Apresenta-se neste trabalho um estudo sobre o comportamento de estruturas de pórticos preenchidos por painéis de alvenaria submetidos a ações horizontais, considerando a contribuição de alvenaria na rigidez global da estrutura. Este estudo envolveu uma série de ensaios experimentais como protótipos de aço em escala real utilizando-se blocos celular autoclavados; a macromodelagem numérica pelo método dos elementos finitos; a aplicação do conceito da diagonal equivalente; e a realização de um estudo paramétrico, considerando-se pórticos com diferentes relações altura/comprimento, visando à obtenção de recomendações práticas para análise de pórticos preenchidos. Essas recomendações são apresentadas na forma de uma proposta para determinação da carga de ruptura em painéis de pórticos preenchidos com alvenaria, utilizando-se o modelo de bielas e tirantes. Os resultados obtidos com a aplicação desta proposta foram comparados com os dos modelos experimentais e teóricos disponíveis na literatura, comprovando-se a eficiência e praticidade em sua utilização. / This work presents a study of the behavior of masonry infilled frames structures, subjected to horizontal actions, regarding the contribution of the masonry to the structure global stiffening. The study consists of tests, in real size, in steel frames infilled with structural blocks of autoclaved aerated concrete; of the macromodeling using the finite element method; of the application of the concept of equivalnet diagonal struts and of the realization of a parametric study, regarding frames with different ratios height/length, aiming to get design recommendations for the analysis of infilled frames. These recommendations are presented as a proposal for determining the cracking load in panels of infilled frames with masonry. utilizing the strut-and-tie model. The results obtained with this proposal are compared with tests and predictions derived from approximate theoretical analyses, proving the efficiency and practicality in their utilization.

Conselho Nacional de Desenvolvimento Científico e Tecnológico / In this paper, a study on masonry infilled reinforced concrete (RC) frames subjected to service limit state horizontal loads is presented, considering the masonry panel contribution in the stiffness of the structure. The analysis of infilled frames is performed in two ways: using the equivalent diagonal strut concept, called here as macromodelling and the finite element method (FEM) for the micromodelling. Due to simplicity, equivalent strut models are really attractive for the inclusion of masonry panels in structural models of buildings frames. However, formulations available in the literature provide substantially distinct values for determining the axial rigidity of the equivalent strut, and disregarding some important parameters of the structural behavior of the infilled frame. In the FEM analysis, numerical simulations of infilled RC frames are done, with and without openings, with different spans, stiffness of the columns and masonry properties, using finite elements type shell in the modeling, in addition to the consideration of the contact frame-masonry. The simulations results allow the assessment of the limitations of the existing formulations for determining the width of the diagonal strut. In infilled frames with openings of doors and windows, is evaluated how the size and position of the aperture affects the stiffness of the structure. Finally, the maximum stresses (tensile, compression and shear) of all models are evaluated and compared with their respective resistant stresses in order to determine the possibility of cracking of the masonry panels of frames subjected to service limit state actions. / Neste trabalho é apresentado um estudo sobre pórticos de concreto armado preenchidos com alvenaria submetidos a ações horizontais de Estado Limite de Serviço (ELS), considerando a contribuição do painel de preenchimento na rigidez da estrutura. A análise dos pórticos preenchidos é realizada de duas maneiras: empregando-se o conceito da diagonal equivalente, na denominada macromodelagem e o método dos elementos finitos (MEF) para a micromodelagem simplificada. Em razão da simplicidade, os modelos com barras diagonais equivalentes são bastante atrativos para a inclusão de painéis de alvenaria nos modelos estruturais de pórticos de edifícios. Entretanto, as formulações disponíveis na bibliografia especializada fornecem valores sensivelmente distintos para a determinação da rigidez axial da barra equivalente, além de desconsiderarem alguns parâmetros importantes do comportamento estrutural do conjunto pórtico-alvenaria. Na análise através do MEF são realizadas simulações numéricas de pórticos de concreto preenchidos com alvenaria, com e sem aberturas, com diferentes vãos, rigidez de pilares e propriedades da alvenaria, empregando-se elementos bidimensionais na modelagem, além da consideração do contato pórtico-parede. Os resultados dessas simulações permitem a avaliação das limitações das formulações existentes para a determinação da largura da barra equivalente. No caso de pórticos preenchidos com aberturas, é avaliado de que forma o tamanho e a posição da abertura afeta a rigidez da estrutura. Por fim, as máximas tensões solicitantes (tração, compressão e cisalhamento) de todos os modelos são avaliadas, e comparadas com as respectivas tensões resistentes, a fim de determinar a possibilidade de fissuração dos painéis de preenchimento de pórticos submetidos a ações de ELS.

