1 |
Reconstruction of Complete Head Models with Consistent ParameterizationNiloofar, Aghayan 16 April 2014 (has links)
This thesis introduces an efficient and robust approach for 3D reconstruction of complete head models with consistent parameterization and personalized shapes from several possible inputs. The system input consists of Cyberware laser-scanned data where we perform scanning task as well as publically available face data where (i) facial expression may or may not exist and (ii) only partial information of head may exist, for instance only front face part without back part of the head.
Our method starts with a surface reconstruction approach to either transfer point clouds to a mesh structure or to fill missing points on a triangular mesh. Then, it is followed by a registration process which unifies the representation of all meshes. Afterward, a photo-cloning method is used to extract an adequate set of features in a semi-automatic way on snapshots taken from front and left views of provided range data. We modify Radial Basis Functions (RBFs) deformation so that it would be based on not only distance, but also regional information. Using feature point sets and modified RBFs deformation, a generic mesh can be manipulated in a way that closed eyes and mouth movements like separating upper lip and lower lip can be properly handled. In other word, such mesh modification method makes construction of various facial expressions possible. Moreover, new functions are added where a generic model can be manipulated based on feature point sets to consequently recover missing parts such as ears, back of the head and neck in the input face. After feature-based deformation using modified radial basis functions, a fine mesh modification method based on model points follows to extract the fine details from the available range data. Then, some post refinement procedures employing RBFs deformation and averaging neighboring points are carried out to make the surface of reconstructed 3D head smoother and uniform. Due to existence of flaws and defects on the mesh surface such as flipped triangles, self-intersections or degenerate faces, an automatic repairing approach is leveraged to clean up the entire surface of the mesh. The experiments which are performed on various models show that our method is robust and efficient in terms of accurate full head reconstruction from input data and execution time, respectively. In our method, it is also aimed to use minimum user interaction as much as possible.
|
2 |
Reconstruction of Complete Head Models with Consistent ParameterizationNiloofar, Aghayan January 2014 (has links)
This thesis introduces an efficient and robust approach for 3D reconstruction of complete head models with consistent parameterization and personalized shapes from several possible inputs. The system input consists of Cyberware laser-scanned data where we perform scanning task as well as publically available face data where (i) facial expression may or may not exist and (ii) only partial information of head may exist, for instance only front face part without back part of the head.
Our method starts with a surface reconstruction approach to either transfer point clouds to a mesh structure or to fill missing points on a triangular mesh. Then, it is followed by a registration process which unifies the representation of all meshes. Afterward, a photo-cloning method is used to extract an adequate set of features in a semi-automatic way on snapshots taken from front and left views of provided range data. We modify Radial Basis Functions (RBFs) deformation so that it would be based on not only distance, but also regional information. Using feature point sets and modified RBFs deformation, a generic mesh can be manipulated in a way that closed eyes and mouth movements like separating upper lip and lower lip can be properly handled. In other word, such mesh modification method makes construction of various facial expressions possible. Moreover, new functions are added where a generic model can be manipulated based on feature point sets to consequently recover missing parts such as ears, back of the head and neck in the input face. After feature-based deformation using modified radial basis functions, a fine mesh modification method based on model points follows to extract the fine details from the available range data. Then, some post refinement procedures employing RBFs deformation and averaging neighboring points are carried out to make the surface of reconstructed 3D head smoother and uniform. Due to existence of flaws and defects on the mesh surface such as flipped triangles, self-intersections or degenerate faces, an automatic repairing approach is leveraged to clean up the entire surface of the mesh. The experiments which are performed on various models show that our method is robust and efficient in terms of accurate full head reconstruction from input data and execution time, respectively. In our method, it is also aimed to use minimum user interaction as much as possible.
|
3 |
Whether Generic Model Works for Rapid ERP-based BCI CalibrationJin, Jing, Sellers, Eric W., Zhang, Yu, Daly, Ian, Wang, Xingyu, Cichocki, Andrzej 01 January 2013 (has links)
Event-related potential (ERP)-based brain-computer interfacing (BCI) is an effective method of basic communication. However, collecting calibration data, and classifier training, detracts from the amount of time allocated for online communication. Decreasing calibration time can reduce preparation time thereby allowing for additional online use, potentially lower fatigue, and improved performance. Previous studies, using generic online training models which avoid offline calibration, afford more time for online spelling. Such studies have not examined the direct effects of the model on individual performance, and the training sequence exceeded the time reported here.The first goal of this work is to survey whether one generic model works for all subjects and the second goal is to show the performance of a generic model using an online training strategy when participants could use the generic model. The generic model was derived from 10 participant's data. An additional 11 participants were recruited for the current study. Seven of the participants were able to use the generic model during online training. Moreover, the generic model performed as well as models obtained from participant specific offline data with a mean training time of less than 2. min. However, four of the participants could not use this generic model, which shows that one generic mode is not generic for all subjects. More research on ERPs of subjects with different characteristics should be done, which would be helpful to build generic models for subject groups. This result shows a potential valuable direction for improving the BCI system.
