1 |
Comparison Of Various Svc Topologies And Control Strategies For Heavy IndustryYalvac, Erdinc 01 September 2009 (has links) (PDF)
Power quality issues of heavy industry, especially iron and steel plants, require special solutions. High levels of harmonic currents, unbalanced operation and light flicker arising from rapid fluctuations of active and reactive power demands are common problems in these plants. Almost all of these plants in Turkey are equipped with modern Static Var Compensator (SVC) Systems. In this thesis, alternative control strategies and flicker compensation system topologies are investigated and evaluated based on real-time field data and compared with the existing SVC systems. It is found out that the currently installed SVCs are not fully capable of solving the power quality issues of EAFs. This thesis is dedicated to detailed analysis, design, control, and simulation of TCR based SVC using instantaneous power theory, Three Phase Bridge Connected STATCOM and Delta Connected STATCOM. These 3 different types of compensators are modelled based on the similar installed capacities and their contribution to voltage quality and reactive power compensation are compared.
|
2 |
La commande hybride prédictive d’un convertisseur quatre bras / Predictive Hybrid Control on 3-Phase 4-Wire Power ConvertersRachmildha, Tri Desmana 01 October 2009 (has links)
Dans une large variété d'applications industrielles, il existe une demande croissante pour améliorer la qualité de l'énergie fournie par les systèmes électriques. En plus de la fiabilité et de la disponibilité d'énergie électrique, la qualité de la puissance fournie devient maintenant une question importante. Parmi les causes de la pauvre qualité de puissance, les harmoniques sont considérés comme la raison qui contribue à la majorité de pannes de courant. Beaucoup d'efforts ont été développés pour résoudre le problème des perturbations harmoniques comme, par exemple, installer des dispositifs spéciaux tels que les filtres actifs. Ce travail de thèse traite le développement d’une commande directe de puissance utilisant l'approche prédictive hybride. La commande hybride considère chaque vecteur de tension du convertisseur comme une entité discrète qui sera appliquée pour commander un système linéaire continu. Un critère pour calculer le vecteur optimal de tension à appliquer sera établi à partir d’un modèle prédictif. Le vecteur optimal de tension à appliquer pour chaque période de commutation, et le correspondant temps d'application seront utilisés pour approcher la valeur réelle des variables d'état du système au point de référence désiré. Deux théories de puissance instantanées seront employées, p-q et p-q-r, pour une application de filtre active parallèle de puissance dans un système triphasé de 4 fils. Ces théories instantanées de puissance ont été développées pour être appliquées aux systèmes non équilibrés utilisant les variables de puissance pour obtenir les courants qui devraient être injectés par le filtre actif. Le filtre actif produira la puissance réactive demandée par la charge et compensera la composante d'ondulation de la puissance active de sorte que la source livre seulement la puissance active constante. / In a wide variety of industrial applications, an increasing demand exists to improve the quality of the energy provided by electrical systems. Besides the reliability and availability of electric power, the power quality is now becoming an important issue. Among the causes of the poor power quality, the harmonics are included as the reason which contributes the majority of power failures. Many efforts have been developed to solve the harmonics problem as, for instance, to install special devices such as active filters. This research work deals with the development of direct power control using the hybrid predictive control approach. The hybrid control considers each voltage vector of the converter as a discrete entity which will be applied to control a continuous linear system. One criterion to calculate the optimal voltage vector to apply will be established for the predictive control model. The optimal voltage vector to apply for each switching period, and the corresponding application time will be used to approach the actual value of the state variables of the system to the desired reference point. Two instantaneous power theories will be used, i.e. pq0 and pqr instantaneous power theory for a shunt active power filter application implemented in 3-phase 4-wire system. These instantaneous power theories have been developed to be applied to unbalanced systems using the power variables to obtain the currents that should be injected from active filters. The active filter will produce the required reactive power for the load and compensate the ripple component of active power so that the source only delivers constant active power.
|
3 |
Algumas Contribuições para Algoritmos de Controle de Filtros Ativos e Híbridos Conectados em Paralelo com Redes Elétricas Trifásicas a 3 ou a 4 Fios. / Some Contributions for control algorithms of shunt active and hybrid power filters in 3 or 4-wire power grids.Cleiton Magalhães Freitas 16 July 2014 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta contribuições para algoritmos de controle utilizados em filtros ativos e híbridos conectados em redes elétricas trifásicas a 3 ou a 4 fios. Em relação aos algoritmos de controle para filtros ativos, a contribuição consiste em estender o conceito da filtragem harmônica seletiva para compensação de correntes harmônicas e desequilibradas em uma rede trifásica a 4 fios. Esses algoritmos derivam dos conceitos utilizados na teoria da potência instantânea (teoria pq), em conjunto com um circuito de sincronismo PLL. É importante ressaltar que estes algoritmos não utilizam as correntes consumidas pelas cargas, ou seja, apenas as tensões no ponto da rede onde o filtro está conectado são utilizadas para determinação das correntes harmônicas de referência.