Made available in DSpace on 2016-06-02T20:09:16Z (GMT). No. of bitstreams: 1 4457.pdf: 18463450 bytes, checksum: c0a25a178fa3c9a6561abc7109472ddc (MD5) Previous issue date: 2012-03-30 / Financiadora de Estudos e Projetos / This work proposes to develop a study about frame structure behaviour filled with masonry panel, for the purposes of building bracing. It aims to consider the hardening of this filling masonry in the frame which deals with the horizontal loadings analysis such as wind strength. The work starts with the historical development, depicting the fact that who started this study. Then, variables which influence the frame rigidity are shown, like: wedging, the kind of link between panel- frame, panel openings, codes and design specification. These topics describe theoretical and experimental studies that have already been carried out about the theme and the main approaches considered by the researchers. For the purpose of checking the structure stiffening increase some case study were held. The first one comprehends a simple frame, theoretical, with data and results obtained from specialized literature. The second one compares a steal frame tested on a laboratory, with a computer program modeled frame, using the same features as the real stuff. Then, the portics were analysed with different filled floors. For doing so, different available calculation methods were applied, which employ equivalent diagonal concept to consider the masonry filling contribution as a structural constituent. Bearing in mind to verify the stiffening increase when the filling masonry are considered, a real building was modeled, in this particular case Helena Building, it has 22 floors, built in São Paulo using reinforced concrete, either considering or not the filling masonry. As the research bottom line, this text allows an updating about the possibility of including the filling masonry in building projects, an evaluation of the stiffening increase that the masonry might cause, an analysis to verify the compressed diagonal model and finally it shows design criteria. / O presente trabalho propõe realizar um estudo da arte sobre o comportamento de estruturas aporticadas preenchidas com painéis de alvenaria, para fim de contraventamento de edificações. Visa considerar o enrijecimento dessa alvenaria de preenchimento no pórtico para análise de ações horizontais, como a força do vento. O trabalho inicia-se com o desenvolvimento histórico, descrevendo o fato que originou o estudo. Em seguida, apresenta variáveis que influenciam na rigidez do pórtico, como: encunhamento, tipo de ligação entre pórtico-painel, abertura em painéis, normas e considerações para projeto. Esses tópicos descrevem estudos teóricos e experimentais já realizadas sobre o tema e os enfoques mais relevantes considerados pelos pesquisadores. A fim de verificar o aumento de rigidez da estrutura foram realizados alguns estudos de caso. O primeiro trata-se de um pórtico simples, teórico, com dados e resultados obtidos na literatura especializada. A segunda análise compara-se um pórtico metálico ensaiado em laboratório, com um pórtico modelado em programa computacional, adotando as mesmas características do real. Em seguida, analisam-se teoricamente pórticos com diferentes pavimentos preenchidos. Para isso, adotaram diferentes métodos de cálculo disponíveis, que empregam o conceito de diagonal equivalente para considerar a contribuição do enchimento de alvenaria como elemento estrutural. Com propósito de comprovar o acréscimo de rigidez quando for considerada a alvenaria no preenchimento, foi modelado um edifício real, o edifício Helena, de 22 pavimentos, executado em concreto armado na cidade de São Paulo, considerando ou não a alvenaria de preenchimento. Como resultado da pesquisa, este texto permite uma atualização sobre a possibilidade de inclusão da alvenaria de enchimento no projeto de edificações, avaliar o aumento de rigidez que a alvenaria pode proporcionar, averiguar o modelo de diagonais comprimidas e, finalmente, indicar critérios para projeto.

