The final thesis deals with design of new administrative object. The administrative object is located in edge part of Znojmo city. The building is situated in built-up area, which is used for housing and services. The building is accessible as a detached house on a slightly sloping territory. It is a four-storey house with a cellar, terminated by a warm flat roof, which has three-storey and basement. On the above ground floors are located offices and their associated spaces, staff facilities and toilets. On the third floor there is a terrace for employees’ stay in the summer months. On the third floor there is a collective garage with twenty parking spaces too. The individual floors are accessed via the main staircase and elevator. The building is designed as reinforced precast concreate frame and is based on prefabricated reinforced concrete foundation pads. The infill and internal wall are designed from the Porotherm building system.

It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.

The diploma thesis focuses on project of new building of social house in Mutěnice in Hodonín district in South Moravian region. The project is in accordance with official assignment and with contemporary Czech standards and legislation. The building is placed in inner part of the town close to the town centre. It’s designed on an empty plot owned by town. Object should serve to the town citizens as cultural and social meeting point. The building plan is irregullarly-shaped with maximum dimensions 29,5 X 52,0 m and has two floors. Inside the social house there is a dance hall, restastaurant with kitchen and rooms for cultural and social activities of citizens of Mutěnice. Structural system can be divided into two parts. The part of the building with dance hall consists of feinforced concrete frames combined with infill masonry walls. The other part with restaurant and other rooms is made of masonry walls. The foundations of the building are made of concrete strip foundations and reinforced concrete square footings with grade beams. Bearing walls are made of sand-lime blocks KM Beta. Ceilings are made of prestressed concrete floor slabs Spiroll. Partition walls consist of plasterboard panels. The building is roofed by flat extensive green roof. All external walls are insulated with mineral wool. Doors and windows have wooden frames and triple glazing. As result there’s structurally, operationally and aesthetically functional complex, that will be benefit for the town and its citizens, especially for their cultural and social life.

The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.

This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.