Apenas as correntes na saída do conversor são utilizadas como realimentação do controle PWM. Estes algoritmos também foram utilizados no filtro híbrido para compensação de correntes harmônicas em uma rede trifásica a 3 fios. Por fim foi feito uma alteração nesses
algoritmos de controle que permite eliminar as correntes utilizadas na realimentação do controle PWM. Resultados de simulação são apresentados com objetivo de observar o comportamento desses algoritmos tanto no filtro ativo quanto no híbrido nas condições
mencionadas. / This work presents some contributions involving control algorithms for active and
hybrid filters connected in 3 or 4-wire three-phase electrical grids. In relation to the control
algorithms for active filters, the contribution results from the extension involving the
concepts of selective harmonic filtering to compensate unbalanced and harmonic currents
in a 4-wire three-phase electrical grid. These algorithms derive from the instantaneous
power theory (pq theory) together with a synchronizing PLL-circuit. It is important to
mention that these algorithm do not use the currents consumed by the loads, i.e, only
the voltages at the point common coupling (PCC) are used to determine the reference
harmonic currents. Only the output converter currents were used as a feedback to the
PWM control. These algorithms were also employed in a hybrid filter to compensate
harmonic currents in a 3-wire three-phase electrical grid. Finally, some improvements on
these control algorithms were done, such that the output converter currents used as a
feedback of the PWM control were eliminated. Simulations results were provided in order
to analyze the behavior of the active and hybrid filters in the aforementioned conditions.
|
4 |
Algumas Contribuições para Algoritmos de Controle de Filtros Ativos e Híbridos Conectados em Paralelo com Redes Elétricas Trifásicas a 3 ou a 4 Fios. / Some Contributions for control algorithms of shunt active and hybrid power filters in 3 or 4-wire power grids.Cleiton Magalhães Freitas 16 July 2014 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta contribuições para algoritmos de controle utilizados em filtros ativos e híbridos conectados em redes elétricas trifásicas a 3 ou a 4 fios. Em relação aos algoritmos de controle para filtros ativos, a contribuição consiste em estender o conceito da filtragem harmônica seletiva para compensação de correntes harmônicas e desequilibradas em uma rede trifásica a 4 fios. Esses algoritmos derivam dos conceitos utilizados na teoria da potência instantânea (teoria pq), em conjunto com um circuito de sincronismo PLL. É importante ressaltar que estes algoritmos não utilizam as correntes consumidas pelas cargas, ou seja, apenas as tensões no ponto da rede onde o filtro está conectado são utilizadas para determinação das correntes harmônicas de referência.
Apenas as correntes na saída do conversor são utilizadas como realimentação do controle PWM. Estes algoritmos também foram utilizados no filtro híbrido para compensação de correntes harmônicas em uma rede trifásica a 3 fios. Por fim foi feito uma alteração nesses
algoritmos de controle que permite eliminar as correntes utilizadas na realimentação do controle PWM. Resultados de simulação são apresentados com objetivo de observar o comportamento desses algoritmos tanto no filtro ativo quanto no híbrido nas condições
mencionadas. / This work presents some contributions involving control algorithms for active and
hybrid filters connected in 3 or 4-wire three-phase electrical grids. In relation to the control
algorithms for active filters, the contribution results from the extension involving the
concepts of selective harmonic filtering to compensate unbalanced and harmonic currents
in a 4-wire three-phase electrical grid. These algorithms derive from the instantaneous
power theory (pq theory) together with a synchronizing PLL-circuit. It is important to
mention that these algorithm do not use the currents consumed by the loads, i.e, only
the voltages at the point common coupling (PCC) are used to determine the reference
harmonic currents. Only the output converter currents were used as a feedback to the
PWM control. These algorithms were also employed in a hybrid filter to compensate
harmonic currents in a 3-wire three-phase electrical grid. Finally, some improvements on
these control algorithms were done, such that the output converter currents used as a
feedback of the PWM control were eliminated. Simulations results were provided in order
to analyze the behavior of the active and hybrid filters in the aforementioned conditions.
|
5 |
Optimization of rectifiers for aviation regarding power density and reliability / Optimierung von Gleichrichtern für die Luftfahrt unter Berücksichtigung von Leistungsdichte und ZuverlässigkeitLiebig, Sebastian 01 June 2015 (has links) (PDF)
The intentions of the so-called "More Electrical Aircraft" (MEA) are higher efficiency and lower weight. A main topic here is the application of electrical instead of hydraulical, pneumatical and mechanical systems. The necessary power electronic devices have intermediate DC-links, which are typically supplied by a three-phase system with active B6 and passive B12 rectifiers. A possible alternative is the B6 diode bridge in combination with an active power filter (APF). Due to the parallel arrangement, the APF offers a higher power density and is able to compensate for harmonics from several devices. The use of the diode bridge rectifier alone is not permitted due to the highly distorted phase current.