<p>Masonry infills historically have increased in-plane stiffness and reduced drift demands of reinforced concrete frames. An inherent risk remains during intense ground motions that unreinforced masonry infills can develop shear cracks, fail out-of-plane, or lead to the formation of captive-column conditions. This study explored the use of full-bay, plywood panel infills in non-ductile reinforced concrete frames as a novel seismic retrofit. Wood infills were constructed from layers of APA 3/4” Rated Sheathing plywood panels. Infills were tested using two single-bay, single-story concrete frames at 1/3 scale, with initial periods between 0.1 and 0.3 seconds once infilled. External post-tensioning was provided to the columns during all series to prevent column shear failure and doubled as dowel connections between the concrete frame and wood panel infill. Test series were performed on a uniaxial earthquake simulator with the frame bay parallel to the direction of ground motion. Wood infills were approximately 0.36∗𝑏, 0.18∗𝑏, and 0.09∗𝑏 thick, where b is the column width. Multi-layer infills were screw-laminated via a 6” square grid. Infills were tested in previously damaged and nominally pristine frames.</p> <p>During similar ground motions, masonry infills reduced the effective period of the pristine bare frame by approximately 50%. In nominally pristine frames, one-panel plywood infills reduced the bare frame period by a maximum of 50%, and two-panel infills by 60%. One and two-panel wood infills reduced drift demands in comparison to the pristine bare frame by a factor of 1√2∗𝑛 in previously damaged frames and by 12∗𝑛 in nominally pristine frame, where n is the number of panels of plywood across the infill thickness. There was no extra reduction in drift demands resulting from increasing the wood infill thickness beyond two panels. One-panel wood infills failed via out-of-plane buckling causing splitting at a drift demand of approximately 1.5%.</p> <p>The results of this study confirm that wood panel infill retrofits are structurally viable alternatives to stiffen non-ductile reinforced concrete frames. Plywood panel infills reduced drift demands more efficiently per unit thickness and unit weight than masonry infills; the resilience and ease of construction of wood infills suggest expanded use should be explored. Experimental study of full-scale wood infills is needed before this retrofit method could become field deployable.</p>

Στα πλαίσια της παρούσας διατριβής διερευνήθηκε – τόσο σε πειραματικό όσο και σε αναλυτικό επίπεδο – η ενίσχυση των τοιχοπληρώσεων σε πλαίσια ΟΣ με μια νέα τεχνική που κάνει χρήση ενός προηγμένου σύνθετου υλικού γνωστού ως «Ινοπλέγματα σε Ανόργανη Μήτρα (ΙΑΜ)». Η τεχνική αυτή αποτελεί εναλλακτική πρόταση ενίσχυσης έναντι άλλων, συμβατικών και μη, τεχνικών και χαρακτηρίζεται από την ευκολία εφαρμογής της, τις εξαιρετικές ιδιότητες του υλικού καθώς και τα συγκριτικά πλεονεκτήματα του τελευταίου έναντι ανταγωνιστικών υλικών για τον ίδιο σκοπό, όπως τα ινοπλισμένα πολυμερή. Για τη διερεύνηση της αποδοτικότητας της νέας τεχνικής σχεδιάσθηκε και εκτελέστηκε ένα πολύπλευρο πειραματικό πρόγραμμα. Αρχικά αναπτύχθηκε ένα νέου είδους αγκύριο με βάση τα πλέγματα ινών, το οποίο δοκιμάσθηκε ως μέσο σύνδεσης μεταξύ στοιχείων τοιχοποιίας και σκυροδέματος. Όπως έδειξαν πειραματικές δοκιμές για τη σύνδεση τοιχοποιίας-στοιχείων σκυροδέματος, τα αγκύρια που αναπτύχθηκαν αποδείχθηκαν επαρκώς αποτελεσματικά ώστε να χρησιμοποιηθούν στο δεύτερο - και κυρίως μέρος - του πειραματικού προγράμματος, το