1 |
Amine-functionalized polymeric hollow fiber sorbents for post-combustion CO2 captureLi, Fuyue 12 January 2015 (has links)
Polymeric hollow fiber sorbents were functionalized with amine moieties for improving the carbon dioxide sorption capacity from flue gas to reduce the greenhouse gas emissions from coal-fired power plants. Three different experimental pathways were studied to form the amine-functionalized hollow fiber sorbents. Aminosilane functionalized cellulose acetate (CA) fibers, polyethyleneimine (PEI) functionalized polyamide-imide (PAI, Torlon®) fibers and PEI post-infused and functionalized Torlon®-silica fibers were formed. CO2 equilibrium sorption capacity data were collected by using the pressure decay sorption cell and thermal gravimetric analyzer. Other physio-chemical properties of the amine-functionalized fiber sorbents were characterized by using fourier-transform infrared spectroscopy, elemental analysis, and scanning electronic microscopy. Different reaction conditions were studied on the effect of sorption isotherms. Aminosilane-CA fibers were the first proof-of-concept for forming the amine functionalized polymer hollow fibers. PEI-PAI fibers were designed as a new method to reach enhanced sorption capacities than Aminosilane-functionalized CA fibers. PEI post-infused and functionalized Torlon®-silica fibers have further enhanced sorption capacity; however they easily degrade with similar reaction for forming PEI-PAI fibers. Lumen-side barrier layers were created successfully via post-treatment technique of using the crosslinked Neoprene® polymer onto PEI-functionalized PAI fibers. PEI-functionalized PAI fibers also have good cyclic stability and low heat of sorption.
|
2 |
Amine-functionalized polymeric hollow fiber sorbents for post-combustion CO₂ captureLi, Fuyue 12 January 2015 (has links)
Polymeric hollow fiber sorbents were functionalized with amine moieties for improving the carbon dioxide sorption capacity from flue gas to reduce the greenhouse gas emissions from coal-fired power plants. Three different experimental pathways were studied to form the amine-functionalized hollow fiber sorbents. Aminosilane functionalized cellulose acetate (CA) fibers, polyethyleneimine (PEI) functionalized polyamide-imide (PAI, Torlon® fibers and PEI post-infused and functionalized Torlon®-silica fibers were formed. CO₂ equilibrium sorption capacity data were collected by using the pressure decay sorption cell and thermal gravimetric analyzer. Other physio-chemical properties of the amine-functionalized fiber sorbents were characterized by using fourier-transform infrared spectroscopy, elemental analysis, and scanning electronic microscopy. Different reaction conditions were studied on the effect of sorption isotherms. Aminosilane-CA fibers were the first proof-of-concept for forming the amine functionalized polymer hollow fibers. PEI-PAI fibers were designed as a new method to reach enhanced sorption capacities than Aminosilane-functionalized CA fibers. PEI post-infused and functionalized Torlon®-silica fibers have further enhanced sorption capacity; however they easily degrade with similar reaction for forming PEI-PAI fibers. Lumen-side barrier layers were created successfully via post-treatment technique of using the crosslinked Neoprene® polymer onto PEI-functionalized PAI fibers. PEI-functionalized PAI fibers also have good cyclic stability and low heat of sorption.
|
3 |
Analyses of Dose-Response and Mechanistic Action of Different Anti-Cancer Drugs for Neuroendocrine Tumor Cell LinesLarsson, Dhana E January 2011 (has links)
Cancer is a disease with poor response rates on available treatments. Problems with resistance and intolerance against cancer drugs are major reasons for failure of the drugs. The need to discover new cancer drugs is important. In this thesis screening of new cancer drugs and evaluation of their mechanism of action are discussed. The aim of the thesis was to find new compounds active against neuroendocrine tumors (NETs). In paper I, we screened 1280 substances on two bronchial carcinoid cell lines and one pancreatic carcinoid cell line. Eleven of these compounds were found to have antitumor activity at low concentrations. The most active agents were brefeldin A, emetine, bortezomib and idarubicin, having IC50 values (the concentration of the drug where > 50% of the cells die) < 1μM. In addition, sanguinarine, Bay11-7085, mitoxantrone, doxorubicin, β-lapachone, NSC 95397 and CGP- 74514A were active with IC50 values < 10 μM. In paper II, additional studies have been undertaken to investigate the combination effect of the most active drugs with conventional cytotoxic drugs used in clinical practice. If synergistic or additive effects are found, drugs with different mechanism of action and toxicity profiles may be combined, making it possible to reduce the toxic effects yet maintaining the antitumor activity. In paper III, studies were undertaken to find the mechanistic action, apoptosis or necrosis, of the drugs NSC 95397, brefeldin A, bortezomib and sanguinarine in NETs. All four drugs were shown to induce caspase-3 activity and nuclear fragmentation/condensation in the neuroendocrine tumor cell lines, indicating that their antitumor activity was induction of apoptosis. In paper IV, the mechanism of action was studied for CGP-74514A and emetine. Both drugs worked by induction of apoptosis. In addition, their cytotoxic activity was studied in a three-dimensional model, the in vitro hollow fiber model. The Hollow Fiber model permits more realistic simulation of in vivo drug effects in a controlled system providing data that more accurately reflects biological responses. Our results showed that the hollow fiber model may be suitable for studies of new drugs in the neuroendocrine tumor cell lines. / Title corrected from: Analyses of Dos-Response and Mechanistic Action of Different Anti-Cancer Drugs for Neuroendocrine Tumor Cell Lines
|
4 |
CFD investigation of Mass Transfer to Crimped Hollow Fiber MembranesNanduri, Sricharan January 2011 (has links)
No description available.
