This diploma thesis deals with the design of a two-storey extension of a penzion house in Sebranice near Boskovice. The building is located on a flat terrain and is adjacent to the existing building of a country house. The building has a ballroom, new facilities for the existing building, wellness, garage, reception, meeting room, dining room and seven accommodation units for temporary accommodation for a maximum of 18 people. The vertical load-bearing structures are designed from a structural system of ceramic blocks of the HELUZ systém, the building are based on foundation strips. The ceilings and stairs are monolithic reinforced concrete. The roof is sloping, saddle, formed by a purlin system. The work contains project documentation for the construction.

This thesis focuses on the design of a multifunctional building in the village Nebovidy. The building will be used for sports, cultural events, entertainment and administrative activities. The building is located in close proximity to the municipal office. The building is divided into two buildings - rear hall with offices and a hall itself. Background has 3 floors and a partial basement. The structural system is a wall with a gable roof with dormers. Hall has a supporting structure made of steel and is partially sunk below ground level.

Master´s thesis solves the design of an object of restaurant and guesthouse in Libomyšl. The building has a rectangular shape with a additional building on the north side. The building has three floors. Above the house is designed backgrounds access service for flat roof duplex apartment located in the building. Roofing of the main part of the building is made by sloped saddleroof with ten skylights. Additional object is covered by a single layered flat roof.vered by a single layered flat roof.

Master´s thesis deals with the project documentation of the design of the new building hall of production. This hall is situated in Slapy at Tábor. Design and appendix´s were made by the present valid laws, goverment´s restrictions and standards. This object is placed in ground plot number 104/12, the land cadastre of Slapy at Tábor. The building object is designated for factory and storage area. Next to the building plot carry underground services. In the building object is factory hall and cloakroom for 2-4 employes. Director´s flat is in first floor. Building has two floors and floor plan 12,5 x 30,5 m on final grade. The carrying systém is from hollow building brick. The building has gable roof. Specialization is processed on „heating the building“ witch forms separate annex of Master´s thesis.

This diploma thesis deals with design of nursing home on plot in Říčky, Brno–country district. The house is without cellar and has two parts - apartment building and public building. Public building has two floors; apartment building has three floors. The vertical load-bearing structure consists mainly of Porotherm ceramic system, horizontal load-bearing structure consists of Spiroll panels. Both buildings are roofed with a gable roof.

The diploma thesis deals with the design of the holiday apartment house. The building with an irregular floor plan has four storeys and it is covered with a flat roof with vegetation in the level above 1.NP a gabled roof in a level above 4.NP. The apartment house offers ten separate apartment flats intended for temporary or permanent accommodation. It also includes a public area, including refreshments and relaxation zone with swimming pool.

Diploma thesis solves newly built pension in the village Jestřabí v Krkonoších - Křížlice. The pension is separately standing in a sloping terrain. It has a cuboid shape with gable roof, three aboveground floors and an underground floor with partial basement. The house is designed for accomodation of persons including families with children in the summer and winter season, with possibility of conferences and corporate training courses in off-season. As a part of pension there is a flat for its owner. Structural system is transversal, wall, technology of masonry. Horizontal load-bearing structures are combined. Gable roof is made by timber truss girders with metal roofing. Staircase is straight, two-arm with landing, monolithic. Foundation structures are shallow, foundation strips are monolithic, rectangular shaped, made from plain concrete.

The subject of the diploma thesis is the design of the construction of a multifunc-tional building of the municipal building in Předboj and the elaboration of the construction documentation. The proposed building is located near the existing village center. The building is designed on undeveloped land, which forms an im-aginary boundary between the existing buildings from the end of the 19th century and the beginning of the 20th century and the new buildings from the beginning of the 21st century. The architectural character suitably combines the character of the original development with gabled roofs with modern elements characterizing the new development. The building is divided into two wings. The east wing is one-storey and houses the premises of the municipal office. The west wing is mul-ti-storey. In the basement there are the technical facilities of the municipal office, on the first floor there are the library and the ceremonial hall. The attic is intended for the detached workplace of the basic art school.

The subject of the final thesis is the elaboration of design documentation for the new construction of an accommodation facility, specifically a boarding house intended for recreation. The new building is located in the cadastral area of ??the village Vernířovice. It is a building with three floors above ground and one underground floor. The building is based on foundation strips made of plain concrete and a foundation slab made of reinforced concrete. The vertical load-bearing structures are made of cley blocks and blocks of permanent formwork. Horizontal load-bearing structures are made of reinforced concrete. The roof structure is saddle with elongated dormers.

The aim of my thesis is to design new Guest house in Čeladná. First part is focused on building design and construction. Second part is focused on heating, ventilation and air conditioning (HVAC) design and renewable energy sources. Third part is focused on detailed solution of noise and vibration from the environment around building. Guest house is three – storey building but there is one more underground storey for technical facilities. Ground floor contains staff facilities, restaurant, entrance hall with stairs and office. On the second floor we can find four guest rooms with terrace and corridor. On the third floor we can find three guest rooms. Heating in the building is secured by gas condensing boilers. Ventilation is provided by two air condition units. Each guest room has radiators and cooling distribution units and ventilation. Cooling is secured by one cooling unit on the green roof. On the gable roof we can find 75 photovoltaic panels. Third part is focused on detailed solution of noise, vibration from the environment around building and spatial acoustics of guest room. The thesis is carried out in AutoCAD, Sketch up, Lumion and DEKSOFT software. All structures comply with the valid standards and regulation.