οποίο περιελάμβανε δοκιμές σε τριώροφα τοιχοπληρωμένα πλαίσια. Στα πλαίσια του δεύτερου μέρους του πειραματικού προγράμματος κατασκευάσθηκαν και δοκιμάσθηκαν, σε εντός επιπέδου ανακυκλιζόμενη φόρτιση, δύο τοιχοπληρωμένα πλαίσια μεγάλης κλίμακας (2/3). Το ένα εξ αυτών δοκιμάσθηκε χωρίς να ενισχυθεί και απετέλεσε το δοκίμιο αναφοράς, ενώ το άλλο δοκιμάσθηκε μετά την ενίσχυσή του με μανδύες ΙΑΜ και την υλοποίηση αγκύρωσης/σύνδεσης της τοιχοπλήρωσης με τα περιμετρικά μέλη του πλαισίου. Επιπλέον των δοκιμών κυκλικής φόρτισης, πραγματοποιήθηκαν και δοκιμές ελεύθερης ταλάντωσης για τη μελέτη της επιρροής των τοιχοπληρώσεων – ενισχυμένων και μη – στα δυναμικά χαρακτηριστικά του πλαισίου. Τα αποτελέσματα των δοκιμών στα τριώροφα τοιχοπληρωμένα πλαίσια κατέδειξαν τη συμβολή της νέας τεχνικής στη βελτίωση της απόκρισης του πλαισίου με αύξηση της αντοχής του σε πλευρική φόρτιση, της ικανότητας παραμόρφωσής του και της ικανότητας ανάλωσης ενέργειας. Το τρίτο μέρος της έρευνας επικεντρώθηκε στην ανάπτυξη αναλυτικού προσομοιώματος, το οποίο βασίσθηκε στη χρήση γραμμικών στοιχείων θλιπτήρα-ελκυστήρα για την προσομοίωση της απόκρισης των τοιχοπληρώσεων (ενισχυμένων και μη). Για τον υπολογισμό των ιδιοτήτων του θλιπτήρα έγινε χρήση αναλυτικών σχέσεων από τη βιβλιογραφία, ενώ για τον υπολογισμό των ιδιοτήτων του ελκυστήρα αναπτύχθηκε κατάλληλη αναλυτική μεθοδολογία. Για τον προσδιορισμό συγκεκριμένων παραμέτρων που απαιτούνταν για το αναλυτικό προσομοίωμα της ενισχυμένης τοιχοπλήρωσης, διεξήχθησαν πρόσθετες δοκιμές και συγκεκριμένα, δοκιμές εφελκυσμού ΙΑΜ, δοκιμές κεντρικής θλίψης τοιχοσωμάτων – ενισχυμένων και μη – και δοκιμές διαγώνιας θλίψης τοιχοσωμάτων – ενισχυμένων και μη. Οι πειραματικά προσδιορισμένες ιδιότητες του υλικού της ενίσχυσης (όπως η εφελκυστική του αντοχή και το μέτρο ελαστικότητας) καθώς και οι ιδιότητες των τοιχοσωμάτων (όπως η θλιπτική αντοχή, η διατμητική τάση ρηγμάτωσης, το μέτρο ελαστικότητας και το μέτρο διάτμησης) χρησιμοποιήθηκαν ως τιμές των αντίστοιχων παραμέτρων του αναλυτικού προσομοιώματος. Τα παραπάνω στοιχεία ενσωματώθηκαν σε λογισμικό ανοικτού κώδικα για τη μη-γραμμική ανάλυση κατασκευών, στο οποίο τα μέλη του πλαισιακού φορέα (δοκοί και υποστυλώματα) προσομοιώνονται με γραμμικά στοιχεία συγκεντρωμένης ανελαστικότητας στα άκρα τους. Για την προσομοίωση των δύο πειραματικών δοκιμίων (μη ενισχυμένο και ενισχυμένο τοιχοπληρωμένο τριώροφο πλαίσιο) πραγματοποιήθηκαν σειρές αναλύσεων με στόχο την βαθμονόμηση-επαλήθευση του αναλυτικού προσομοιώματος. Βάσει των αναλύσεων προέκυψε ότι το αναλυτικό προσομοίωμα μπορεί να αναπαράγει με καλή ακρίβεια την απόκριση των πειραματικών δοκιμίων. Η διατριβή χωρίζεται σε επτά κεφάλαια. Στο Κεφάλαιο 1 πραγματοποιείται η εισαγωγή στο αντικείμενο της εργασίας και στο πρόβλημα το οποίο επιχειρεί να αντιμετωπίσει. Στο πλαίσιο της περιγραφής του προβλήματος παρουσιάζονται συνοπτικά οι υφιστάμενες τεχνικές αντιμετώπισης, οι οποίες είτε εφαρμόζονται στο πεδίο είτε έχουν διερευνηθεί πειραματικά. Στο Κεφάλαιο 2 περιγράφεται συνοπτικά το υλικό το οποίο χρησιμοποιείται στη νέα τεχνική που αναπτύσσεται στην παρούσα εργασία, δηλαδή τα «Ινοπλέγματα σε Ανόργανη Μήτρα (ΙΑΜ)», μαζί με μία σύντομη ανασκόπηση των ερευνητικών εργασιών της διεθνούς βιβλιογραφίας που κάνουν χρήση των ΙΑΜ σε εφαρμογές ενισχύσεων στοιχείων οπλισμένου σκυροδέματος (ΟΣ) και τοιχοποιίας. Το Κεφάλαιο 3 αποτελεί ένα μικρό κεφάλαιο στο οποίο περιγράφεται εποπτικά το σύνολο του πειραματικού προγράμματος το οποίο χωρίζεται σε τρία μέρη. Το πρώτο μέρος παρουσιάζεται στο Κεφάλαιο 4 και διερευνά τη σύνδεση