No description available.

No description available.

No description available.

No description available.

The shortage of natural resources calls for energy conservation and the changing structure of modern science and technology makes possible the efficient dynamic energy modelling. This thesis presents a general review of existing techniques in the field of building and plant system energy modelling and concentrates on the establishment of a generalised modelling tool - the control volume conservation state space approach - to cope with the developing modern technology. The theoretical basis of this approach is discussed and verified in detail and applications demonstrated to the modelling of HVAC systems and equipment. Using this approach, any component of an HVAC system can be modelled at different levels and the qualities of the model are fully supported by the theoretical background of this approach. A computer programme for heating system simulation has been developed for the purpose of model validation and the validation efforts have been involved in the international cooperated programme of IEA Annex 10 exercises. As a part of group research, the work presented in this thesis has been involved in the development of advanced energy modelling techniques and methodology which has taken place at the ABACUS unit.

The work presented in this thesis will explore the development of novel heat recovery systems coupled with low carbon technologies, and its integration to become one device with multifunction (building integrated heat recovery/cooling/air dehumidifier. In the first part of this thesis, an experimental performance of an individual heat recovery unit using Micro Heat and Mass Cycle Core (MHM3C) made of fibre papers with cross flow arrangement has been carried out. The unit was tested in an environmental control chamber to investigate the effects of various parameters on the performance of heat/energy recovery unit. The results showed that as the airflow rate and temperature change increase, the efficiency decreases whilst recovered energy increases. Integrating heat recovery system in energy-efficient system represents significant progress for building applications. As part of the research, the integration of heat recovery using a cross-flow fixed-plate with wind-catcher and cellulose fibre papers of evaporative cooling units have allowed part of the energy to be recovered with the efficiency of heat recovery unit ranged from 50 to 70%, cooling efficiency ranged from 31 to 54%. In another case, the integration of heat recovery system with building part so called building integrated heat recovery (BIHR) was explored using polycarbonate plate with counter-flow arrangement. It introduces a new approach to MVHR system, an established technology that uses a modified insulation panel, linking the inside and outside of a building, to recover heat while extracting waste air and supplying fresh air. In this configuration it is not only acts a heat recovery, but also as a contribution to building thermal insulation. From the experiments conducted, it was found that through an energy balance on the structure, the efficiency of BIHR prototype was found to be 50 to 61.1 % depending on the airflow rate. This efficiency increases to the highest value of 83.3% in a full-scale measurement on a real building in Ashford, Kent as the area of heat transfer surface increases. The increasing of heat surface area again proved a better performance in terms of efficiency as the results on another full scale measurement on a real house in Hastings, Sussex showed to be 86.2 to 91.7%. With the aiming to have a high performance system, a new improvement design of BIHR' corrugated polycarbonate channels with four airstreams has significant advantages over the previous prototype BIHR with two airstreams. The recovered heat is increased by more than 50%. With the issue of thermal comfort in hot region area and problems with conventional air conditioning system, a study of BIHR system with fibre wick structure for different hot (summer) air conditions using different working fluids was carried out. For the first case, water was used to give a direct evaporative cooling effect which is suitable to evaluate the system performance under hot and dry climatic conditions and the second case, potassium formate (HCOOK) solution was used as liquid desiccant for dehumidification under hot and humid climate conditions. By supplying the water over the fibre wick structure, with a constant airflow rate of 0.0157m3/s, the efficiency increased with increasing intake air temperature. The efficiency ranged from 20 to 42.4% corresponding to the minimum and maximum of intake air temperature of 25°C and 38.2°C, respectively. With the variation of airflow rate, the efficiency of the system was found to be 53.2 to 60%. In second case, the HCOOK solution with concentration of 68.6% has been selected as the desiccant and for a defined airflow rate of 0.0157m3/s, heat recovery efficiency of about 54%, a lower desiccant temperature of 20°C, with higher intake air temperature and relative humidity produces a better dehumidification performance with a good moisture absorption capacity. Therefore, this system is expected to be used efficiently in hot and humid regions. The research is novel in the following ways: • The development of multifunction device in one system; building integrated, heat recovery, cooling, desiccant dehumidification. • The design and development of BIHR is an advanced technology of building thermal insulation and heat recovery. The novel BIHR -fibre wick cooling/dehumidification system has the potential to compete with conventional air conditioning systems under conditions involving high temperature and high moisture load.

