Spelling suggestions: "subject:"full cell."" "subject:"fue cell.""
31 |
The design and evaluation of a water delivery system for evaporative cooling of a proton exchange membrane fuel cellAl-Asad, Dawood Khaled Abdullah 02 June 2009 (has links)
An investigation was performed to demonstrate system design for the delivery of
water required for evaporative cooling of a proton exchange membrane fuel cell
(PEMFC). The water delivery system uses spray nozzles capable of injecting water
directly and uniformly to the nickel metal foam flow-field (element for distributing the
reactant gases over the surface of the electrodes) on the anode side from which water can
migrate to the cathode side of the cell via electroosmotic drag. For an effective overall
cooling, water distribution over the surface of the nickel foam has to be uniform to avoid
creation of hotspots within the cell. A prototype PEMFC structure was constructed
modeled after a 35 kW electrical output PEMFC stack. Water was sprayed on the nickel
metal foam flow-field using two types of nozzle spray, giving conical fog type flow and
flat fan type flow. A detailed investigation of the distribution pattern of water over the
surface of the nickel metal flow field was conducted. The motive behind the
investigation was to determine if design parameters such as type of water flow from
nozzles, vertical location of the water nozzles above the flowfield, area of the nozzles, or
operating variables such as reactant gas flow had any effect on water distribution over
the surface of the Ni-metal foam flow field. It was found that the design parameters
(types of flow, area and location of the nozzle) had a direct impact on the distribution of
water in the nickel metal foam. However, the operating variable, reactant gas flow,
showed no effect on the water distribution pattern in the Ni-foam.
|
32 |
Evaluation of Gas Turbine Cogeneration with Fuel CellLe, Fang-Chi 25 July 2000 (has links)
none
|
33 |
Fuel cells as a backup energy source for high availability network serversHumphrey, Daniel Alan 10 October 2008 (has links)
This thesis proposes an uninterruptible power supply, UPS for high availability
servers with fuel cells as its back up energy source. The system comprises a DC to DC
converter designed to accommodate the fuel cellâ s wide output voltage range. A server
power supply is specified, designed and simulated for use with this UPS. The UPS
interfaces internal to the server power supply, instead of providing standard AC power.
This topology affords enhanced protection from faults and increases overall efficiency of
the system by removing power conversions. The UPS is simulated with the designed
power supply to demonstrate its effectiveness.
|
34 |
Fuel cell based battery-less ups systemVenkatagiri Chellappan, Mirunalini 10 October 2008 (has links)
With the increased usage of electrical equipment for various applications, the
demand for quality power apart from continuous power availability has increased and
hence requires the development of appropriate power conditioning system. A major
factor during development of these systems is the requirement that they remain
environment-friendly. This cannot be realized using the conventional systems as they
use batteries and/or engine generators. Among various viable technologies, fuel cells
have emerged as one of the most promising sources for both portable and stationary
applications.
In this thesis, a new battery less UPS system configuration powered by fuel cell is
discussed. The proposed topology utilizes a standard offline UPS module and the battery
is replaced by a supercapacitor. The system operation is such that the supercapacitor
bank is sized to support startup and load transients and steady state power is supplied by
the fuel cell. Further, the fuel cell runs continuously to supply 10% power in steady
state. In case of power outage, it is shown that the startup time for fuel cell is reduced
and the supercapacitor bank supplies power till the fuel cell ramps up from supplying 10% load to 100% load. A detailed design example is presented for a 200W/350VA 1-
phase UPS system to meet the requirements of a critical load. The equivalent circuit and
hence the terminal behavior of the fuel cell and the supercapacitor are considered in the
analysis and design of the system for a stable operation over a wide range. The steady
state and transient state analysis were used for stability verification.
Hence, from the tests such as step load changes and response time measurements, the
non-linear model of supercapacitor was verified. Temperature rise and fuel consumption
data were measured and the advantages of having a hybrid source (supercapacitor in
parallel with fuel cell) over just a standalone fuel cell source were shown. Finally, the
transfer times for the proposed UPS system and the battery based UPS system were
measured and were found to be satisfactory. Overall, the proposed system was found to
satisfy the required performance specifications.
|
35 |
Effect of Crude Glycerol from Biodiesel Production on the Performance and Anaerobic Metabolism of Catalysts in a Glycerol Oxidizing Microbial Fuel CellSivell, Jamie-lynn 16 April 2014 (has links)
Use of waste glycerol as fuel in microbial fuel cells (MFCs) would result in the production of valuable metabolites and electricity, to the benefit of biodiesel operations. In this research, the effect of salt and other compounds found in waste glycerol from biodiesel production on the metabolism and performance of three cultures (Escherichia coli W3110, Propionibacterium freudenreichii ssp. shermanii and mixed culture AR2), used as anodic catalysts in an MFC was studied. MFC experiments were performed in parallel with serum bottle fermentations to allow for comparison of glycerol consumption and metabolite yield. The effect of salt content on the performance of all three cultures was positive in most cases and negligible in others. Using waste glycerol with an increased concentration of other compounds (other than salt) only reduced the performance of AR2, however an inhibitory effect on the rate of glycerol consumption was observed with both AR2 and P. freudenreichii ssp. shermanii. For all strains, the rate of glycerol consumption was slower in MFCs than in fermentations as a result of the electrochemical environment; the yield of various metabolites also differed.