μεταξύ μελών ΟΣ και τοιχοποιίας μέσω ΙΑΜ και ειδικά διαμορφούμενων αγκυρίων ινών. Στο Κεφάλαιο 5, το οποίο αποτελεί τον κορμό της παρούσας εργασίας, παρουσιάζεται το δεύτερο μέρος του πειραματικού προγράμματος που αποτελείται από δοκιμές σε τριώροφα τοιχοπληρωμένα πλαίσια μεγάλης κλίμακας. Η περιγραφή του τρίτου μέρους του πειραματικού προγράμματος, το οποίο περιλαμβάνει συμπληρωματικές δοκιμές για την υποστήριξη των αναλύσεων, ενσωματώνεται στο Κεφάλαιο 6 μαζί με την περιγραφή του αναλυτικού προσομοιώματος και των αριθμητικών αναλύσεων. Τέλος, στο Κεφάλαιο 7 πραγματοποιείται η σύνοψη της εργασίας και η παράθεση των συμπερασμάτων που προκύπτουν από αυτή. / The subject of the present thesis is the experimental and analytical investigation of strengthening masonry infilled reinforced concrete (RC) frames with Textile-Reinforced Mortar (TRM). The proposed strengthening technique comprises the application of externally applied TRM layers on the infills surfaces and the connection to the surrounding RC frame members. TRM is a composite material which comprise fibers in form of textiles in combination with inorganic matrices (such as cement based mortars). The experimental campaign includes tests on small-scale specimens (i.e. masonry subassemblies) as well as on large-scale specimens (3-story masonry infilled RC frames). In the framework of the first part of the experimental campaign different methods of masonry infill-concrete connection are examined by developing and testing textile-based anchors. The parameters under investigation include mainly the type of boundary conditions at the masonry-concrete interface, the geometry and fiber volume of anchors and the type and number of layers of the textile. It is concluded that the anchors developed in this study enable the transfer of substantial tensile forces between masonry and concrete. The second part of the experimental campaign includes the application of TRM on nearly full-scale, as-built and retrofitted, 3-storey frames, subjected to in-plane cyclic loading. The results of testing a 2:3 scale, as-built frame representing typical structures with non-seismic design and detailing characteristics and of a companion frame retrofitted via TRM jacketing are compared in terms of the efficiency of the proposed technique to enhance the strength and deformation characteristics. Additionally, in order to determine the dynamic characteristics of the frames free vibration tests are performed in three different stages of their construction (bare frame; infilled-frame; retrofitted-infilled frame). It is concluded that the proposed strengthening technique is very effective in increasing the lateral strength, the deformation capacity, the initial elastic stiffness as well as the dissipating energy of the infilled frames. The last part of the thesis presents an analytical approach for modeling the behavior of TRM-retrofitted infilled RC frames under seismic loading. The model falls into the discrete diagonal-element type and is based on the use of a single-strut and single-tie elements to represent the infill panel and it builds on the results of the experimental campaign. The model is implemented in a nonlinear finite-element code, with the parameters of the diagonal elements being determined from a series of tests on TRM coupons and masonry specimens. The results of the numerical analyses are compared with the experimental data and is concluded that the model adequately accounts for the TRM-strengthening contribution to the global response of masonry-infilled frames.