|
5 |
Characterization of the hollow fiber assay for the determination of microtubule disruption in vivo.Suggitt, Marie, Swaine, David J., Pettit, G.R., Bibby, Michael C. January 2004 (has links)
No / Purpose: The hollow fiber assay is used successfully as a routine in vivo screening model to quantitatively define anticancer activity by the National Cancer Institute. This study investigates whether the hollow fiber assay can be used as a short-term in vivo model to demonstrate specific pharmacodynamic end points, namely microtubule and cell cycle disruption.
Experimental Design: The growth of A549 cells was characterized within hollow fibers over 5 days in vivo at both subcutaneous (s.c.) and intraperitoneal (i.p.) sites. Drugs were administered on day 4 (i.p.).
Results: At 24 hours, cells were retrieved from fibers at both i.p. and s.c. sites of paclitaxel-treated (20 mg/kg) and combretastatin A1 phosphate¿treated (150 mg/kg) mice. Cell cycle analysis after paclitaxel treatment revealed a mean G2-M phase population of 48.04% (i.p.) and 25.76% (s.c.) compared with vehicle group mice (6.78 and 5.56%, respectively; P = <0.001 and 0.005, respectively). Tumor cells retrieved from combretastatin A1 phosphate¿treated mice had a mean G2-M phase population of 36.3% (i.p.) and 29.36% (s.c.) compared with cells retrieved from vehicle group mice (5.58 and 5.49%, respectively; P = <0.001). Using fluorescence and laser-confocal microscopy, paclitaxel was revealed to induce the formation of spindle asters and tubulin polymerization. Combretastatin A1 phosphate was shown to hold cells in mitosis. Changes in nuclear morphology were also observed.
Conclusion: These data demonstrate that the hollow fiber assay can be used as a short-term in vivo model for studying the pharmacodynamic effects of both standard and novel compounds on microtubules. Evidence has also been provided to support the routine use of the in vivo hollow fiber assay for demonstrating the mechanism of action of a drug.
|
6 |
Advanced crosslinkable polyimide membranes for aggressive sour gas separationsKraftschik, Brian E. 12 January 2015 (has links)
The glassy copolyimide 6FDA-DAM:DABA was investigated as a polymer backbone for membranes used in aggressive sour gas separation applications. An esterification crosslinking mechanism enabled the synthesis of materials with augmented H₂S/CH₄ selectivity and plasticization resistance. These materials make use of polyethylene glycol (PEG) crosslinking agents and are referred to as PEGMC polymers. Rigorous dense film characterization of the novel crosslinkable materials indicates that excellent H₂S/CH₄ selectivity (24) is achievable while still maintaining high CO₂/CH₄ selectivity (29) under high pressure ternary mixed gas (CO₂/H₂S/CH₄) feeds. Defect-free asymmetric hollow fiber membranes were formed and appropriate crosslinking conditions were determined, allowing for the characterization of these fibers under realistic sour gas feed conditions. Also, a PDMS post-treatment was used to give ultra-high permselectivity for aggressive feeds. Using several mixed gas feeds containing high concentrations of CO₂ and H₂S at feed pressures up to 700 psig, it is shown that the crosslinked asymmetric hollow fiber membranes developed and manufactured through this work are capable of maintaining excellent separation performance even under exceedingly taxing operating conditions. For example, CO₂/CH₄ and H₂S/CH₄ permselectivity values of 47 and 29, respectively, were obtained for a 5% H₂S, 45% CO₂, 50% CH₄ feed at 35°C with 700 psig feed pressure. An extremely aggressive 20% H₂S, 20% CO₂, 60% CH₄ mixed gas feed with 500 psig feed pressure was also used; the maximum CO₂/CH4 and H₂S/CH₄ permselectivity values were found to be 38 and 22, respectively.
