Fluorocarbons (FCs) and their derivatives (FCDs) are heavily relied on due to their wide range of uses (e.g. solvents, surfactants, refrigerants, and pharmaceuticals). Currently, FCs and FCDs are produced on an industrial scale via energy-intensive processes, using hazardous materials. Hence, new catalytic chemical technologies are required to provide cleaner and greener synthetic routes to partially fluorinated materials. The exploration of fundamental organofluorometallic chemistry of base metals, such as nickel, has potential to advance the development of novel catalytic processes towards this end. It has been established previously that zero-valent nickel complexes have the ability to efficiently catalyze the hydrodimerization of polyfluoroalkenes. The reactivity of the intermediate polyfluoronickelacycles was found to be influenced by modifications in the ligand sphere. Furthermore, an increase in oxidation state of the central metal atom was proposed as an additional strategy to increase the reactivity of the M-RF bond. In this thesis, through variation of the ligand environment and oxidation state of nickel, we have further developed the chemistry of high-valent polyfluoronickelacycles. Synthesis and characterization (NMR, EPR, UV/Vis, IR spectroscopy and electrochemistry) of new trivalent polyfluoronickelacycles are described as well as attempts to generate the corresponding tetravalent cations. Attempts to induce nucleophilic insertion of acetonitrile into the Ni-RF bond were also investigated herein. Challenges were encountered with the isolation of the tetravalent cations due to decomposition to the corresponding divalent nickelacycle.

Fluorocarbons (FCs) and their derivatives (FCDs) are heavily relied on due to their wide range of uses (e.g. solvents, surfactants, refrigerants, and pharmaceuticals). Currently, FCs and FCDs are produced on an industrial scale via energy-intensive processes, using hazardous materials. Hence, new catalytic chemical technologies are required to provide cleaner and greener synthetic routes to partially fluorinated materials. The exploration of fundamental organofluorometallic chemistry of base metals, such as nickel, has potential to advance the development of novel catalytic processes towards this end. It has been established previously that zero-valent nickel complexes have the ability to efficiently catalyze the hydrodimerization of polyfluoroalkenes. The reactivity of the intermediate polyfluoronickelacycles was found to be influenced by modifications in the ligand sphere. Furthermore, an increase in oxidation state of the central metal atom was proposed as an additional strategy to increase the reactivity of the M-RF bond. In this thesis, through variation of the ligand environment and oxidation state of nickel, we have further developed the chemistry of high-valent polyfluoronickelacycles. Synthesis and characterization (NMR, EPR, UV/Vis, IR spectroscopy and electrochemistry) of new trivalent polyfluoronickelacycles are described as well as attempts to generate the corresponding tetravalent cations. Attempts to induce nucleophilic insertion of acetonitrile into the Ni-RF bond were also investigated herein. Challenges were encountered with the isolation of the tetravalent cations due to decomposition to the corresponding divalent nickelacycle.

Fluorocarbons (FCs) and their derivatives (FCDs) are heavily relied on due to their wide range of uses (e.g. solvents, surfactants, refrigerants, and pharmaceuticals). Currently, FCs and FCDs are produced on an industrial scale via energy-intensive processes, using hazardous materials. Hence, new catalytic chemical technologies are required to provide cleaner and greener synthetic routes to partially fluorinated materials. The exploration of fundamental organofluorometallic chemistry of base metals, such as nickel, has potential to advance the development of novel catalytic processes towards this end. It has been established previously that zero-valent nickel complexes have the ability to efficiently catalyze the hydrodimerization of polyfluoroalkenes. The reactivity of the intermediate polyfluoronickelacycles was found to be influenced by modifications in the ligand sphere. Furthermore, an increase in oxidation state of the central metal atom was proposed as an additional strategy to increase the reactivity of the M-RF bond. In this thesis, through variation of the ligand environment and oxidation state of nickel, we have further developed the chemistry of high-valent polyfluoronickelacycles. Synthesis and characterization (NMR, EPR, UV/Vis, IR spectroscopy and electrochemistry) of new trivalent polyfluoronickelacycles are described as well as attempts to generate the corresponding tetravalent cations. Attempts to induce nucleophilic insertion of acetonitrile into the Ni-RF bond were also investigated herein. Challenges were encountered with the isolation of the tetravalent cations due to decomposition to the corresponding divalent nickelacycle.

