2x and 1x in order to reduce the ADC power and area. This architecture employs the feed-forward topology of the first contribution of this thesis to recover the phase and data from the fractionally-spaced digital samples of the signal. To verify the proposed FSR CDR architecture, a 1.45x receiver test-chip was implemented and characterized in 65 nm CMOS. This test-chip recovers 6.875 Gb/s data from the ADC samples taken at 10 GS/s. The measurements confirm a successful data recovery in the presence of jitter with BER < 10e-12. With sampling at 1.45x, the FSR CDR architecture reduces the ADC power and area by 27.3% compared to the 2x feed-forward CDR architecture, while the overall receiver power and area are reduced by 12.5%.