|
36 |
Nitrogen-Doped Carbon Materials as Oxygen Reduction Reaction Catalysts for Metal-Air Fuel Cells and BatteriesChen, Zhu January 2012 (has links)
Metal air battery has captured the spotlight recently as a promising class of sustainable energy storage for the future energy systems. Metal air batteries offer many attractive features such as high energy density, environmental benignity, as well as ease of fuel storage and handling. In addition, wide range of selection towards different metals exists where different energy capacity can be achieved via careful selection of different metals. The most energy dense systems of metal-air battery include lithium-air, aluminum-air and zinc-air. Despite the choice of metal electrode, oxygen reduction (ORR) occurs on the air electrode and oxidation occurs on the metal electrode. The oxidation of metal electrode is a relatively facile reaction compared to the ORR on the air electrode, making latter the limiting factor of the battery system. The sluggish ORR kinetics greatly affects the power output, efficiency, and lifetime of the metal air battery. One solution to this problem is the use of active, affordable and stable catalyst to promote the rate of ORR. Currently, platinum nanoparticles supported on conductive carbon (Pt/C) are the best catalyst for ORR. However, the prohibitively high cost and scarcity of platinum raise critical issues regarding the economic feasibility and sustainability of platinum-based catalysts. Cost reduction via the use of novel technologies can be achieved by two approaches. The first approach is to reduce platinum loading in the catalyst formulation. Alternatively platinum can be completely eliminated from the catalyst composition. The aim of this work is to identify and synthesize alternative catalysts for ORR toward metal air battery applications without the use of platinum re other precious metals (i.e., palladium, silver and gold).
Non-precious metal catalysts (NPMC) have received immense international attentions owing to the enormous efforts in pursuit of novel battery and fuel cell technologies. Different types of NPMC such as transition metal alloys, transition metal or mixed metal oxides, chalcogenides have been investigated as potential contenders to precious metal catalysts. However, the performance and stability of these catalysts are still inferior in comparison. Nitrogen-doped carbon materials (NCM) are an emerging class of catalyst exhibiting great potential towards ORR catalysis. In comparison to the metal oxides, MCM show improved electrical conductivity. Furthermore, NCM exhibit higher activity compared to chalcogenides and transition metal alloys. Additional benefits of NCM include the abundance of carbon source and environmental benignity. Typical NCM catalyst is composed of pyrolyzed transition metal macrocycles supported by high surface area carbon. These materials have demonstrated excellent activity and stability. However, the degradation of these catalysts often involves the destruction of active sites containing the transition metal centre. To further improve the durability and mass transport of NCM catalyst, a novel class of ORR catalyst based on nitrogen-doped carbon nanotubes (NCNT) is investigated in a series of studies.
The initial investigation focuses on the synthesis of highly active NCNT using different carbon-nitrogen precursors. This study investigated the effect of using cyclic hydrocarbon (pyridine) and aliphatic hydrocarbon (ethylenediamine) towards the formation and activity of NCNT. The innate structure of the cyclic hydrocarbon promotes the formation of NCNT to provide higher product yield; however, the aliphatic hydrocarbon promotes the formation of surface defects where the nitrogen atoms can be incorporated to form active sites for ORR. As a result, a significant increase in the ORR activity of 180 mV in half-wave potential is achieved when EDA was used as carbon-nitrogen precursor. In addition, three times higher limiting current density was observed for the NCNT synthesized from ethylenediamine.
Based on the conclusion where highly active NCNT was produced from aliphatic hydrocarbon, similar carbon-nitrogen precursors with varying carbon to nitrogen ratio in the molecular structure (ethylenediamine, 1, 3-diaminopropane, 1, 4-diaminobutane) were adapted for the synthesis of NCNT. The investigation led to the conclusion that higher nitrogen to carbon ratio in the molecular structure of the precursors benefits the formation of active NCNT for ORR catalysis. The origin of such phenomena can be correlated with the higher relative nitrogen content of the resultant NCNT synthesized from aliphatic carbon precursor that provided greater nitrogen to carbon ratio. As the final nitrogen content increased in the molecular structure, the half-wave potential of the resultant NCNT towards ORR catalysis was increased by 120 mV. The significant improvement hints the critical role of nitrogen content towards ORR catalysis.
