Shock wave interactions such as those that occur during atmospheric re-entry, can produce extreme thermal loads on aerospace structures. These interactions are reproduced experimentally in hypersonic wind tunnels to study how the flow structures relate to the deleterious heat fluxes. In these studies, localized fluid jets created by shock interactions impinge on a test cylinder, where the temperature due to the heat flux is measured. These measurements are used to estimate the heat flux on the surface as a result of the shock interactions. The nature of the incident flux usually involves dynamic transients and severe nonuniformities. Finding this boundary flux from discrete unsteady temperature measurements is characterized by instabilities in the solution. The purpose of this work is to evaluate existing methodologies for the determination of the unsteady heat flux and to introduce a new approach based on an inverse technique. The performance of these methods was measured first in terms of accuracy and their ability to handle inherently ``unstable'' or highly dynamic data such as step fluxes and high frequency oscillating fluxes. Then the method was expanded to estimate unsteady and nonuniform heat fluxes. The inverse methods proved to be the most accurate and stable of the methods examined, with the proposed method being preferable. / Ph. D.

No description available.

by Tong Kwok Wang. / Parallel title in Chinese characters. / Thesis (M.Phil.)--Chinese University of Hong Kong, 1990. / Bibliography: leaves 71-74. / Acknowledgement / Abstract / Chapter 1. --- Introduction / Chapter 1.1 --- General Introduction --- p.1 / Chapter 1.2 --- Properties --- p.5 / Chapter 1.3 --- Background of this research --- p.10 / Chapter 1.4 --- The Present Experiment --- p.11 / Chapter 2. --- Theory / Chapter 2.1 --- Conduction Mechanism --- p.15 / Chapter 2.2 --- Temperature Dependence of Thermal Conductivity --- p.16 / Chapter 2.3 --- Phonon Conductivity and phonon mean free path --- p.20 / Chapter 3. --- Experimental / Chapter 3.1 --- Thermal Diffusivity by Laser Photothermal Radiometry --- p.22 / Chapter 3.2 --- Resistivity Measurement --- p.30 / Chapter 3.3 --- Sample Preparation --- p.36 / Chapter 3.4 --- Data Analysis --- p.37 / Chapter 4. --- Results and Discussion / Chapter 4.1 --- Thermal Conductivity --- p.41 / Chapter 4.2 --- Electronic Thermal Conductivity --- p.47 / Chapter 4.3 --- Phonon Thermal Conductivity --- p.52 / Chapter 4.4 --- Phonon Mean Free Path --- p.58 / Chapter 5. --- Conclusion and Suggestions for Further Work --- p.68 / References --- p.71 / Appendixes --- p.75

Thesis. 1976. M.S.--Massachusetts Institute of Technology. Dept. of Mechanical Engineering. / Microfiche copy available in Archives and Engineering. / Includes bibliographical references. / M.S.

A steady state, axial flow thermal conductivity test apparatus was designed and constructed to operate between room temperature and approximately 4 Kelvin, and to be compatible with existing electronic instrumentation and a continuous flow cryostat. The test design included a radiation shield that had its temperature profile matched to that of the sample to minimize radiation heat transfer losses. The cryostat was used to provide the controllable, low temperature test environment in which the test apparatus would operate. A special wiring bundle was constructed to ensure proper connection of the test device to the required electronic instrumentation, which was controlled from a computer by custom written software. Once assembled, the thermal conductivity of a high purity copper sample was measured over the temperature range from 45 to 300 Kelvin and compared to literature recommended values. The test was performed a second time to check repeatability of the measurements over a range of temperature. Next, the thermal conductivity of a high purity niobium sample was measured and compared to literature recommended values. This test was also performed twice. When completed, these tests had demonstrated the accuracy and repeatability of the measurement of thermal conductivity by the test apparatus over the range of temperatures specified and over a range of conductivities. Finally, the thermal conductivity of a sample of the bulk metallic glass Vitreloy 1 was measured over the same temperature range. As far as was known, this was the first time the thermal conductivity of this particular material had been tested below 400 Kelvin. / Graduation date: 2003

Steel is the mother of industry, and is also an energy consumption intensive industry. Since the energy crisis, the various countries iron and steel plants positively take each energy frugal measure in order to reduce the fuel and the electric power consumption. In the iron and steel plant comparatively consumes the energy the system regulation equipment is the reheating furnace, so to save energy in a reheating furnace and reduce the energy consumption become one of important topics. The reduction consumes energy the countermeasure aspect may by analyze the heat transfer model and the change reheating furnace characteristic begins. In this thesis, we will build a simulation system of reheating furnace to analysis the temperature change of slab in a reheating furnace and discussion energy consumption factor. And then we use the thermal balance model to analysis the situation of fuel consumption. According to different conditions, we want to discuss the relationships energy consumption and increasing temperature of slab inside furnace.

Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2010. / Committee Chair: Zhang, Zhuomin; Committee Member: Kumar, Satish; Committee Member: Peterson, G. P. Part of the SMARTech Electronic Thesis and Dissertation Collection.

No description available.

No description available.

No description available.