Fluorocarbons (FCs) and their derivatives (FCDs) are heavily relied on due to their wide range of uses (e.g. solvents, surfactants, refrigerants, and pharmaceuticals). Currently, FCs and FCDs are produced on an industrial scale via energy-intensive processes, using hazardous materials. Hence, new catalytic chemical technologies are required to provide cleaner and greener synthetic routes to partially fluorinated materials. The exploration of fundamental organofluorometallic chemistry of base metals, such as nickel, has potential to advance the development of novel catalytic processes towards this end. It has been established previously that zero-valent nickel complexes have the ability to efficiently catalyze the hydrodimerization of polyfluoroalkenes. The reactivity of the intermediate polyfluoronickelacycles was found to be influenced by modifications in the ligand sphere. Furthermore, an increase in oxidation state of the central metal atom was proposed as an additional strategy to increase the reactivity of the M-RF bond. In this thesis, through variation of the ligand environment and oxidation state of nickel, we have further developed the chemistry of high-valent polyfluoronickelacycles. Synthesis and characterization (NMR, EPR, UV/Vis, IR spectroscopy and electrochemistry) of new trivalent polyfluoronickelacycles are described as well as attempts to generate the corresponding tetravalent cations. Attempts to induce nucleophilic insertion of acetonitrile into the Ni-RF bond were also investigated herein. Challenges were encountered with the isolation of the tetravalent cations due to decomposition to the corresponding divalent nickelacycle.

High-valent transition metal-oxo intermediates play a significant role in the catalytic cycle of the ubiquitous cytochrome P450 enzymes and in biomimetic catalytic systems. In this work, manganese(III) porphyrin and corrole systems (2) were synthesized and characterized by UV-vis absorbance and 1H-NMR, matching literaturereported spectroscopic data. Manganese(V)-oxo corroles (3) and a manganese(IV)-oxo porphyrin (4) were successfully generated by chemical oxidation using mchloroperoxybenzoic acid (m-CPBA), and their oxidation reactions with organic reductants were comparatively investigated. Results from single-turnover kinetic studies indicate that in the tris(pentafluorophenyl)corrole system (3a), the active oxidizing intermediate differs in different solvents. The active oxidizing intermediate in acetonitrile is likely the manganese(V)-oxo species 3a. However, in dichloromethane, the active oxidant is suspected to be a putative manganese(VI)-oxo species generated by disproportionation of the manganese(V)-oxo species. Tris(pentafluorophenyl)corrolato manganese(III) (2a) was shown to selectively catalyze sulfoxidation and epoxidation with iodobenzene diacetate [PhI(OAc)2] as a mild oxygen source. 2a exhibited higher conversions than triphenylcorrolato manganese(III) (2b), most likely because of the higher stability of 2a compared to 2b. In contrast, tetramesitylporphyrinato manganese(III) (2c) was more efficient in catalytic oxidations than 2a, resulting in much higher conversions, but much less selectivity. Other reported metalloporphyrin and metallocorrole systems show an accelerating effect upon addition of small amounts of water; however, neither corrole systems exhibited a positive water effect. This is attributed to the strong coordination between the manganese center and water, preventing the oxygen source from coordination.

High-valent iron(IV)-oxo porphyrins are the central oxidizing species in hemecontaining enzymes and synthetic oxidation catalysts. Many transition metal complexes have been extensively studied as models of the ubiquitous cytochrome P450 enzymes to probe the sophisticated oxygen atom transfer (OAT) mechanism as well as to invent enzyme-like oxidation catalysts. In this work, two metalloporphyrin complexes have been successfully synthesized, and spectroscopically characterized. A new photochemical entry to porphyrin-iron(IV)-oxo derivatives, commonly referred to as compound II models, was also investigated in two porphyrin ligands that differ in electronic and steric environments. As determined by their distinct UV-vis spectra and kinetic behaviors, iron(IV)-oxo porphyrins [FeIV(Por)O] were successfully produced by visible light irradiation of highly photo-liable porphyrin-iron(III) bromates. The iron(IV)-oxo porphyrins investigated in this study include 5,10,15,20- tetra(pentafluorophenyl)porphyrin-iron(IV)-oxo (4a), and 5,10,15,20-tetra(2,6- difluorophenyl)porphyrin-iron(IV)-oxo (4b).