|
4 |
Whether Generic Model Works for Rapid ERP-based BCI CalibrationJin, Jing, Sellers, Eric W., Zhang, Yu, Daly, Ian, Wang, Xingyu, Cichocki, Andrzej 01 January 2013 (has links)
Event-related potential (ERP)-based brain-computer interfacing (BCI) is an effective method of basic communication. However, collecting calibration data, and classifier training, detracts from the amount of time allocated for online communication. Decreasing calibration time can reduce preparation time thereby allowing for additional online use, potentially lower fatigue, and improved performance. Previous studies, using generic online training models which avoid offline calibration, afford more time for online spelling. Such studies have not examined the direct effects of the model on individual performance, and the training sequence exceeded the time reported here.The first goal of this work is to survey whether one generic model works for all subjects and the second goal is to show the performance of a generic model using an online training strategy when participants could use the generic model. The generic model was derived from 10 participant's data. An additional 11 participants were recruited for the current study. Seven of the participants were able to use the generic model during online training. Moreover, the generic model performed as well as models obtained from participant specific offline data with a mean training time of less than 2. min. However, four of the participants could not use this generic model, which shows that one generic mode is not generic for all subjects. More research on ERPs of subjects with different characteristics should be done, which would be helpful to build generic models for subject groups. This result shows a potential valuable direction for improving the BCI system.
|
5 |
Control of milk pasteurization process using model predictive approachNiamsuwan, S., Kittisupakorn, P., Mujtaba, Iqbal M. 31 January 2014 (has links)
Yes / A milk pasteurization process, a nonlinear process and multivariable interacting system, is difficult to control by the conventional on-off controllers since the on-off controller can handled the temperature profiles for milk and water oscillating over the plant requirements. The multi-variable control approach with model predictive control (MPC) is proposed in this study. The proposed algorithm was tested for control of a milk pasteurization process in three cases of simulation such as set point tracking, model mismatch, difference control and prediction horizons, and time sample. The results for the proposed algorithm show the well performance in keeping both the milk and water temperatures at the desired set points without any oscillation and overshoot and giving less drastic control action compared to the cascade generic model control (GMC) strategy.
|
6 |
The Comprehensive Digital Forensic Investigation Process Model (CDFIPM) for digital forensic practiceMontasari, Reza January 2016 (has links)
No description available.
|
7 |
Dynamic Modeling and Simulation of Digital Displacement MachineChakraborty, Sanjib January 2012 (has links)
Improved efficiency, better controllability and low noise are the most demanding features form a displacement machine now-a-days. Most of the conventional displacement machines are basically a reciprocating pumping element controlled by valve plates or with the help of check valve [1]. This kind of hydraulic machines loose efficiency dramatically at partial displacement because all of the pistons remain at high pressure at the cycle time and due to pressure inside the piston leakage and shear losses increases. One approach to improve the efficiency of the displacement machine can be controlling each hydraulic piston by using programmable faster valves called digital valve. As the total displacement will be controlled digitally, the total system is called Digital Displacement Technology. In digital displacement machine it is possible to disconnect some of the pistons from the load and the piston will connect only with the low pressure side, minimizing losses due to leakage and shear. As the valve will control directly with digital controller it will eliminate the necessity of servo-hydraulic control required by conventional systems. Digital valves can open fully and close again with the input signal within one revaluation of the shaft, so it gives better control to the pumping element results reduction in hysteresis and increase the linearity of the pumping element. In Digital Displacement machines by controlling the valves pistons are connected with the machine when pressure is equal, but in the traditional machines piston connection was pre-determined with the shaft angle. By doing the piston control efficiency of the machine will improve and the sound generates for the decompression flow will be reduced [17]. Also energy storage and recovery can be possible by using accumulator.
