The purpose of the new building is the construction of sports and relaxation center in Jihlava in the Vysocina. The building will serve as a sports and leisure center also contains the 1st floor squash courts, relaxation area with jacuzzi, sauna and massage. In the 2nd floor will be located with aerobic fitness, office manager, a children's playground and a bar with seating. The building consists of two floors and a basement. External walls are lined with masonry elements of Heluz Family tl. 300 mm 3 square inches with excellent thermal insulation properties, the internal load-bearing walls of thick STI Heluz system. 300mm. The building can escape three unprotected pathways into the open towards the northwest and south. The building is situated in a slightly sloping terrain. From the main road to get to the building access road to the 1st floor. The overall height of the first floor is 4.00 m, the second floor is 4m and also underground floor is 3.40 m The building consists of three wings in the longitudinal structural system. The building has three floors: a basement and two floors. The roof is flat, single-layer, above the squash courts is inclined with an inclination of 6 degrees. The ground plan is mass divided into 3 wings on 1st floor with main entrance and staircase connecting all the floors in the middle of disposition. Ground object is longitudinally divided into differently sized parts of the corridor, which on each side of the staircase joining the center of the building. Check the plot is solved its own parking with direct entrance from the road.

The subject of this thesis is the construction of a residential building in the town of Brno Chrlice. It is a building with a fully podsklepeným floor and three floors. Basement part is designed as a garage and cellars. Floors are designed as units. The apartment building is a total of 8 units and 1 residential unit designed as wheelchair accessible. Total capacity is 22 Cladding basement of the formwork and floor are covered from the system HELUZ. The ceilings are designed as ceiling panels. Wood pitched roofing constructions with unbalanced tendencies. The building is based on the footings.

This Master´s thesis is focused on block of flats project documentation. The documentation is worked for building construction. Emphasis is placed on structural, space, fire safety, thermal and acoustic requirements. Masonry building is secluded and has four floors, without cellared, with a gabled roof. The building is designed with eight flats and one of these flats is designed for persons with reduced mobility.

This Master´s thesis is focused on block of flats project documentation, claims for fire safety and thermal and acoustic properties of structures. The brick building is detached and has three floors without basement. These floors are connected by a lift. The block of flats is based on the footings, external walls are insulated by a contact thermal insulation system. The tent roof is consists of truss in two levels. The building is designed for nine flats and one of these flats is wheelchair accessible. Truss design is also a part of the project.

The project is handled by complete documentation , brand new detached house with mountain restaurants at the level of documentation for construction . The building is designed in the village Olšany district. Šumperk on plot No. 261/1 , 261/5 , 261/9 and 261 of / 12. Built up area is 1465 square meters , of which the construction of the house itself has a 445.2 square meters . The basement and ground floor is used for restaurants, restaurant facilities and staff , reception and social facilities for guests . The second floor and the attic is designed to accommodate guests. The pension has a capacity of 20 people , of which there are six double rooms and two suites on the top floor , each for four people. The operation of the pension are a total of four employees. The restaurant , with a capacity of 102 people , the total number of employees 8 . The building is designed as two rectangles perpendicular to each other forming the letter T. The building is based on the footings of plain concrete foundation slab drag over the basics with reinforcing karisítí . Walling system from Heluz , partitions from the system Knauf, reinforced concrete ceilings . Outdoor perimeter walls is insulated with polystyrene foam . The roof is gabled and three graduated height of the ridge , where the highest elevation is the main part +11.370 m , roof pitch of 35 °. The building is connected to the local road and the available utilities. Proposal for hotel and restaurant is processed in accordance with applicable standards and regulations for the country.

Thesis multifunctional building in Chrudim is processed in the form of project documentation which comprises all the requisites required by current regulations. Designed multifunctional building is placed on the site number 3466 and 2110 in Chrudim. The building has four floors. Constructional system is from clay brick HELUZ, prestressed concrete ceiling panels, flat roof.

This thesis describes the design of multifunctional building in Chrudim. It is a three-storey building. The layout of the first floor is for public purposes. The second and third floors serve as the residential part. The building is covered with a flat roof.

The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.

This diploma thesis deals with design of office building with warehouse. The buildings are situated on slightly sloping terrain in cadastre unit of Sudoměřice u Tábora. Both buildings have rectangular shape and are connected with two sides. The Alemat s.r.o. company is internet shop, predominately with electronics. In the office building is also showroom where are some products will be shown. The warehouse will serve for receipt and issue of goods and to store them. The perimeter walls of office building is designed from ceramic block thickness of 250mm, for example Heluz Family 25. The walls will be insulated with 200mm of expanded polystyrene. The foundation construction is designed as foundation strips from plain concrete and permanent formwork brick filled with concrete and reinforced with steel. The ceiling construction is designed as prestressed panels thickness of 250mm. The roof is flat with main hydro isolation made of plasticized PVC foil loaded with pea gravel. The main construction of warehouse will be made of steel frames. The exterior skin of the warehouse will form panels Kingspan thickness of 140mm. The foundation construction is designed as monolithic foundation pads. Between the pads will be monolith grade beams. The roof is designed also from Kingspan panels. To the panel will be mechanically fastened plasticized PVC foil. Roof drainage is designed to rain gutters.

This thesis describes the design and processing of the convention center. The proposed house is located at the top of the square of Humpolec in the area designated for the construction of public facilities. The building consists of a basement, where there is a garage for the car owner and stores food for the kitchen. On the first floor there is a reception, restaurant and facilities for the kitchen. On the second floor are conference halls. In the third and fourth floor is accommodation for guests. The restaurant is designed for 55 people inside + outdoor terrace can seat about 30 people. Conference halls are designed for 90 people. Accommodation is for 28 guests. Outdoor parking is for 40 cars. Perimeter bearing walls are made of reinforced concrete + insulation. Interior bearing walls are made of reinforced concrete, interior non-bearing brick walls HELUZ. The ceilings are made of overstretched Spiroll panels and boards reinforced cross. For ceiling is plasterboard ceilings. The roof home is designed as a single-layer flat. Heating is effected by the heat pump. Wooden windows are six-chamber, aluminum doors. There is a staircase and an elevator. The proposed facility is designed wheelchair.