The aim of this thesis is to study the energy performance of a building integrated heating and cooling system. The research objectives are to investigate the system operating characters, to develop mathematical models for the heating and cooling systems, to demonstrate the technologies experimentally, to identify the best designs for a combined system and to investigate the cost effectiveness of the system. The main components of the systems are the aluminium plate façade and the building wall behind it, these form a plenum between them and the air is then heated or cooled as it flows through this plenum. Mathematical models were developed based on the energy balance equations and solved by matrix inversion method. These models were then validated with experimental results. The experiments were carried out in the laboratory with a facade area of 2m2. Two designs of facade were tested, i.e. flat and transpired plates. Results showed that the transpired design gave better thermal performance; the system efficiency for the flat plate was only about 30%, whereas it was about 85% for the transpired plate. On the other hand, a cooling system with double plenums was found to be better than a single plenum. Thus, a transpired plate with two plenums was identified as the best design for space heating and cooling. The cooling efficiency was nearly 2.0 even at low solar radiation intensity. A simulation study was carried out by assuming a 40m2 of façade was installed on an office building in London. The yearly energy saving was estimated as 10,877kWh, which is equivalent to 5,874kgCO2/year of emission avoidance. The system is calculated to cost about £70/m2, and for a discount rate of 5% and 30 years of lifetime, the payback period for this system would be less than a years.

The global air temperature has increased by 0.74± 0.18 °C since 1905 and scientists have shown that CO2 accounts for 55 percentages of the greenhouse gases. Global atmospheric CO2 has been sharply increased since 1751, however the trend has slowed down in last fifty years in the Western Europe. UK and EU countries have singed the Kyoto agreement to reduce their greenhouse gas emissions by a collective average of 12.5% below their 1990 levels by 2020. In the EU, 40% of CO2 emission comes from the residential energy consumption, in which the HVAC system accounts for 50%, lighting accounts for 15% and appliances 10%. Hence, reducing the fossil-fuel consumption in residential energy by utilizing renewable energy is an effective method to achieve the Kyoto target. However, in the UK renewable energy only accounts for 2% of the total energy consumption in 2005. A novel heat recovery/desiccant cooling system is driven by the solar collector and cooling tower to achieve low energy cooling with low CO2 emission. This system is novel in the following ways: • Uses cheap fibre materials as the air-to-air heat exchanger, dehumidifier and regenerator core • Heat/mass fibre exchanger saves both sensible and latent heat from the exhaust air • The dehumidifier core with hexagonal surface could be integrated with windcowls/catchers draught • Utilises low electrical energy and therefore low CO2 is released to the environment The cooling system consists of three main parts: heat/mass transfer exchanger, desiccant dehumidifier and regenerator. The fibre exchanger, dehumidifier and regenerator cores are the key parts of the technology. Owing to its proper pore size and porosity, fibre is selected out as the exchanger membrane to execute the heat/mass transfer process. Although the fibre is soft and difficult to keep the shape for long term running, its low price makes its frequent replacement feasible, which can counteract its disadvantages. A counter-flow air-to-air heat /mass exchanger was investigated and simulation and experimental results indicated that the fibre membranes soaked by desiccant solution showed the best heat and mass recovery effectiveness at about 89.59% and 78.09%, respectively. LiCl solution was selected as the working fluid in the dehumidifier and regenerator due to its advisable absorption capacity and low regeneration temperature. Numerical simulations and experimental testing were carried out to work out the optimal dehumidifier/regenerator structure, size and running conditions. Furthermore, the simulation results proved that the cooling tower was capable to service the required low temperature cooling water and the solar collector had the ability to offer the heating energy no lower than the regeneration temperature 60℃. The coefficient-of-performance of this novel heat recovery/desiccant cooling system is proved to be as high as 13.0, with a cooling capacity of 5.6kW when the system is powered by renewable energy. This case is under the pre-set conditions that the environment air temperature is 36℃ and relative humidity is 50% (cities such as Hong Kong, Taiwan, Spain and Thailand, etc). Hence, this system is very useful for a hot/humid climate with plenty of solar energy. The theoretical modelling consisted of four numerical models is proved by experiments to predict the performance of the system within acceptable errors. Economic analysis based on a case (200m2 working office in London) indicated that the novel heat recovery/desiccant cooling system could save 5134kWh energy as well as prevent 3123kg CO2 emission per year compared to the traditional HVAC system. Due to the flexible nature of the fibre, the capital and maintenance cost of the novel cooling system is higher than the traditional HVAC system, but its running cost are much lower than the latter. Hence, the novel heat recovery/desiccant cooling system is cost effective and environment friendly technology.

