This thesis deals about a digitizer design. The digitizer is part of air-band monitoring receiver. Requirement is digitalization of two audio signals. The device communicates with PC through USB interface and it provides reading and writing to SD card. The STM32F4DISCOVERY development board with processor STM32F407VGT6 was used for design and function testing. This development kit is supplemented with other peripherals on an extern board (input audio circuits and SD slots). The thesis describes briefly theory for each issue which this project deals with. One part is engaged to the hardware design. Then there is a description of the PC software for the device controlling. The main part of the thesis is about the development of the firmware for MCU, which manages AD conversion, formatting of the voice signal, USB communication (HID and Mass Storage class), recording and reading from the SD card and additional peripherals.

The degree work is dedicated to MRI problems of compatible transmitter. The physical principle of magnetic resonance and the description of the construction of magnetic resonance apparatus are discussed in the first part of the work. Next the possibility of data transmission by means of infrared radiation and data transmission through USB are dealt with. The second part of the work is dedicated to the very implementation of transmitter and receiver, their hardware and software components. The discussion of the functionality of the apparatus and its utilization form part of the work.

Master thesis deals with design controllable switching power source. Device is supplied and controlled via USB bus of PC. The required output parameters are specified by user in a computer application. The teoretical part includes method of USB communication and introduction to switching power sources with focus on a Sepic topologii. The practical part describe individual circuit solution which contains of a complete device. Is analyzed in detail the proposal Sepic converter circuit and controling by microcontroller. The work also includes the design of microcontroller and computer applications. The result of this thesis is a functional device on which is the performed measurement.

This diploma thesis deals with design, realization and analysis of security and surveillance systems for buildings and spaces containing advanced components. One of the main design's parts is dedicated to intruder alarm system, access system, attendance and CCTV systems with the possibility of automatic motion tracking. Controlling and monitoring of particular subsystems is possible both locally and remotely from a computer via a web interface or by means of a software. The access to camera system from a mobile phone is also possible. IAS/ACS systems also enable controlling and transferring information about their state via SMS. The designed system was realized completely and its operating was demonstrated. The realization is described in detail including illustration of configuration of particular components. A security analysis and a possible future development of the project is summarized in the conclusion.

This diploma thesis deals with the design and construction of a three-axis CNC machine primarily designed for PCB drilling and production of front panels for various electronic devices. All three axes are driven by stepper motors NEMA 23 which are connected to stepper motor drivers L6470. Processor STM32F407 is used to control the whole machine. The wiring is completed by a LCD display with touchscreen which is used to communicate with user. Data for drilling can be entering manually or via USB inerface. Part of this thesis is the selection of a suitable construction and components, assembling equipment, wiring design of electronic circuits and writing the code to control the machine. Finally, the parameters of the designed device have been measured.