11 |
Processamento e caracterização de material compósito polimérico obtido com nanotubo de carbono funcionalizado / Processing and characterization of polymeric composite material obtained with functionalized carbon nanotubeLebrão, Guilherme Wolf 11 December 2013 (has links)
Desenvolveu-se neste trabalho um procedimento para incorporação de nanotubos de carbono (NTC) em uma resina fenol / epóxi a ser utilizado como matriz de um compósito de fibra de carbono. Realizando para tal, a oxidação dos NTC com o uso de micro-ondas e sua funcionalização com 3-amino-propil-tri-etoxi-silano, usado com agente de acoplamento entre a resina e o NTC. Após o processamento, como resultado da adição dos NTC na resina, obteve-se um aumento na sua temperatura de transição vítrea e uma melhora no limite de resistência à flexão e impacto. No material compósito fibra de carbono, obtido por laminação manual, onde a resina fenol / epóxi mais NTC foi usada como matriz, obteve-se o aumento do limite de resistência à tração e ao impacto, confirmado por uma análise de variância com 95% de confiança, mostrando a eficácia no tratamento dos NTC. / This work has developed a procedure for incorporating carbon nanotubes (CNT) on a phenol / epoxy matrix to be used as a carbon fiber composite. Performing for such oxidation of the NTC with the use of microwaves and their functionalization with 3- aminopropyl-triethoxysilane, a coupling agent used between the resin and CNT. After processing, as a result of the addition of CNT, the resin obtained an increase in the glass transition temperature and an improvement in flexural strength and impact resistence. In the carbon fiber composite, hand lay-up prepared, where the phenol / epoxy and CNT was used as a matrix, we obtained the increase in the limit of tensile strength and impact resistance, confirmed by an analysis of variance with 95% confidence, showing efficacy in the treatment of CNT.
|
12 |
Design, synthesis, and properties of multifunctional lactose-containing polyurethanesDalton, Emily 23 August 2022 (has links)
No description available.
|
13 |
Towards DNA-Bodies : A Novel Polymer Structure for Biological RecognitionLövdahl, Paul January 2010 (has links)
There are different kinds of recognition molecules that specifically can detect and bind target molecules. Antibodies, with their two light and two heavy chains can detect and bind any kind of antigens. Molecular imprinting is a technology to prepare specific polymers that selectively bind target molecules. The technology has received wide attention in recent years because it provides a viable method for creating a polymer that is complementary in shape and binding sites to a template. The synthesized polymer is called a molecularly imprinted polymer (MIP) or a plastibody. Molecular imprinting shows promise in diverse areas as chromatography, antibody mimics, solid phase extraction and more. An alternative to molecular imprinting and other types of recognition has recently been postulated where DNA polymers based on functionalized polynucleotides build up a polymer network that are able to specifically recognize a target. This approach is characterized by binding of oligonucleotides carrying functional organic groups, to the target molecule followed by connecting the functionalized oligonucleotides forming a DNA polymer that specifically recognizes the target. The polymer is called a DNAbody. Thus, a DNAbody is a polymer structure based on DNA conjugated with functional organic groups which specifically can detect and bind to a template. The DNA-bodies can be copied and produced in larger amounts by PCR. This study showed that at least one functional oligonucleotide was able to interact with the target antibody. It was also seen that some interaction occurred between the DNA and protein. The results also indicated that it is possible to perfom DNA polymerase reactions in presence of an antibody.
|
14 |
Investigation on Graphene/poly(methyl methacrylate) nano-composite structures by Dissipative Particle DynamicsHuang, Guan-Jie 26 July 2012 (has links)
In this study, the nanocomposite of graphene and PMMA at the different volume fractions was investigated by molecular dynamics and dissipative particle dynamics simulations. The MD simulation can be performed to simulate the nanocomposite system at different weight fractions to obtain the different repulsive parameters. After obtaining the repulsive parameters, the DPD simulation can be utilized to study the equilibrium phase of graphene and PMMA nanocomposite. From our result, all equilibrium phases at different volume fractions are cluster. However, it is difficult to enhance the property for nanocomposite material due to the aggregated graphene (cluster). Hence, we change the interaction repulsive parameters to stand for the different degrees of functionalized graphene. When the interaction repulsive parameter is smaller than 80, the equilibrium phase is dispersion. In addition, the different number of functionalized garphene bead per graphene was studied, and results show that the equilibrium phase is dispersion when all graphene beads per graphene are functionalized.
|
15 |
Covalent Layer-by-Layer Synthesis of Responsive Porous FiltersAllen, Ainsley Larue 2011 May 1900 (has links)
Poly(N-isopropylacrylamide) (PNIPAM), a temperature responsive polymer, undergoes a phase change at a lower critical solution temperature (LCST) in aqueous solutions. For PNIPAM this temperature is 32 °C in water. Below the LCST, the polymer is readily solvated by water. As the temperature of the solution increases, the polymer undergoes a phase transition so that above the LCST it is no longer water soluble. The LCST of PNIPAM may be changed by the addition of salt solutions from the Hofmeister series which will follow the Hofmeister effect for salting-in and salting-out the polymer.
