Made available in DSpace on 2014-12-17T14:55:50Z (GMT). No. of bitstreams: 1 AndersonMCS_DISSERT.pdf: 542550 bytes, checksum: cf969edd5c8c6cd5c0f0dcbf4f8113e0 (MD5) Previous issue date: 2011-07-26 / The modern society depends on an efficient communications system able to of transmitting and receiving information with a higher speed and reliability every time. The need for ever more efficient devices raises optimization techniques of microstrip devices, such as techniques to increase bandwidth: thicker substrates and substrate structures with EBG (Electromagnetic Band Gap) and PBG (Photonic Band Gap). This work has how aims the study of the application of PBG materials on substrates of planar structures in microstrip, more precisely in directional quadrature couplers and in rat-race and impedance of transformers. A study of the planar structures in microstrip and substrates EBG is presented. The PBG substrates can be used to optimize the radiation through the air, thus reducing the occurrence of surface waves and the resulting diffraction edge responsible for degradation of radiation pattern. Through specific programs in FORTRAN Power Station obtained the frequencies and couplings for each structure. Are used the program PACMO - Computer Aided Design in Microwave. Results are obtained of the frequency and coupling devices, ranging the frequency band used (cellular communication and Wimax systems) and the permittivity of the substrate, comparing the results of conventional material and PBG materials in the s and p polarizations. / A sociedade moderna depende de um eficiente sistema de comunica??es, capaz de transmitir e receber informa??es com uma velocidade e confiabilidade maiores a cada momento. A necessidade de dispositivos cada vez mais eficientes faz surgir t?cnicas de otimiza??o dos dispositivos em microfita, como por exemplo, t?cnicas para aumentar a largura de banda: substratos mais espessos e estruturas com substratos de Banda Eletromagn?tica Proibida - EBG (Electromagnetic Band Gap) e Banda Fot?nica Proibida - PBG (Photonic Band Gap). Este trabalho tem como objetivo o estudo da aplica??o de materiais EBG/PBG em substratos de estruturas planares em microfita, mais precisamente em acopladores direcionais em quadratura e em anel e em transformadores de imped?ncias. ? apresentado um estudo das estruturas planares em microfita e dos substratos EBG/PBG. Substratos PBG podem ser usados para otimizar a irradia??o pelo ar, reduzindo assim a ocorr?ncia de ondas superficiais e a conseq?ente difra??o de borda respons?vel pela degrada??o do diagrama de radia??o. Atrav?s de programas espec?ficos em FORTRAN obtiveram-se as freq??ncias e acoplamentos para cada estrutura. Foi utilizado o programa PACMO Projeto Auxiliado por Computador para Microondas. S?o obtidos resultados da freq??ncia e acoplamentos dos dispositivos, variando-se banda de freq??ncia utilizada (sistemas de comunica??o celular e Wimax) e a permissividade do substrato, comparando-se os resultados de materiais convencionais e materiais PBG nas polariza??es s e p.

Nuclear quadropole spectroscopy is a modern analytical method for detecting specific solid state materials, e.g. explosives, drugs etc. It uses phenomenon of atomic nucleus called nuclear quadrupole moment. NQR method is very similar to common nuclear magnetic resonance (NMR) that is why major principles are explained using NMR. The thesis deals with basic principle of NQR, its usage for explosives detection and also detection of other chemical compounds and many other useful applications. The thesis deals with specific circuit design, techniques for sufficient sensitivity, impedance matching and circuit isolation. Practical part consists of simulations as well as designs of a few impedance transformers, pi-networks, and coils. Also experimental probe was created. In the last part, NQR workplace was assembled and a few chemical compounds were detected. These were KClO3, NaClO3 and NaNO2 . Finally minimum detectable amount of potassium chlorate as the strongest signal of these was determined.

