Brillouin scattering has been verified to be an effective mechanism in temperature and strain sensing. This kind of sensors can be applied to civil structural monitoring of pipelines, railroads, and other industries for disaster prevention. This thesis first presents a novel fiber sensing scheme for long-span fully-distributed pressure measurement based on Brillouin scattering in a side-hole fiber. After that, it demonstrates that Brillouin frequency keeps linear relation with temperature up to 1000°C; Brillouin scattering is a promising mechanism in high temperature distributed sensing. A side-hole fiber has two longitudinal air holes in the fiber cladding. When a pressure is applied on the fiber, the two principal axes of the fiber birefringence yield different Brillouin frequency shifts in the Brillouin scattering. The differential Brillouin scattering continuously along the fiber thus permits distributed pressure measurement. Our sensor system was designed to analyze the Brillouin scattering in the two principal axes of a side-hole fiber in time domain. The developed system was tested under pressure from 0 to 10,000 psi for 100m and 600m side-hole fibers, respectively. Experimental results show fibers with side holes of different sizes possess different pressure sensitivities. The highest sensitivity of the measured pressure induced differential Brillouin frequency shift is 0.0012MHz/psi. The demonstrated spatial resolution is 2m, which maybe further improved by using shorter light pulses. / Master of Science

This dissertation presents the novel creation of a surface relief fiber Bragg grating on the flat surface of a D-shaped optical fiber. In order to produce an efficient surface relief grating the grating must be etched into the surface of the glass fiber close to the core. A short etch that removes the cladding above the core is performed in order to decrease the core-to-flat distance and allow the light to interact with the grating on the flat surface. Due to the unique D-shape of the optical fiber the mechanical integrity of the fiber remains high even after the fabrication process. For traditional fiber Bragg gratings the index modulation occurs in the core of the optical fiber. While this method can produce highly reflective gratings they are not well suited for many sensing applications. For example, the operating temperature range is limited to a few hundred degrees Celsius before the index modulation returns to a more uniform index profile. Also because the gratings are created in the core of the fiber, interaction with the surrounding environment is limited. The surface relief fiber Bragg grating created for this work overcomes some of the sensing challenges of traditional gratings. The major accomplishments of this dissertation show a dramatic increase in operating temperature to over 1000 degrees Celsius, the ability to measure multi-dimensional bend, the ability to measure material changes around the fiber such as chemical concentration, and the ability to use a Vernier effect to dramatically increase the sensors sensitivity. In addition to the sensing applications of this work a more thorough understanding of the reflection and transmission properties of the surface relief grating is also presented. Implementation of the transfer matrix method for simulation of the gratings is also shown to be a fast and accurate modeling tool for predicting the grating response.