This diploma thesis deals with the research the effect of the application of selenium as a fertilizer in the substrate mycelium of oyster mushroom (Pleurotus ostreatus) on the growth of this element in the dry state mushroom. Utilization of the cumulative mushrooms characteristic, i.e. the ability to cumulate into them the substance from the enviroment. The purpose of this experiment is the possibility of using the enriched oyster mushroom (Pleurotus ostreatus) on selenium as a potential functional food. The theoretical is focused on explaining the various terms of fungus, its composition, characteristics and effects on the human body, focusing mainly on oyster mushroom ( Pleurotus ostreatus). There is paid more attention to selenium, its form, function and its effect on the human body. The practical part of the thesis includes experimental results arising from the cultivation of oyster mushroom (Pleurotus ostreatus) on substrate, which is enriched with pentahydrate sodium selenite (Na2SeO3.5H2O) in various concentrations. Single samples are determinend by using mass spectrometry with inductively coupled plasma (ICP-MS , inductively coupled plasma mass spectrometry) after decomposition of the sample in a microwave system. The results are according to the individual selenium contents in the dry matter of oyster mushroom (Pleurotus ostreatus) presented in the recommended daily doses (DDD) for possible use as functional foods. Part of this thesis is also to research the influence of the concentration of selenium on the growth of mycelia of oyster mushroom (Pleurotus ostreatus).

The main object of this work is the technology of radio frequency controlled inductively coupled plasma, abbreviated RF-ICP. The specific goal of the work was the application of surface layers of tungsten and analysis of the influence of changes in process conditions on the resulting microstructure and chemical composition of deposited coatings. The monitored conditions were torch power, choice of carrier gas, powder feedrate.

This work deals with the content of iodine in soils, furthermore with obtaining and processing samples from four selected sampling areas, all of which are in the proximity of the Arnoštov settlement in district Prachatice in the foothills of Šumava. The soil samples were obtained from forest, meadow, pasture and fallow soil in 2009 to 2011. The iodine content in the soils was determined by using the spectrophotometric method, which had been optimized for the soil samples. Iodine concentration in lysimeter water was determined by using method inductively coupled plasma - mass spectrometry. The results obtained from each sampling areas were compared with each other and with the results from other areas. Consequently, the iodine concentration results in the soils were compared with the iodine concentration in lysimeter waters. It was found, that the highest iodine content in soils was measured in a sample obtained from Area 1 (meadow), part B in a depth of 16 - 30 cm in June of 2009, namely a content of 8,67 mg of I per kg of dry soil. The lowest content of 1,42 mg of I per kg of soil was found in the area 4 (forest), sample obtained in June of 2010, in the L horizon. By comparing iodine content with iodine concentrations in lysimeter waters, it was concluded that the concentration of iodine in lysimeter waters does not depend on iodine concentrations in soils and that it does not even represent the absolute iodine content in soil, as was determined by comparing the results from Arnoštov with data acquired from Agrovýzkum Rapotín in Jeseníky.

Tato diplomová práce se zabývá problematikou plazmového nanášení bioaktivních keramických povlaků hydroxylapatitu s využitím technologie radio-frekvenčně buzeného indukčně vázaného plazmatu. Cílem bylo optimalizovat proces a nanést kompaktní hydroxylapatitové povlaky na substráty z titanové slitiny Ti6Al4V. Nanesené vzorky byly následně podrobeny analýzám povrchové drsnosti, mikrostruktury a fázového složení. Ze získaných výsledků byly vyvozeny závěry, které byly srovnány s dalšími odbornými pracemi zabývajícími se příbuznou problematikou.

The aim of diploma thesis is occurrence of toxic and essential elements in vegetables and fruit, especially in fruity baby food. The diploma thesis also dedicates processing of vegetables and fruit for production of baby food. Attention is direct to monitoring of baby food quality in the analytical aspects and also to legislative that is in this area. Samples for analysis are prepared using microwave mineralization and ICP-MS for detection. This is described in the experimental part of the diploma thesis.

The aim of this study is to determine the content of selected metals (As, Ba, Cd, Co, Cr, Cu, Mn, Mo, Ni, Se, Sn, Sr, Pb, V, Zn) in samples of leaves and grapes produced by ecologic agriculture and compare to results with leaves and grapes produced by integrated agriculture. The measured results used to assess the impact of agricultural technology on the quality of vines and grapes. The amount of elements was analysed using inductively coupled plasma mass spectrometry after previous digestion of sapmles using microwaves. Concentrations of elements in leaves and grapes from organic and integrated farming did not differ significantly only in the case of copper concentrations were measured higher concentrations in samples from organic farming. This difference is probably caused by different doses of authorized protective equipment based on copper in the organic and integrated farming.

