1 |
Calcium Aluminates Synthesis, Characterization, and Hydration BehaviorGriffin, Joseph George 12 1900 (has links)
The hydration behavior of the calcium aluminates as a function of the glass content, the curing temperature, and the water-solid ratio was investigated. In order to keep them from influencing the results, the free-lime content and the surface area of all samples were kept constant, whenever possible. Samples were hydrated with a water-solid ratio of 10/1 for periods of 1 to 90 days. Three curing temperatures were studied; 2°C, 25°C, and 50°C. Samples were hydrated in tightly sealed polyethylene containers to prevent reactions with atmospheric carbon dioxide. The hydration was followed by X-ray diffraction and thermal analysis. Only two samples, Hexacalcium Tetra-alumino Magnesium Silicate and Tricalcium Magnesium Dialuminate, were successfully prepared in an amorphous form. These compounds were used to investigate the effect of glass content on the hydration behavior. Results indicate that when the glass content is increased a corresponding increase is found in the percent combined water. Samples hydrated at 25°C were influenced by changes in the glass content to a greater degree than were those hydrated at either 2°C or 50°C. The effect of the water-solid ratio on the hydration behavior of the calcium aluminates was studied using the compounds; Hexacalcium Tetra-Alumino Magnesium Silicate/ and Dodecacalcium Hepta-Aluminate. In general, samples that were hydrated with large water-solid ratios reacted more completely than did those hydrated with small water-solid ratios. The presence of sufficient water to theoretically hydrate the samples to completion did not guarantee that the sample would do so. The curing temperature influenced the hydration behavior to a greater degree than did the glass content or the water-solid ratio. Increasing the curing temperature not only increased the rate of hydration, but, in some cases, also changed the hydration products.
|
Page generated in 0.07 seconds