[EN] A simplified analytical method ("FAST") for the estimation of large-scale vulnerability of Reinforced Concrete (RC) Moment Resisting Frames with masonry infills is proposed and subsequently tested by using real damage scenario caused by the 2011 Lorca earthquake as a benchmark. FAST is a spectral-based approach that allows predicting the average non-structural Damage State expected for each class of building (defined by number of storeys, age of construction, infills ratio in plan and location) for a given demand level. It accounts for non-uniformity of infills in elevation, i.e. a reduction of infills ratio of the ground floor. FAST is based on: (i) the definition of approximated capacity curves of the infilled building, assuming that the RC frame is designed according to the corresponding seismic code; and on (ii) the assumption of "a priori" deformed shapes in accordance with the attainment of each non-structural damage state at 1st storey, estimated through experimental and numerical correlations. Two versions of FAST are proposed: a "simplified" approach aimed at the evaluation of uniformly infilled frames; and a "generalised" version which can account for any intermediate situation between uniformly infilled frames and pilotis frames (i.e. without infills at 1st storey). Also, some extensions of the method are highlighted. Aimed at testing FAST, the real damage scenario after the earthquake of Lorca (2011) is used as a benchmark, despite its impulsivity and directivity. In order to define the specific input parameters for the case study, information regarding ground motion, post-earthquake damage scenario and also building design practice must be collected. Hence, a detailed review of historical Spanish seismic codes and a critical analysis of current Spanish seismic code NCSE-02 in comparison with current reference performance-based codes such as Eurocode 8 are provided. Special emphasis is placed on provisions which can prevent a proper capacity design and that, in turn, can cause brittle failures or favour the interaction with infills. Also, the prescription of lower behaviour factor for wide-beam frames with respect to deep-beam frames -which is not present in most codes¿ is discussed; outcomes of several case studies suggest that such prescription is obsolete. Finally, FAST is applied to Lorca earthquake and predicted damage scenarios are obtained, considering different assumptions for input values. Results show proper agreement between predicted and real damages. Structural collapses were rarely observed, even though the PGA was three times higher than the typical acceleration of design, so FAST proves that masonry infills provided additional strength to RC frames. / [ES] Se propone un método analítico simplificado ("FAST") para la estimación de la vulnerabilidad a gran escala de edificios porticados de hormigón armado con tabiquería de fábrica, posteriormente testeado mediante la adopción del escenario de daño real correspondiente al terremoto de Lorca de 2011 como patrón de comparación. FAST es un procedimiento espectral que permite predecir el nivel de daño no estructural medio esperado para cada clase de edificio (definido por su número de plantas, año de construcción, densidad de tabiquería en planta y localización geográfica), considerando un nivel de demanda dado. El método tiene en cuenta la irregularidad de la tabiquería en alzado, es decir, la posible reducción relativa de tabiquería en planta baja. FAST se basa en: (i) la definición de curvas de capacidad aproximadas para los edificios tabicados, asumiendo que la estructura de HA se ha proyectado según la norma sísmica correspondiente en cada caso; y en (ii) la asunción de deformadas "apriorísticas" coherentes con cada grado de daño (suponiendo que éste se alcanza siempre en planta baja), estimadas a través de correlaciones experimentales y numéricas. Se proponen dos versiones de FAST: una "simplificada" para la evaluación de edificios uniformemente tabicados en altura, y otra "generalizada", que es capaz de tener en cuenta cualquier situación intermedia entre el prototipo uniformemente tabicado y el de planta baja diáfana. Además, se proponen ciertas extensiones al método. A fin de validar FAST, se elige el escenario de daño real correspondiente al terremoto de Lorca (2011) como patrón de comparación, a pesar de su impulsividad y directividad. Para definir los parámetros de input correspondientes al caso de estudio, es necesario recopilar previamente la información concerniente a la señal sísmica, el escenario de daño y las características del parque construido. Por tanto, se lleva a cabo