Micas from České středohoří mts. have been studied by X-ray difractometry, ICP-MS and electron microprobe. The measurements of trace elements and REEs revealed very low tendency by normalization of chondrite reservoir and primitive mantle. The micas classifications were determined by Tischendorf (2007) and Rieder (1998) as Fe- or Fe-Ti phlogopites. The abundances of Ti are very high up to 0,46 (a.p.f.u.). X-ray powder diffraction revealed double layered polytype 2M1 with space group C/2c.

Six methods have been used to study micas from České středohoří mts.: X-ray difractometry (transmission and reflection), ICP MS, electron microprobe, Mössbauer spectroscopy and termogravimetry. The measurements of trace elements and REE's revealed very low tendency by normalization on chondrite reservoir and primitive mantle. Micas show high contents of TiO2 (9,47 wt.%) and BaO (up to 2,1 wt.%) in separated grains from rock. The micas classifications were determined by Tischendorf (2007) and Rieder (1998) as Fe-phlogopites. X-ray powder diffraction revealed cell dimensions and a common polytype 1M with space group C2/m. By Mössbauer spectroscopy have been studied the rates of Fe2+ /Fe3+ and they were 1,08 - 1,86 (except rock sample, which were 9:1). Termogravimetrical measurement until 1450řC revealed weight jump from 1120řC to 1270řC.

The aim of this study is to determine the content of toxic and essentials elements in samples of nuts and seeds produced by ecologic agriculture and to compare results with nuts and seeds from conventional agriculture production. These nuts and seeds can be bought in the Czech market (except bio pine nuts, bio pecan nuts and bio pistachios). The amount of elements was analysed using inductively coupled plasma mass spectrometry after previous digestion of samples using microwaves. This study summarizes the main physiological functions of toxic and essentials elements. Results were also compared with another studies. It does not results from all measured amounts of all essential elements, that bio nuts and seeds have higher amounts of these elements; however, all amounts of toxic elements in bio nuts and seeds are lower than in the no-bio ones. For more precise results it would be necessary to measure more samples.

This diploma thesis is focused on the plasma surface treatment of historical glass from the 18th and 19th centuries by low temperature electrical discharges in solutions of sodium chloride and potassium carbonate and finding the most suitable settings of conditions for the surface cleaning. Stainless steel electrode and a specially designed electrode system with wolfram wire in the quartz glass capillary were used for the generation of discharge using an audio frequency power supply. Each line of samples was made from one piece of historical glass that was cut to smaller pieces. All cleaned samples were photographed before and after the cleaning so the possible changes of the cleaned area could be visually compared. Then the samples were analysed by LA-ICP-MS (line scanning of surface), where was analysed the cleaned area of samples, and values were compared to the analysis of the reference sample that was not cleaned. Examined isotopes of elements were selected on the basis of the supposed composition of glass, corrosion products, and soil at the place of discovery. Analyses were standardized by NIST 610. Acquired values were transferred to oxides. The most important oxides (Na2O, MgO, SiO2, P2O5 a K2O) were chosen for deciding the most effective cleaning settings. It was decided that the most effective setting for cleaning was the one where the biggest difference of values between sample and reference occurred. Four series of these solutions were compiled and one parameter was changed for each of them. Solutions and their conductivity, frequency of the power supply, and time of cleaning were chosen as changing values. Three samples of different times of cleaning were cleaned without interruption. The time of cleaning was split into intervals of 30 seconds of cleaning and 1 minute of non-action for another two samples of this series. In this way we were trying to find out if the following surface analysis will be influenced by the diffusion of the particles into the sample, or not. The frequency of power supply was recorded and its dissipated power was calculated for each measurement. Emission spectra of a series of different solution conductivity were measured before cleaning of samples. Measurement of OES was made with the ignition of discharge so the active species of plasma were shown in spectra. These species are probably participating in the cleaning process of glass. Emission spectra were also measured after cleaning to find out if values of active species were changed or unknown spectral lines appeared. These lines should be from dirt and corrosion products that were cleaned from the surface of the glass. It was found out that the most effective cleaning of sample 1 (series where the conductivity of the NaCl solution was changed) was done in a solution of conductivity 900 S/cm. The most effective cleaning of sample 4 and sample 7 (series where the conductivity of the K2CO3 solution was changed) was done in a solution of conductivity 600 S/cm. The most effective cleaning of sample 6 (series where the frequency was changed) was done at frequency = (15200 ± 30) Hz. The most effective cleaning of sample 5 (series of different cleaning times) lasted seven minutes without time delay. The future research it should be appropriate to try a combination of these most effective cleaning settings on the surface of more samples, so the finding of this thesis will be confirmed.