To further confirm the correlation between the nitrogen content and ORR activity, another approach was used to control the final nitrogen content in the resultant NCNT. In the third investigation, a carbon-nitrogen precursor (pyridine) was mixed with a carbon precursor (ethanol) to form an admixture. The relative proportion of the two components of the admixture was varied to produce NCNT with different nitrogen content. By adopting this methodology, potential effect of different carbon-nitrogen precursors on the formation of NCNT can be eliminated since the same precursors were used for NCNT synthesis. Based on the electrochemical evaluations, the nitrogen content can be positively correlated to ORR activity. Among the NCNT samples, 41% higher limiting current density was achieved for 0.7 at. % increase in overall nitrogen content. Furthermore, the selectivity of the NCNT catalyst with higher nitrogen content favours the production of water molecule—the favourable product in metal-air battery by 43%.
ORR catalyst is an outer-sphere electron transfer reaction whereby the reactants interact with the surface of catalysts. Consequently, the surface structure can be a determining factor towards the ORR activity of the NCNT in addition to the nitrogen content. In the forth investigation, the surface structure of NCNT was tailored to differentiate the ORR activity of smooth and rugged surface while controlling the overall nitrogen content to be similar. NCNT having different surface structures but similar nitrogen content (approximately 2.7 to 2.9 at. %) were successfully synthesized using different synthesis catalysts. Comparison of the two NCNT catalysts showing different surface structure resulted in a 130 mV increased in half-wave potential favouring the NCNT with more rugged surface structure. This study provided insights to the potential effects of synthesis catalyst towards directing the surface structure and the ORR activity of NCNT.
Through a series of studies, the important parameters affecting the ORR performance of NCNT were elucidated and the most active NCNT catalyst synthesized was used for testing in a prototype zinc-air battery. The fifth study evaluated the performance of NCNT catalyst in different concentrations of alkaline electrolyte and at different battery voltage. An increase in the electrolyte’s alkaline strength improved the battery performance to a certain degree until the increasing viscosity impeded the performance of the battery system. The zinc-air battery employing NCNT as ORR catalyst produced a maximum battery power density of 69.5 mWcm-2 in 6M potassium hydroxide. The fifth study illustrated the great potential of NCNT towards the ORR catalysis for metal-air batteries.
In combination, the series of investigations presented in this document provide a comprehensive study of a novel material and its application towards ORR catalysis in metal air batteries. Specifically, this report provides insights into the fundamentals of NCNT synthesis; the origins of ORR activity and the optimal operating conditions of NCNT in a prototype zinc-air battery. The excellent performance of NCNT warrants further studies of this material in greater details, and the information presented in this document will create a basis for future investigations towards ORR catalysis.
|
37 |
Nanostructured Materials Supported Oxygen Reduction Catalysts in Polymer Electrolyte Membrane Fuel CellsChoi, Ja-Yeon 23 April 2013 (has links)
Polymer electrolyte membrane (PEM) fuel cells have been viewed as promising power source candidates for transport, stationary, and portable applications due to their high efficiency and low emissions. The platinum is the most commonly used catalyst material for the oxygen reduction reaction (ORR) at the cathode of PEM fuel cells; however, the limited abundance and high cost of platinum hinder the large-scale commercialization of fuel cells. To overcome this limitation, it is necessary to enhance the catalyst utilization in order to improve the catalytic activity while decreasing or eliminating the use of platinum.
The material on which the catalyst is supported is important for the high dispersion and narrow distribution of Pt nanoparticles as well as other non-precious metal active sites, and these characteristics are closely related to electrocatalytic activity of the catalysts. The support materials can influence the catalytic activity by interplaying with catalytic metals, and the durability of the catalyst is also greatly dependent on its support. A variety of support materials like carbons, oxides, carbides, and nitrides have been employed as supports materials for fuel cell catalysts, and much effort has been devoted to the synthesis of the novel carbon supports with large surface area and/or pore volume, including nanostructured carbons such as carbon nanotubes (CNTs), carbon nanofibers, and mesoporous carbon. These novel nanostructured carbon materials have achieved promising performance in terms of catalytic activity and durability. However, there is still enormous demand and potential for the catalysts to improve.
