The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.

The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.

The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.