This thesis deals with inductive flowmeters, specifically insertion inductive flowmeters. It examines in detail a blueprint of such flowmeter, consisting of probe, electromagnet, electrodes, exciting module and evaluation of signal. Gauging of a flowmeter designed this way, measuring data, charts, evaluation and interpretation. Consequent measurement in a calibration laboratory to elaborate, evaluate and interpret the results.

This diploma thesis deals with the soldering process in manufacturing instrument transformers. It summarizes the knowledge of soldering process, lead-free alloys and test methods selected solder joint. In the practical part is the analysis the manufacturing process in terms of soldering operations, testing of selected lead-free alloys, which are considered as a replacement for lead-based alloy - now used in the manufacturing process. The conclusion is optimized manufacturing process to reduce operating costs and improve quality.

This thesis deals with heat treatment of pearlitic steel beams with using of induction heating. The aim of this heat treatment is to improve mechanical properties of steel beams. In theoretical part are described pearlitic steels and theory of induction heating. In experimental part of this thesis analysis of current state of technology with its results was made. Numerical model describing current state of technology was assembled. Then this model was used to recommend adjustments in current technology of heat treatment, which leads to enlargement of heat treated depth. Experiments with adjusted parameters were executed on heat treating machine. Analysis of microstructure using LM and EM, measurement of hardness and fractographic analysis were done. The result of adjustments is enlargement of heat treated depth about half compared with current technology.

The paper deals with possibilities of wireless charging and transmission of electric energy using inductive coils. Basic models of air coils are described using CST simulation software. The product consists of a transducer for transmitting coil, two coils with ferromagnetic shield, synchronous rectifier and battery charging circuit. Communication is provided by an 8-bit microcontroller with wireless modules and an ethernet shield for online monitoring. The aim of the thesis is to design a wireless charging station with a power transfer of 40 W with the possibility of online monitoring of the charging state.

This diploma thesis is dedicated to design of highspeed induction motor with power 30 kW, 60 000 rpm. In the beginning of the thesis basic problematic of highspeed motors, used materials and motor types is discussed. The practical part of the thesis concerns design of the motor itself, creating a model in ANSYS Maxwell software, performing several simulations and optimalization of the designed machine. In the last parf of this thesis each simulation is evaluated and the final model of the machine is introduced.

This thesis deals with the design of a power converter for induction heating of iron components designed for a power of at least 2.5 kW. The induction furnace forms a series resonant LC circuit. The thesis contains a description and a design of individual parts of the converter, including wiring diagrams and a design of printed circuit boards. At the end of the work are then described the mechanical construction, the course of recovery and testing the operation of the inverter.

This Diploma thesis deals with the design of induction heating inverter. The main subject is optimalization for blacksmiths. There is described the designing procedure for power components and also designing of control part. Then prototype of 10 kW induction heater was made.

The goal of this master thesis was to study the theory and to realize an induction loop for railway rolling vehicles, to design and manufacture a functioning prototype of electronic amplifier, which carries out all the requirements. This thesis includes detailed information about the induction loop system, its position and performance, following with the design of the amplifier, execution of the design and with the conclusion of measured parameters for the accomplishment of the required parameters.

This Master thesis deals with the design and implementation of the spinning head heating for the fibers manufacturing. The first part of this thesis compares the problems of spinning head heating by means of radiant heat and electromagnetic induction. The next part of the thesis deals with the design and implementation of the selected induction heating of the spinning head together with its partial peripherals. The thesis continues with the design of a controlled air flow through the chambre and design of reheating fibers. In the following part of the thesis, functionality tests and partial measurements are performed on the device. At the end, the measurement results are evaluated and compared.

The first part of thesis is theoretical and it is the introduction into conductometry. It defines the essential terms of this field as well as contact and contactless methods of measurement of fluid conductivity and also the influential parasitic phenomena and possibilities of their elimination. The second part is dealing with design of the contactless transformer conductivity probe. The characteristics of designed probe are verified in the practical part of the thesis. The final part of the thesis is dealing with measurement according to the defined points in the assignment. The characteristics of several contact probes are verified and also the characteristic of the contactless transformer probe, which was implemented according to the design from the second part. Outcomes of these measurements establish the suitable power supply frequencies and currents for all these probes.