Temperature responsive polymers may be grafted to a surface in a variety of methods to create responsive thin films that exhibit a change in wettability. The surface wettability is directly related to the polymers ability to be solvated in its coil conformation. When PNIPAM is grafted to a surface, the surface becomes alternatively hydrophobic and hydrophilic in response to both temperature and the anions in the Hofmeister series which take the surface either above or below the LCST of PNIPAM.
The synthesis of responsive nanocomposite grafts was successfully applied to glass slides and three-dimensional surfaces, porous glass frits which were capable of controlling the passive flow rate. The nanocomposite graft was assembled in a covalent layer-by-layer approach to create more chemically robust surfaces, and also to incorporate nanoparticles into the graft for increased surface roughness and therefore improve wettability response. Because of a much greater inherent roughness to a glass frit, characterization of the polymers and nanoparticles was performed before they were covalently bound to the surface. The final product, a functionalized frit with a PNIPAM/SiO2 nanocomposite graft, was analyzed by observing changes in the passive permeation rate of the frit between water and salt solutions. These changes in flow were indicative of the surface bound PNIPAM changing between its hydrophilic and hydrophobic conformation in response to water and concentrations of kosmotropic salts such as sodium sulfate and sodium citrate. In addition to the solute response, the frit was also determined to be responsive to temperature and concentration. Water exhibited a passive flow rate 1000 times faster than a kosmotropic salt but had a similar flow rate to that a chaotropic salt. By measuring the flow rate of 0.5 M Na2SO4 at ~7 °C in a cold room and at room temperature it was observed that sodium sulfate in the cold room passed through the frit at a rate 100 times faster than at room temperature. Because of the hysteresis of PNIPAM documented in literature, washing procedures were kept consistent between experiments to achieve more reproducible results.
It was concluded that the frits were temperature responsive and had relative standard deviations below 25 percent for flow rates on a single frit. However, standard deviations of flow rates between frits were higher. This was likely due to a combination of factors, such as the frits’ pore size range of 10 μm resulting in the possibility of varied degrees of functionalization of each frit.
|
16 |
TETHERED POLYMERS: KINETICS AND CONTROLHuang, Heqing 01 January 2004 (has links)
This dissertation describes a study of the kinetics of formation of tethered polymer layers. Polymer chains diffuse from dilute solution to the surface a solid, to which they become attached by one end. Kinetics profiles composed of three distinct regimes are displayed by all tethering reactions studied in the absence of segmental adsorption, regardless of solvent quality, temperature, chemistry of polymer, architecture of polymer, and type of reactive site on the surface. The first regime, fast and predicted previously by theory, is controlled by diffusion of the polymer chains through solution to the bare surface. The second regime, slow and also predicted by theory, is controlled by diffusion of the polymer chains through the already tethered layer. The third regime, relatively fast and not predicted by theory, appears to be the consequence of cooperative interaction between incoming chains and tethered chains. During the tethering process, each tethered polymer chain changes from a random-coil-like configuration to a vertically stretched configuration. The end of the first regime corresponds to completion of a layer of nonoverlapping, coil-like tethered chains, called a mushroom layer. Cessation of tethering corresponds to a layer of vertically stretched chains, called a polymer brush. Transition from mushroom to brush mainly takes place in the third regime and develops in spatially nonuniform manner. The understanding gained about the kinetics of tethering was used to construct simply tethered layers, bi-component tethered layers, bidisperse (two molecular weights) tethered layers, and tethered layers of mixed architecture (linear and star-branched).
|
17 |
Synthesis and Complexation Studies of Novel Functionalized Crown Ethers and Azacrown EthersHuang, Zilin 05 1900 (has links)
Novel cage-functionalized azacrown ethers, i.e. 51, 52, 53, 55, 57, 61 and 62, which have various crown cavity and different number of nitrogen atoms incorporated, have been prepared. X-ray structures of 53, 55 and 57 have been obtained for the study of the crown topological structure. The complexation properties of crown 51, 52, 57, 61 and 62 have been evaluated via alkali metal picrate extraction, silver picrate extraction and ESI-MS study. The novel cage-fuctionalized azacrown ethers generally exhibit high avidity and selectivity towards Ag+ versus alkali metal ions and some transition metals i.e. Cu2+, Mn2+, Zn2+, Ni2+ and Pb2+. Crown 61 displays significant avidity and selectivity toward K+ in alkali metal picrate extraction experiments vis-à-vis the remaining alkali metal picrates. Three types of ditopic ion-exchange receptors for sodium hydroxide extraction study have been designed. All of the crown ether molecules have proper cavity for selective sodium complexation and have weakly acidic ionizable alcohols for sodium-proton exchange under strongly basic conditions. Crown 80 and 81 were synthesized; key intermediates for the synthesis of crown 82, 83 and 84 have been prepared. The preparation of 99 afforded an unexpected crown 103. The preparation of 109 had been attempted, but could not be successfully isolated. Four novel cage-functionalized calix[4]arene crown-5, i.e. 113-116, have been synthesized. The structures of 113 and 116 have been established by X-ray crystal structural analysis and NMR spectral analysis. The complexation properties of the four ionic receptors have been studied via alkali metal picrate extraction experiments. Crown 115 and 116 display more than modest avidity toward alkali metal ions and are most selective toward K+ vis-à-vis 113 and 114.