una revisión exhaustiva de las normas sísmicas históricas en España y un análisis crítico de la norma sísmica española actual NCSE-02 en comparación con otras normas actuales de referencia basadas en el desempeño, como el Eurocódigo 8, haciendo énfasis en las provisiones que no garantizan el diseño por capacidad y que por tanto pueden provocar mecanismos frágiles o favorecer la excesiva influencia de la tabiquería. Además, se discute sobre la restricción del coeficiente de ductilidad en estructuras de vigas planas, cuestión que no se refleja en otras normas. Los resultados obtenidos mediante análisis de casos de estudio muestran que dicha prescripción resulta obsoleta para normas actuales. Finalmente, FAST se aplica al caso del terremoto de Lorca, obteniéndose predicciones de daño medio para diferentes asunciones. Los resultados muestran una coincidencia aceptable entre la predicción y los daños reales. FAST confirma que la causa principal de la práctica ausencia de colapsos (ante un terremoto con PGA triple que la típica de proyecto) hay que buscarla en la contribución estructural de la tabiquería de fábrica. / [CA] Es proposa un mètode analític simplificat ("FAST") per a l'estimació de la vulnerabilitat a gran escala d'edificis porticats de formigó armat amb envans de fàbrica. Posteriorment, el mètode ha estat testejat mitjançant l'adopció de l'escenari de dany real corresponent al terratrèmol de Lorca de 2011 com a patró de comparació. FAST és un procediment espectral que permet predir el nivell de dany no estructural mitjà esperat per a cada classe d'edifici (definit pel seu nombre de plantes, any de construcció, densitat d'envans en planta i localització geogràfica), considerant un determinat nivell de demanda. El mètode té en compte la irregularitat de la distribució de envans al llarg de les diferents plantes del edifici. Es a dir, es pot tenir en compte que, freqüentment, hi ha una menor quantitat de d'envans a la planta baixa. FAST es fonamenta en: (i) la definició de corbes de capacitat aproximades que tenen en compte no sols la estructura del edifici sinó també els envans i assumint que l'estructura de HA s'ha projectat segons la norma sísmica corresponent en cada cas; (ii) l'assumpció de deformades "apriorístiques" coherents amb cada grau de dany (suposant que aquest es dona sempre a la planta baixa) que han estat estimades a través de correlacions experimentals i numèriques. Es proposen dues versions de FAST: una "simplificada" per a l'avaluació d'edificis amb envans uniformement repartits per totes les plantes, i una altra "generalitzada", que és capaç de tenir en compte qualsevol situació intermèdia entre el prototip uniformement paredat i el de planta baixa diàfana. A més, es proposen certes extensions al mètode. Per tal de validar FAST, es tria l'escenari de dany real corresponent al terratrèmol de Lorca (2011) com a patró de comparació, malgrat la seva impulsivitat i directivitat. Per definir els paràmetres de entrada corresponents al cas d'estudi, cal recopilar prèviament la informació concernent al senyal sísmica, l'escenari de dany i les característiques del parc construït. Per tant, es porta a terme una revisió exhaustiva de les normes sísmiques històriques a Espanya i una anàlisi crítica de la norma sísmica espanyola actual (NCSE-02) comparant-la amb altres normes actuals de referència, com l'Eurocodi 8, fonamentat en el concepte d'acompliment. També es fa èmfasi a les provisions que no garanteixen el disseny per capacitat i que, per tant, poden provocar mecanismes de col·lapse fràgils o afavorir la interacció de la estructura amb els envans. A més, es discuteix sobre la restricció del coeficient de ductilitat de les estructures de bigues planes ja que es una qüestió que no aborden la majoria de les normes. Els resultats obtinguts mitjançant l'anàlisi de casos d'estudi mostren que aquesta restricció resulta obsoleta a les normes actuals. Finalment, FAST s'aplica al cas del terratrèmol de Lorca, obtenint prediccions de dany mitjà per a diferents combinacions del paràmetres de entrada. Els resultats mostren una coincidència acceptable entre la predicció i els danys reals. FAST confirma que la causa principal de la pràctica absència de col·lapses (davant un terratrèmol amb PGA triple que la típica de projecte) cal buscar-la en la contribució estructural dels envans. / Gómez Martínez, F. (2015). FAST simplified vulnerability approach for seismic assessment of infilled RC MRF buildings and its application to the 2011 Lorca (Spain) earthquake [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/54780 / TESIS / Premios Extraordinarios de tesis doctorales