Communication and reconnaissance systems are requiring increasing flexibility concerning functionality and efficiency for multiband and broadband frequency applications. Circuit-based reconfiguration mechanisms continue to promote radio frequency (RF) application flexibility; however, increasing limitations have resulted in hindering performance. Therefore, the implementation of a "wireless" reconfiguration mechanism provides the required agility and amicability for microwave circuits and antennas without local overhead. The wireless reconfiguration mechanism in this thesis integrates dynamic, fluidic-based material systems to achieve electromagnetic agility and reduce the need for "wired" reconfiguration technologies. The dynamic material system component has become known as electromagnetically functionalized colloidal dispersions (EFCDs). In a microfluidic reconfiguration system, they provide electromagnetic agility by altering the colloidal volume fraction of EFCDs - their name highlights the special considerations we give to material systems in applied electromagnetics towards lowering loss and reducing system complexity. Utilizing EFCDs at the RF device-level produced the first circuit-type integration of this reconfiguration system; this is identified as the coaxial stub microfluidic impedance transformer (COSMIX). The COSMIX is a small hollowed segment of transmission line with results showing a full reactive loop (capacitive to inductive tuning) around the Smith chart over a 1.2 GHz bandwidth. A second microfluidic application demonstrates a novel antenna reconfiguration mechanism for a 3 GHz microstrip patch antenna. Results showed a 300 MHz downward frequency shift by dielectric colloidal dispersions. Magnetic material produced a 40 MHz frequency shift. The final application demonstrates the dynamically altering microfluidic system for a 3 GHz 1x2 array of linearly polarized microstrip patch antennas. The parallel microfluidic capillaries were imbedded in polydimethylsiloxane (PDMS). Both E- and H-plane designs showed a 250 MHz frequency shift by dielectric colloidal dispersions. Results showed a strong correlation between decreasing electrical length of the elements and an increase of the volume fraction, causing frequency to decrease and mutual coupling to increase. Measured, modeled, and analytical results for impedance, voltage standing wave ratio (VSWR), and radiation behavior (where applicable) are provided.

Communication and reconnaissance systems are requiring increasing flexibility concerning functionality and efficiency for multiband and broadband frequency applications. Circuit-based reconfiguration mechanisms continue to promote radio frequency (RF) application flexibility; however, increasing limitations have resulted in hindering performance. Therefore, the implementation of a "wireless" reconfiguration mechanism provides the required agility and amicability for microwave circuits and antennas without local overhead. The wireless reconfiguration mechanism in this thesis integrates dynamic, fluidic-based material systems to achieve electromagnetic agility and reduce the need for "wired" reconfiguration technologies. The dynamic material system component has become known as electromagnetically functionalized colloidal dispersions (EFCDs). In a microfluidic reconfiguration system, they provide electromagnetic agility by altering the colloidal volume fraction of EFCDs - their name highlights the special considerations we give to material systems in applied electromagnetics towards lowering loss and reducing system complexity. Utilizing EFCDs at the RF device-level produced the first circuit-type integration of this reconfiguration system; this is identified as the coaxial stub microfluidic impedance transformer (COSMIX). The COSMIX is a small hollowed segment of transmission line with results showing a full reactive loop (capacitive to inductive tuning) around the Smith chart over a 1.2 GHz bandwidth. A second microfluidic application demonstrates a novel antenna reconfiguration mechanism for a 3 GHz microstrip patch antenna. Results showed a 300 MHz downward frequency shift by dielectric colloidal dispersions. Magnetic material produced a 40 MHz frequency shift. The final application demonstrates the dynamically altering microfluidic system for a 3 GHz 1x2 array of linearly polarized microstrip patch antennas. The parallel microfluidic capillaries were imbedded in polydimethylsiloxane (PDMS). Both E- and H-plane designs showed a 250 MHz frequency shift by dielectric colloidal dispersions. Results showed a strong correlation between decreasing electrical length of the elements and an increase of the volume fraction, causing frequency to decrease and mutual coupling to increase. Measured, modeled, and analytical results for impedance, voltage standing wave ratio (VSWR), and radiation behavior (where applicable) are provided.

The Archimedean spiral antenna is well-known for its broadband characteristics with circular polarization and has been investigated for several decades. Since their development in the late 1950's, establishing an analytical expression for the characteristics of spiral antenna has remained somewhat elusive. This has been studied qualitatively and evaluated using numerical and experimental techniques with some success, but many of these methods are not convenient in the design process since they do not impart any physical insight into the effect each design parameter has on the overall operation of the spiral antenna. This work examines the operation of spiral antennas and obtains a closed-form analytical solution by conformal mapping and transmission line model with high precision in a wide frequency band. Based on the analysis of spiral antenna, we propose two novel design processes for the stripline-fed Archimedean spiral antenna. This includes a stripline feed network integrated into one of the spiral arms and a broadband tapered impedance transformer that is conformal to the spiral topology for impedance matching the nominally-high input impedance of the spiral. A Dyson-style balun located at the center facilitates the transition between guided stripline and radiating spiral modes. Measured and simulated results for a probe-fed design operating from 2 GHz to over 20 GHz are in excellent agreements to illustrate the synthesis and performance of a demonstration antenna. The research in this work also provides the possibility to achieve conformal integration and planar structural multi-functionality for an Unmanned Air Vehicle (UAV) with band coverage across HF, UHF, and VHF. The proposed conformal mapping analysis can also be applied on periodic coplanar waveguides for integrated circuit applications.