|
18 |
Funkcionalizace polypropylenu maleimidy / Functionalization of Polypropylene by MaleimidesKorčušková, Martina January 2020 (has links)
Diploma thesis deals with preparation of polypropylene functionalized by maleimides, based on the reaction between maleic anhydride and amine. The overview of functionalization of polypropylene by maleic anhydride by reactive extrusion and routes for the synthesis and utilization of maleimides are contained in the theoretical part. Samples of maleimide-functionalized polypropylene were prepared by reactive extrusion using low molecular weight amines (aniline and 4-aminophenol) and hight molecular weight polyether monoamines. Functionalized polypropylene samples were prepared by several methods differing in the composition of the reaction mixture and performing a grafting reaction. Appropriate maleamic acids and maleimides were synthesized from low molecular weight amines and further used to functionalize the polypropylene. To characterize the samples, the degree of monomer conversion and melt flow index were determined and further analyses were performed by Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. The synthesis of low molecular weight products was further monitored by thin layer chromatography and thermogravimetric analysis with evolved gas analysis.
|
19 |
Development of a Sensor System for Rapid Detection of Volatile Organic Compounds in Biomedical ApplicationsAngarita Rivera, Paula Andrea 12 1900 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / Volatile organic compounds (VOCs) are endogenous byproducts of metabolic pathways that can be altered by a disease or condition, leading to an associated and unique VOC profile or signature. Current methodologies for VOC detection include canines, gas chromatography-mass spectrometry (GC-MS), and electronic nose (eNose). Some of the challenges for canines and GC-MS are cost-effectiveness, extensive training, expensive instrumentation. On the other hand, a significant downfall of the eNose is low selectivity. This thesis proposes to design a breathalyzer using chemiresistive gas sensors that detects VOCs from human breath, and subsequently create an interface to process and deliver the results via Bluetooth Low Energy (BLE). Breath samples were collected from patients with hypoglycemia, COVID-19, and healthy controls for both. Samples were processed, analyzed using GC-MS, and probed through statistical analysis. A panel of 6 VOC biomarkers distinguished between hypoglycemia (HYPO) and Normal samples with a training AUC of 0.98 and a testing AUC of 0.93. For COVID-19, a panel of 3 VOC biomarkers distinguished between COVID-19 positive symptomatic (COVID-19) and healthy Control samples with a training area under the curve (AUC) of receiver operating characteristic (ROC) of 1.0 and cross-validation (CV) AUC of 0.99. The model was validated with COVID-19 Recovery samples. The discovery of these biomarkers enables the development of selective gas sensors to detect the VOCs.
Polyethylenimine-ether functionalized gold nanoparticle (PEI-EGNP) gas sensors were designed and fabricated in the lab and metal oxide (MOX) semiconductor gas sensors were obtained from Nanoz (Chip 1: SnO2 and Chip 2: WO3). These sensors were tested at different relative humidity (RH) levels and VOC concentrations. The contact angle which measures hydrophobicity was 84° and the thickness of the PEI-EGNP coating was 11 µ m. The PEI-EGNP sensor response at RH 85% had a signal 10x higher than at RH 0%. Optimization of the MOX sensor was performed by changing the heater voltage and concentration of VOCs. At RH 85% and heater voltage of 2500 mV, the performance of the sensors increased. Chip 2 had higher sensitivity towards VOCs especially for one of the VOC biomarkers identified for COVID-19. PCA distinguished VOC biomarkers of HYPO, COVID-19, and healthy human breath using the Nanoz. A sensor interface was created to integrate the PEI-EGNP sensors with the printed circuit board (PCB) and Bluno Nano to perform machine learning. The sensor interface can currently process and make decisions from the data whether the breath is HYPO (-) or Normal (+). This data is then sent via BLE to the Hypo Alert app to display the decision.
|
20 |
Synthesis and Characterization of Pendant-functionalized Polymers from Baylis-Hillman AdductsPeng, Chao 07 June 2013 (has links)
No description available.
|
Page generated in 0.0973 seconds