In nature, transition metal containing enzymes display many biologically important, attractive and efficient catalytic oxidation reactions. Many transition metal catalysts have been designed to mimic the predominant oxidation catalysts in nature, namely, the cytochrome P450 enzymes. Ruthenium porphyrin complexes have been the center of this research and have successfully been utilized, as catalysts, in major oxidation reactions, such as the hydroxylation of alkanes. The present work focuses on photocatalytic studies of aerobic oxidation reactions with well characterized ruthenium porphyrin complexes. The photocatalytic studies of aerobic oxidation reactions of hydrocarbons The photocatalytic studies of aerobic oxidation reactions of hydrocarbons catalyzed by a bis-porphyrin-ruthenium(IV) μ-oxo dimer using atmospheric oxygen as the oxygen source in the absence of co-reductants were investigated. The ruthenium(IV) μ-oxo bisporphyrin (3a-d) was found to catalyze aerobic oxidation of a variety of organic substrates efficiently. By comparison, 3d was found to be a more efficient photocatalyst than the well-known 3a under identical conditions. A KIE at 298K was found to be larger than those observed in autoxidation processes, suggesting a nonradical mechanism that involved the intermediacy of ruthenium(V)-oxo species as postulated. The reactivity order in the series of ruthenium(IV) μ-oxo bisporphyrin complexes follows TPFPP>4- CF3TPP>TPP, and is consistent with expectations based on the electrophilic nature of the ruthenium(IV) μ-oxo bisporphyrin species. The trans-dioxoruthenium(VI) porphyrins have been among the best characterized metal-oxo intermediates and their involvement as the active oxidant in the hydrocarbon oxidation have been extensively studied. In addition to the well-known chemical methods, we developed a novel approach for generation of trans-dioxoruthenium( VI) porphyrins with visible light by extension of the known photoinduced ligand cleavage reactions. A series of trans-dioxoruthenium(VI) porphyrin complexes (6a-d) were photochemically synthesized and spectroscopically characterized by UV-vis, and 1H-NMR.

Highly reactive iron-oxo intermediates play important roles as active oxidants in enzymatic and synthetic catalytic oxidation. Many transition metal catalysts are designed for biomimetic studies of the predominant oxidation catalysts in Nature, namely cytochrome P450 enzymes. In this work, a series of iron(IV)-oxo porphyrins [FeIV(Por)O] and manganese(IV)-oxo porphyrins [MnIV(Por)O] have been successfully produced in two electron-deficient ligands by photochemical and chemical methods, and spectroscopically characterized by UV-vis, and 1H-NMR. With iodobenzene diacetate [PhI(OAc)2] as the oxygen source, iron(III) porphyrin and manganese(III) porphyrin complexes converted to the corresponding metal(IV)-oxo species as oxygen atom transfer (OAT) agents. In addition, a new photochemical method was developed to generate the same species by visible light irradiation of highly photo-labile porphyrin-iron(III) bromate or porphyrin-manganese(III) chlorate precursors. Furthermore, the kinetics of oxygen transfer atom reactions with alkene, active hydrocarbons and aryl sulfides by photo-generated and chemical-generated [FeIV(Por)O]were studied in CH3CN solutions. Apparent second-order rate constants determined under pseudo-first-order conditions for sulfide oxidation reactions are (9.8 ± 0.1) × 102 − (3.7 ± 0.3) × 101 M-1s-1, which are 3 to 4 orders of magnitude greater in comparison with those of alkene epoxidations and activated C-H bond oxidations by the same oxo species.

This thesis comprises three projects focused on the use of the combination of catalytic copper and iodonium salts towards the functionalisation of alkenes. Chapter 2 details the development of an enantioselective and regiodivergent allylic amide arylation procedure using a specific copper(II)-bisoxazoline pre-catalyst and hexafluorophosphate diaryliodonium salts. The regioselectivity of the process was discovered to be controlled by the electronic properties of the iodane employed, allowing enamide production to be biased with electron-poor iodonium salts and oxazines to be produced with electron-rich analogues. An overall scope of 38 compounds was collaboratively elaborated, with 20 synthesised personally. All products were generated in useful yields and high levels of enantioselectivity. Chapter 3 describes efforts towards the application of a copper-catalysed oxy-alkenylation procedure to the production of the macrolidal natural product (-)-lyngbyaloside B. It is proposed that an elaborate homoallylic carbamate may be coupled with a complex polyoxygenated alkenyl(aryl)iodonium salt as a fragment coupling for polyketide synthesis. Following extensive investigations, it was discovered that the challenging vinyl-iodonium salt could be synthesised in good yields and then coupled with the desired homoallylic carbamate, albeit in limited yield and low d.r. Chapter 4 presents initial studies towards a computational understanding of the copper-catalysed arylation of alkenes with iodonium salts. Evidence is presented to suggest that two functionalisation modes are energetically accessible, allowing the production of regioisomeric arylated products.

No description available.