41 |
Investigation of Subsonic and Supersonic Flow Characteristics of an Inductively Coupled Plasma FacilitySmith, Silas 19 September 2013 (has links)
Inductively Coupled Plasma (ICP) facilities create high enthalpy ows to recreate atmospheric entry conditions. Although no condition has been duplicated exactly in a ground test facility, it is important to characterize the condition to understand how close a facility can come to doing so. An ICP facility was constructed at the University of Vermont for aerospace material testing in 2010. The current setup can operate using air, carbon dioxide, nitrogen, and argon to test samples in a chamber. In this work we investigate di erent ways to increase measured heat ux and expand our facility to operate supersonically. To do so, a water cooled injection system was designed to overcome failure points of the prior system. An investigation of heat ux methods that provide a baseline for the facility were also examined and tested. A nozzle con guration was also developed with an overall goal of increasing the plasma ow to reach sonic and supersonic velocities, allowing it to be compared with the existing subsonic system. An iterative approach was taken to develop a nozzle design that is robust enough to handle the harsh environment, yet adaptable to the pre-existing facility components. The current design uses interchangeable sonic and supersonic nozzles which also allow for appropriate plasma gas expansion. Data are taken through retractable and goose-neck probe sample holders during testing. Heat ux can be determined by use of a Gardon gage, slug calorimeter, and water cooled calorimeter. Total and static pressure are determined from a pitot tube and pressure tap, which are then manipulated into a velocity measurement. A comparison between subsonic and supersonic operation is then made with these data. Existing literature uses correlations between jet diameter and velocity gradients to determine the e ective heat ux. This investigation found that the experimental and theoretical heat ux results scale correctly according to the correlations.
|
42 |
The Role of Stratosphere-Troposphere Planetary Wave Coupling in Driving Variability of the North Atlantic CirculationDunn-Sigouin, Etienne January 2018 (has links)
The wintertime North-Atlantic exhibits enhanced circulation variability relative to other areas of the globe and is a key determinant of weather and climate in the highly populated regions of Europe and Eastern North America. Previous work has linked extreme stratospheric polar vortex and planetary wave heat flux events with variability of the North-Atlantic circulation. To elucidate the role of the stratosphere in driving variability of the North-Atlantic circulation, the goal of this thesis is to clarify the relationship between extreme planetary wave heat flux and vortex events and understand the dynamical mechanisms driving extreme stratospheric planetary wave heat flux events using an idealized model.
The relationship between extreme stratospheric planetary wave heat flux and polar vortex events is clarified by comparing and contrasting their composite lifecycles using reanalysis data. Extreme negative heat flux events, defined as those less than the 5th percentile of the wintertime wave-1 distribution, involve stratospheric EP-flux divergence producing an acceleration of the vortex whereas extreme positive heat flux events, defined as those greater than the 95th percentile, involve stratospheric EP-flux convergence producing a deceleration of the vortex. Similar but smaller magnitude heat flux (22th and 78th percentile) events contribute to the development of longer-timescale vortex events. Negative heat flux events precede strong vortex events, showing that strong vortex events are true dynamical events involving wave-mean flow interaction. Conversely, positive heat flux events precede weak vortex events. The tropospheric jet shifts in the North-Atlantic that occur almost simultaneously with extreme stratospheric heat flux events are shown to be comparable if not larger than those that follow extreme vortex events for several weeks.
Next, a dry-dynamical core model is configured to capture the lifecycle of extreme positive and negative heat flux events seen in reanalysis. The events are not captured using the standard model setup with idealized wave-1 topography. A modified control simulation captures the key ingredients of the events: 1) the extremes of the stratospheric eddy heat flux distribution, 2) the cross-spectral correlation and phase between the stratosphere and troposphere, 3) the evolution of the eddy heat flux and EP-flux divergence, 4) the stratospheric evolution of the zonal-mean flow, including the NAM, NAM time-tendency, potential temperature time-tendency and stratospheric wave geometry, and 5) the tropospheric evolution, including the high-latitude wave-1 geopotential height pattern and mid-latitude jet shift. Comparison between the model and reanalysis reveals that higher-order planetary wavenumbers play a role prior to the events.
Finally, the dry-dynamical core model is used to examine the large-scale dynamical mechanisms driving extreme stratospheric negative heat flux events and their coupling with the tropospheric circulation. An ensemble spectral nudging methodology is used to isolate the role of: 1) the tropospheric wave-1 precursor, 2) the stratospheric zonal-mean flow and 3) the higher-order wavenumbers. The events are partially reproduced when nudging the wave-1 precursor and the zonal-mean flow whereas they are not reproduced when nudging either separately. In contrast, nudging the wave-1 precursor and the higher-order waves reproduces the events, including the evolution of the zonal-mean flow. Mechanism denial experiments show that the higher-order planetary wavenumbers drive the events by modifying the zonal-mean flow and through wave-wave interaction. Nudging all tropospheric wave precursors confirms they are the source of the stratospheric waves. Nudging all stratospheric waves reproduces the coupling with the tropospheric circulation. Taken together, the experiments show that extreme stratospheric negative heat flux events are consistent with downward wave coupling from the stratosphere to the troposphere.