|
7 |
Characterization of Biofilms in a Synthetic Rhizosphere Using Hollow Fiber Root-Mimetic SystemsBonebrake, Michelle 01 August 2019 (has links)
The area around a plant’s roots hosts a complex and diverse microbial community. This environment can include a large number of bacteria that live on the surface of the root and benefit from the nutrients that the roots exude into the soil. These microbes can in turn be beneficial to the plant by protecting the roots from harmful fungi or stressful environmental conditions such as drought. In this thesis, several root-mimetic systems (RMSs) were developed for the study and growth of plant-beneficial bacteria in the laboratory environment. The RMS uses a porous hollow fiber used in hemodialysis as a surface for microbial growth. This fiber can either be draped into liquid nutrients or nutrients can be pumped through the hollow fiber with seepage through pores in the fiber to the outside. These systems are simple but well-controlled models of how a root would feed a bacterial community. The RMSs can be used to study how bacteria receiving nutrients through the RMS react to external factors, and if the bacterial response varies with nutrients received through the fiber. One such application is to study how plant colonizing microbes react to stressors like nanoparticle technology, a growing part of the fertilizer industry.
Several different commercial hollow fiber membranes were explored as possible surfaces for microbe attachment. A synthetic polysulfone / polyvinylpyrrolidone hollow fiber membrane, treated with bleach to change the surface properties, was found to be a favorable surface for attachment of the beneficial root-colonizing microbe Pseudomonas chlororaphis O6 (PcO6). In addition to hollow fiber membrane chemistry, the nutrient composition delivered to the bacteria strongly influenced surface colonization and biofilm formation. Thus, using the hollow fiber root model, bacteria can be studied with respect to their responses to changes in nutrient composition as well as their response to stressors such as nanoparticles. Contrasted with studying bacteria on a living root, the model systems developed in this thesis allow microbes to be investigated without the added complexity of unknown variations in the nutrients that the roots pump into the soil.
|
8 |
Characterizing Hollow Fiber Membranes an Application of Sequential Design of ExperimentsNemetz, Leo Richard 15 June 2023 (has links)
No description available.
|
9 |
Theoretical studies of Hollow Fiber SpinningSU, YANG 11 September 2007 (has links)
No description available.
|
10 |
Experimental Studies on CO2 Absorption in Hollow Fiber Membrane ContactorLu, Yuexia January 2010 (has links)
Membrane gas absorption technology is considered as one of the promising alternatives to conventional techniques for CO2 separation from the flue gas of fossil fuels combustion. As a hybrid approach of chemical absorption and membrane separation, it may offer a number of important features, including operational flexibility, compact structure, linear scale up and predictable performance. The main challenge is the additional membrane mass transfer resistance, especially when this resistance increases due to the absorbent intruding into the membrane pores. In this thesis, the experimental was set up to investigate how the operating parameters affect the absorption performance when using absorbent in hollow fiber contactor, and to obtain the optimal range of operation parameters for the designated membrane gas absorption system . During 20 days’ continuous experiment, we observed that the CO2 mass transfer rate decreases significantly following the operating time, which is attributed to the increase of membrane mass transfer resistance resulting from partial membrane wetting. To better understand the wetting evolution mechanism, the immersion experiments were carried out to assume that the membrane fibers immersed in the absorbents would undergo similar exposure as those used in the membrane contactor. Various membrane characterization methods were used to illustrate the wetting process before and after the membrane fibers were exposed to the absorbents. The characterization results showed that the absorbent molecules diffuse into the polypropylene (PP) polymer during the contact with the membrane, resulting in the swelling of the membrane. In addition, the effects of operating parameters such as immersion time, CO2 loading, as well as absorbent type on the membrane wetting were investigated in detail. Finally, based on the analysis results, methods to smooth the membrane wetting were discussed. It was suggested that improving the hydrophobicity of PP membrane by surface modification may be an effective way to improve the membrane long-term performance. Modification of the polypropylene membrane by depositing a rough layer of PP was carried out in order to improve the non-wettability of membrane. The comparison of long-term CO2 absorption performance by PP membranes before and after modification proves that the modified polypropylene membranes retained higher hydrophobicity than the untreated polypropylene membrane. Therefore modification is likely to be more suitable for use in membrane gas absorption contactors for CO2 separation, particularly over long operation time.
|
Page generated in 0.0575 seconds