|
8 |
ROBUST GENERIC MODEL CONTROL FOR PARAMETER INTERVAL SYSTEMSIstre, Joseph Michael 01 January 2004 (has links)
A multivariable control technique is proposed for a type of nonlinear system with parameter intervals. The control is based upon the feedback linearization scheme called Generic Model Control, and alters the control calculation by utilizing parameter intervals, employing an adaptive step, averaging control predictions, and applying an interval problem solution. The proposed approach is applied in controlling both a linear and a nonlinear arc welding system as well in other simulations of scalar and multivariable systems.
|
9 |
Predictive Control Strategy for Temperature Control for Milk Pasteurization ProcessNiamsuwan, S., Kittisupakorn, P., Mujtaba, Iqbal M. January 2013 (has links)
no / A milk pasteurization process is a nonlinear process and multivariable interacting system. This makes it difficultly to control by the conventional on-off controllers. Even if the on-off controller can managed the milk temperatures in the holding tube and the cooling stage of the plate pasteurizer according to the plant's requirements, the dynamic profiles of the milk temperature are oscillating around a desired value. Consequently, this work is aimed at improving the control performance by a multi-variables control approach with model predictive control (MPC). The proposed algorithm was tested in the case of set point tracking under nominal condition gathered by the real observation. To compare the performance of the MPC controller, a model-based control approach of generic model control (GMC) coupled with cascade control strategy is taken into account. The simulation results demonstrated that a proposed control algorithm performed well in keeping both the milk and water temperatures at the desired set points without any oscillation and overshoot. Because of the predictive control strategy, the control response for MPC was less drastic control action compared to the GMC.
|
10 |
Comportement vibratoire de structures composites intégrant des éléments amortissants / Vibro-acoustocal behavior of composite structures with damping elementsCastel, Alexis 21 November 2013 (has links)
Ce travail traite de la modélisation de structures composites intégrant des éléments amortissants passifs. Un modèle de plaque "équivalent simple couche" générique utilisant des fonctions de description du cisaillement transverse est présenté. Plusieurs méthodes d'obtention de ces fonctions sont décrites, permettant de retrouver des modèles classiques ou issus de la littérature. Deux nouvelles méthodes d'obtention de ces fonctions sont aussi présentées.Plusieurs méthodes de discrétisation adaptées au modèle générique sont étudiées. La méthode de Navier permet de tester la qualité de chaque modèle associé à un jeu de fonctions de description du cisaillement transverse. La méthode de Rayleigh-Ritz permet l'étude du comportement vibratoire d'une plaque rectangulaire munie d'un ou plusieurs patchs viscocontraints. Plusieurs éléments finis issus de la littérature, adaptés au modèle, sont aussi présentés.À l'aide de la méthode de Navier, une étude numérique du comportement statique et dynamique de plusieurs configurations de plaques permet la comparaison des différents modèles présentés. La méthode de Rayleigh-Ritz est utilisée pour étudier le comportement vibratoire d'une plaque munie d'un patch viscocontraint. Une comparaison des résultats obtenus avec le modèle présenté et ceux issus de calculs éléments finis tridimensionnels permet de valider notre modèle. Une étude énergétique de la plaque patchée permet d'illustrer le comportement du patch. Enfin une méthode inverse d'identification des matériaux viscoélastiques, basées sur une combinaison du modèle décrit et d'un algorithme génétique, montre une application du modèle. / This work is on the subject of modelization of structures treated with passive damping elements. A generic "equivalent single layer" plate model using transverse shear warping functions is presented. Several methods to obtain these functions are described, allowing the implementation of classical models and others issued from the litterature. Two new methods for obtaining these functions are also presented.Several discretization methods adapted to the generic plate model are studied. Navier's procedure allows the testing of the quality of each model associated with a set of transverse shear warping functions. Rayleigh-Ritz method allows the study of the vibrational behavior of a rectangular plate treated with one or several constrained damping patches. Several finite elements issued from the literature are also presented.Using Navier's procedure, a numerical study of the static and dynamic behavior of several plate configurations allows the comparison of the different plate models. Rayleigh-Ritz method is used to study the vibrational response of a plate treated with a constrained damping patch. A comparison of the results with those obtained with three dimensional finite element calculations permits the model validation. An energetic study of the patched plate allow us to understand the constrainted damping patch behavior. Finally, an inverse method, allowing the identification of the properties of viscoelastic materials, based on a combination of the presented model and a genetic algorithm, shows a possible application of the model.
|
Page generated in 0.057 seconds