This diploma thesis deals with the analysis and description of high power laboratory CVVOZE. In the text we can find a description of the individual elements high power laboratory stating their parameters and their analysis from the perspective of impedance. The practical concern of this work is the creation of program for calculating the adjustment burdens and creating utilities helpful for operation and interpretation of laboratory function laity and technical employees.

This diploma thesis deals with distribution stress and strain of sheets metal of rotor packet and in critical locations of supporting bars of synchronous generator. These variants are calculated and one another comparison of analytic calculation results, numeric calculation of 2D model and numeric calculation of 3D model in three vriants ( with bars of rectangle section, circular section, with upper radius). The calculation include influence of thermal expansion, centrifugal force, interference of the packet on the shaft and prestress in the axial direction of bolt. To creation of geometric model and numerical calculation is used program ANSYS 11.

The aim of the project is to design a steam generator in which the sodium flows pipeline hand, and on the other hand, water flow and water vapor (H2O). The main idea of this thesis is to propose such a steam generator, to avoid or eliminate the possibility of adverse reactions of sodium with water and, if this phenomenon occurs, thus minimizing the damage caused by this reaction. The work contains information on the implementation of steam, steam option, the necessary calculations for the design and construction and evaluation.

Diploma thesis is trying to analyze crank mechanism of a gas V-sixteen engine. Kinematics and balance crank mechanism are analyzed, dynamic model parameters are dermined, natural frequency of the torsional system are calculated, coupling parameters are designed and torsional problem with attached electric generator is analyzed.

This Master´s thesis deals with the analysis of modal characteristics of the vertical synchronous generator. The goal of this work is to determine influence of individual parts of the generator on modal characteristics. Another part of this thesis contains analysis of different variants for storaging the generator and also structural modifications, which lead to the improvement of the modal properties. For modelation was used cumputional modeling in ANSYS.

Diploma thesis is focused on analisis of the steam generator tube bundle on the basis calculation by the finite elements method and softwaru ANSYS. Next it will also také account of job descriptions and methods of operation of the equipment propřed plan revision kontrol points that will be most critical. Annexes included documentary of model from the SolidWorks.

The thesis deals with the development of the web-based Helpdesk application which ensures and supports the communication with Internet users. The first section of the thesis contains a brief description of the individual means and tools used by the developer. The practical part describes the design and development of the individual layers of the web-based application concerned. The latter section also mentions the development and usage of the required synchronization and code generation tools.

The aim of this master’s thesis is the optimal design of swirl turbines for small water power plant. It is described a different possibilities of turbine‘s install for locality Vrchlabí. It presents a design of turbines and draft tubes. For the installation of turbines is computed theoretical production of annual electric energy. Furthermore it describes a design of supply channel and intake structure.

The thesis discusses an unconventional technology of wire-cut electro discharge machining. In the beginning there is a description of the basic principle, the fundamentals of electro discharge machining and its technological application. Further chapters characterise the wire-cut electro discharge machining, the wire electrodes used, the main parts of the machine, the cutting conditions and the advantages of this technology. The practical part is focused on the possibilities of the camera system during the production on a wire cutting machine and the comparison of nowaday´s machines in the manufacture of precise cutting tools in the middle-sized tool-room.

V informatice je pojem entropie obvykle znám jako nahodný proud dat.  Tato práce krátce shrnuje metody generovaní nahodných dat a popisuje generátor náhodnych čísel, jež je obsažen v jádře operačního systému Linux.  Dále se práce zabývá určením bitové rychlosti generování nahodných dat tímto generátorem ve virtualizovaném prosředí, které poskytují různé hypervizory.  Práce popíše problémy nízkého výkonu generátory nahodných dat ve virtualním prostředí a navrhne postup pro jejich řešení.  Poté je nastíňena implementace navržených postupů, které je podrobena testům a její vysledky jsou porovnány s původním systémem. Systém pro distribuci entropie může dále vylepšit množství entropie v sytémovém jádře o několik řádu, pokud je připojen k vykonému generátoru nahodných dat.