In the UK, there are about 26 million houses and the government’s future plan is to build 3 million more by 2020 (BBC, 2008, Jason, 2011). As the demand for housing increases, especially for single occupant homes, the rate of energy consumption and, in effect, the proportion of CO2 emissions is on the rise. Successful sustainable energy strategies for domestic buildings can thus be an effective tool for mitigating these effects and achieving healthy building conditions. The main aim of the research are obtaining comfortable building spaces by reducing any overheating and reduce energy demand by using passive method which also will reduce the emission of CO2. Also this work aims to raise attention on the influence of the domestic sector on the amount of CO2 emissions by using low thermal mass construction. Thus, the research’s objectives are divided into firstly, investigate the opportunity of improving the Micronal Phase Change Material (MPCM) thermal conductivity and secondly, studying the influence of using enhanced MPCM for reducing overheating in lightweight building construction. This research investigates means of improving the thermal performance of the UKs existing and new domestic buildings stock. In order to increase thermal resistance and hence reduce heat losses, a new panel comprised of outer coating and thin layer or aerogel to increase thermal resistance was developed which could be added to the exterior walls of existing houses. This research results have shown from the experimental work when MPCM coupled with construction materials that the percentage of MPCM should not be above 50% otherwise it will reduce the potential benefit of the mixture to enhance thermal conductivity of MPCM. The best thermal conductivity was obtained by mixing 20% PCM, 75% Gypsum and 5% Silica with honeycomb, which gave a value of 0.306 W/mK. On the other hand, the best thermal conductivity was obtained using the clay by mixing 40% MPCM, 20% Clay and 40% cement, which gave a value of 0.253 W/mK. The simulation results shown that natural night ventilation could help reduce the overheating period to about 50% with the use of MPCM. Finally, The results of the new external wall panel that has been developed to improve the thermal performance have shown that through application of these panels a substantial reduction between 3 ºC to 5 ºC in the internal temperature.

Ventilation stacks are becoming increasingly common in the design of naturally ventilated buildings. The overall aim of the work described is ultimately to improve design procedures for such buildings. This thesis presents the experimental and theoretical investigation of unsteady wind effects on natural ventilation of a single envelope with multiple openings for both wind alone, and wind and buoyancy combined cases. There are two types of openings: namely the sharp-edged orifice and the long opening (stacks being treated as long openings). Two methods are adopted: 1) direct wind tunnel measurements using the hot-wire technique; 2) theoretical analysis using steady and unsteady envelope flow models. For the wind alone experiments, the influences of wind speed, wind direction and opening configuration on flow patterns are studied. For the wind and buoyancy combined tests, the transitional process between wind dominated and buoyancy dominated states are investigated. The direct velocity measurements provide the criteria for testing the validity of the theoretical models, and ways to improve them. Additionally, improvements are made to the experimental techniques: e.g. a precise unsteady calibration method of the hot-wire is developed; improvements of pressure measurements are also investigated. The experimental technique works well with multiple stacks. Even though small openings are used, some dependence of the mean pressure coefficient on opening configuration is observed. The theoretical models also work reasonably well with multiple stacks, yet it is observed that the accuracy of the theoretical models decrease with the increasing number of openings, and is sensitive to the chosen discharge coefficient which defines the characteristics of ventilation openings.