In the first study, non-precious metal catalysts (NPMC) for the oxygen reduction reaction were synthesized by deposition of Fe/Co-Nx composite onto nanoporous carbon black with ethylenediamine (EDA) as nitrogen precursor. Two different nanoporous carbon supports, Ketjen Black EC300J (KJ300) and EC600JD (KJ600), were used as catalyst support for the non-precious catalysts. The results obtained from the optimized FeCo/EDA-carbon catalyst, using KJ600 as the support, showed improved onset, half-wave potentials and superior selectivity than that of the KJ300. Similarly, the catalyst showed good performance in the hydrogen-oxygen PEM fuel cell. At a cell voltage of 0.6 V the fuel cell managed to produce 0.37 A/cm2 with a maximum power density of 0.44 W/cm2. Fuel cell life test at a constant voltage of 0.40 V demonstrated promising stability up to 100 h. The X-ray photoelectron spectroscopy study indicated that pyridinic type nitrogen of the non-precious metal catalysts is critical for ORR catalytic activity and selectivity. These results suggest higher pore volume and surface area of carbon support could lead to higher nitrogen content providing more active sites for ORR and this type of catalyst has great potential used as a non-precious PEM fuel cell catalyst.
In the second study, we report the development of a novel NPMC in acid electrolyte using pyrimidine-2,4,5,6-tetramine sulfuric acid hydrate (PTAm) as a nitrogen precursor and graphene nanosheets as catalyst supports. Graphene, consisting of a two-dimensional (2D) monolayer of graphitic carbon atoms, has been viewed as a promising candidate for the fuel cell catalyst support, due to its many intriguing properties such as high aspect ratios, large surface areas, rich electronic states, good electron transport, thermal/chemical stability and good mechanical properties. We investigate the effect of different pyrolysis temperatures on the catalysts’ ORR activity along with detailed surface analysis to provide insight regarding the nature of the ORR active surface moieties. This novel NPMC demonstrates promising electrocatalyst activity and durability superior to that of commercial catalyst for the ORR, rendering graphene nanosheets as a suitable replacement to traditional nanostructured carbon support materials.
In the final study, we have developed Pt catalyst by combining the precious metal with nitrogen-doped activated graphene (N-AG) as the support. A transmission electron microscopy (TEM) image of the catalyst shows uniform size and distribution of platinum nanoparticles on a graphene layer. This novel catalyst demonstrates superior electrocatalyst activity and durability over Pt/XC72 catalyst for ORR under the studied conditions, rendering graphene as an ideal replacement to traditional nanostructured carbon support materials.
In summary, several catalyst samples were made using novel nanostructured support materials to improve the ORR performance. Several recommendations for future work were suggested in the last section of this work to further apply the knowledge and understanding of nanostructured support materials to design a highly active, durable, and low-cost NPMCs and platinum catalysts.
|
38 |
Z-source inverter design, analysis, and its application in fuel cell vehiclesShen, Miaosen. January 2006 (has links)
Thesis (Ph. D.)--Michigan State University. Dept. of Electrical and Computer Engineering, 2006. / Title from PDF t.p. (viewed on Nov. 17, 2008) Includes bibliographical references (p. 168-175). Also issued in print.
|
39 |
Synthesis and evaluation of non-platinum catalysts for a novel hydrogen fuel cell cathodeSmith, Thomas January 2014 (has links)
Current state-of-the-art fuel cells depend on relatively high quantities of platinum metal to function. For fuel cells to become economically feasible as a replacement for the internal combustion engine there needs to be a drastic reduction in the quantity of platinum used within them. ACAL Energy has developed a fuel cell that allows for an 80 % reduction in the quantity of platinum required. This is achieved by replacing the solid supported cathode with an aqueous catholyte solution that contains within it a non-precious metal catalyst. The work contained in this thesis explores a library of non-heme metal complexes as potential candidates for use as catalysts for the 4 electron oxygen reduction reaction at the cathode of the FlowCath® fuel cell. The catalysts chosen, Fe(II) TPEN, Fe(II) TRILEN and Fe(II) TPTCN, are super oxidise dismutase mimics and are known to effectively reduce oxygen in a homogeneous solution. These catalysts were studied in fuel cell-like conditions to gain an understanding of their effectiveness in reducing oxygen. Attempts to decorate the complexes with sulfonate groups led to the evolution of the isoquinoline-based complexes. The change from pyridine-based complexes to isoquinoline-based complexes led to the formation of six alternative complexes, Fe(II) 1-miq TQEN, Fe(II) 3-miq TQEN, Fe(II) 1-miq TRILEN, Fe(II) 3-miq TRILEN, Fe(II) 1-miq TQTCN and Fe(II) 3-miq TQTCN, four of which (1-/3-miq TRILEN and 1-/3-TQTCN) are new to the academic literature. These complexes were analysed for their use as catalysts in the oxygen reduction reaction. In addition to the synthetic and analytical work carried out, computational models of the complexes were created. This theoretical data gave a deeper insight into the molecular structure of the complexes studied and the spin states of the Fe(II) and Fe(III) species.
|
40 |
High temperature materials chemistry of doped cerium oxide ceramicsLiddicott, Katherine Mary January 1994 (has links)
No description available.
|
Page generated in 0.3134 seconds