|
43 |
Atomic Layer Thermopile Film for Heat Flux Measurement in High Speed and High Temperature FlowsLakshya Bhatnagar (5930546) 03 January 2019 (has links)
This work seeks to apply the novel heat flux sensor called as the Atomic Layer Thermopile to measure high frequency heat flux in high speed and high temperature flows found in Gas Turbine combustors. To achieve this the sensor must be able to survive the harsh environment of high temperature and high pressure. To have any confidence in our measurement, it is also imperative that there are tools available for precise estimation of the measurement uncertainty. This works strives to achieve these objectives by developing calibration techniques for uncertainty estimation using both exposure to radiation and in convective environments by calibrating against power input in steady state flow and transient heat flux calculated using wall temperature measurement. The response of the sensor is then investigated in high speed flows by measuring the heat flux inside a supersonic nozzle when exposed to shock waves. The shock waves are generated using a fast throttle valve located at the entrance of the supersonic nozzle by generating sudden rise in pressure. Lastly a numerical study is carried out to design a cooling system that will allow the sensor to survive in high temperature conditions of 1000°C while the sensor film is maintained at 50°C. A one-dimensional model is used to provide initial design parameters and then a two-dimensional axisymmetric conjugate CFD analysis is carried out to obtain the desired geometry that can meet the design conditions. A static structural analysis is also carried out on this geometry to ensure that it will be able to survive and avoid distortion under the operational pressure required for providing the desired coolant mass flow.
|
44 |
Effect of heat flux on wind flow and pollutant dispersion in an urban street canyonCheung, Ching, January 2006 (has links)
Thesis (M. Phil.)--University of Hong Kong, 2006. / Title proper from title frame. Also available in printed format.
|
45 |
Critical heat flux estimation for annular channel geometryPagh, Richard T. 26 April 2001 (has links)
Critical Heat Flux (CHF) is an important safety parameter for the design of nuclear
reactors. The most commonly used predictive tool for determination of CHF is a look-up
table developed using tube data with an average hydraulic test diameter of 8 mm. There
exist in the world today nuclear reactors whose geometry is annular, not tubular, and
whose hydraulic diameter is significantly smaller than 8 mm. In addition, any sub-channel
thermal hydraulic model of fuel assemblies is annular and not tubular.
Comparisons were made between this predictive tool and annular correlations developed
from test data. These comparisons showed the look-up table over-predicts the CHF
values for annular channels, thus questioning its ability to perform correct safety
evaluations.
Since no better tool exists to predict CHF for annular geometry, an effort was
undertaken to produce one. A database of open literature annular CHF values was
created as a basis for this new tool. By compiling information from eighteen sources and
requiring that the data be inner wall, unilaterally, uniformly heated with no spacers or
heat transfer enhancement devices, a database of 1630 experimental values was
produced.
After a review of the data in the database, a new look-up table was created. A look-up
table provides localized control of the prediction to overcome sparseness of data.
Using Shepard's Method as the extrapolation technique, a regular mesh look-up table was
produced using four main variables: pressure, quality, mass flux, and hydraulic diameter.
The root mean square error of this look-up table was found to be 0.8267. However, by
fixing the hydraulic diameter locations to the database values, the root mean square error
was further reduced to 0.2816. This look-up table can now predict CHF values for
annular channels over a wide range of fluid conditions. / Graduation date: 2001
|
46 |
Considerations on optimum design of micro heat pipe sinks using water as working fluidSimionescu, Florentina, January 2006 (has links) (PDF)
Dissertation (Ph.D.)--Auburn University, 2006. / Abstract. Vita. Includes bibliographic references.
|
47 |
Thermal hydraulic analysis of the Oregon State TRIGA Reactor using RELAP5-3D /Marcum, Wade R. January 1900 (has links)
Thesis (M.S.)--Oregon State University, 2008. / Printout. Includes bibliographical references (leaves 77-83). Also available on the World Wide Web.
|
48 |
The cooling of a hot steel plate by an impinging water jetZhao, Yongjun. January 2005 (has links)
Thesis (Ph.D.)--University of Wollongong, 2005. / Typescript. Includes bibliographical references: leaf 153-164.
|
49 |
Mechanistic modeling of evaporating thin liquid film instability on a bwr fuel rod with parallel and cross vapor flowHu, Chih-Chieh. January 2009 (has links)
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Abdel-Khalik, Said; Committee Member: Ammar, Mostafa H.; Committee Member: Ghiaasiaan, S. Mostafa; Committee Member: Hertel, Nolan E.; Committee Member: Liu, Yingjie.
|
50 |
Unsteady surface heat flux and temperature measurements /Baker, Karen Irene, January 1993 (has links)
Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1993. / Vita. Abstract. Includes bibliographical references (leaves 66-69). Also available via the Internet.
|
Page generated in 0.0389 seconds