The following investigations are dealing with the development of an active power filter for a three-phase supply with variable frequency from 360 to 800 Hz. All relevant components such as inductors, EMC-filters, power modules and DC-link capacitor are designed. A particular focus is put on the customized power module with SiC-MOSFETs and SiC-diodes, which is characterized electrically and thermally. The maximum supply frequency slope has a value of 50 Hz/ms, which requires a high dynamic and robustness on the control algorithm. Furthermore, the content of 5th and 7th harmonics must be reduced to less than 2 %, which demands a high accuracy. To cope with both requirements, a two-stage filter algorithm is developed and implemented in two independent signal processors. Simulations and laboratory experiments confirm the performance and robustness of the control algorithm.
This work comprehensively presents the design of aerospace rectifiers. The results were published in conferences and patents. / Hauptziele des sogenannten "More Electrical Aircraft" (MEA) sind Effizienzerhöhung und Gewichtseinsparung. Ein Schwerpunkt hierbei ist die Nutzung von elektrischen statt hydraulischen, pneumatischen und mechanischen Systemen. Die notwendigen Leistungselektroniken haben DC-Zwischenkreise, welche mittels aktiven B6 und passiven B12 Gleichrichtern aus dem Dreiphasennetz gespeist werden. Eine mögliche Alternative ist die B6 Diodenbrücke in Kombination mit einem aktiven Netzfilter, welcher aufgrund der parallelen Anordnung eine höhere Leistungsdichte aufweist und darüber hinaus mehrere Geräte gleichzeitig entstören kann. Die alleinige Nutzung einer Diodenbrücke ist aufgrund des hohen Anteils von Stromharmonischen nicht zulässig.
Diese Arbeit beschäftigt sich mit der Entwicklung eines aktiven Filters für ein Dreiphasensystem mit variabler Frequenz von 360 bis 800 Hz. Es werden alle relevanten Bauteile wie Induktivitäten, EMV-Filter, Leistungsmodule und Zwischenkreiskondensator ausgelegt. Besonderes Augenmerk liegt auf dem kundenspezifischen Modul mit SiC-Dioden und SiCMOSFETs, welches vollständig elektrisch und thermisch charakterisiert wird. Die Änderung der Netzfrequenz beträgt bis zu 50 Hz/ms, was eine hohe Dynamik und Robustheit von der Filterregelung verlangt. Weiterhin ist im statischen Fall eine hohe Genauigkeit gefordert, da die 5. und 7. Harmonische auf unter 2% geregelt werden müssen. Um beiden Anforderungen gerecht zu werden, wird ein zweistufiger Regelungsalgorithmus entwickelt der auf zwei digitalen Signalprozessoren implementiert wird. Simulationen und Labormessungen bestätigen die Robustheit des Regelungskonzeptes.
Diese Arbeit stellt umfassend die Entwicklung von Luftfahrtgleichrichtern dar. Die Ergebnisse wurden in Konferenzen und Patenten veröffentlicht.
|
6 |
Optimization of rectifiers for aviation regarding power density and reliabilityLiebig, Sebastian 28 November 2014 (has links)
The intentions of the so-called "More Electrical Aircraft" (MEA) are higher efficiency and lower weight. A main topic here is the application of electrical instead of hydraulical, pneumatical and mechanical systems. The necessary power electronic devices have intermediate DC-links, which are typically supplied by a three-phase system with active B6 and passive B12 rectifiers. A possible alternative is the B6 diode bridge in combination with an active power filter (APF). Due to the parallel arrangement, the APF offers a higher power density and is able to compensate for harmonics from several devices. The use of the diode bridge rectifier alone is not permitted due to the highly distorted phase current.
The following investigations are dealing with the development of an active power filter for a three-phase supply with variable frequency from 360 to 800 Hz. All relevant components such as inductors, EMC-filters, power modules and DC-link capacitor are designed. A particular focus is put on the customized power module with SiC-MOSFETs and SiC-diodes, which is characterized electrically and thermally. The maximum supply frequency slope has a value of 50 Hz/ms, which requires a high dynamic and robustness on the control algorithm. Furthermore, the content of 5th and 7th harmonics must be reduced to less than 2 %, which demands a high accuracy. To cope with both requirements, a two-stage filter algorithm is developed and implemented in two independent signal processors. Simulations and laboratory experiments confirm the performance and robustness of the control algorithm.
This work comprehensively presents the design of aerospace rectifiers. The results were published in conferences and patents. / Hauptziele des sogenannten "More Electrical Aircraft" (MEA) sind Effizienzerhöhung und Gewichtseinsparung. Ein Schwerpunkt hierbei ist die Nutzung von elektrischen statt hydraulischen, pneumatischen und mechanischen Systemen. Die notwendigen Leistungselektroniken haben DC-Zwischenkreise, welche mittels aktiven B6 und passiven B12 Gleichrichtern aus dem Dreiphasennetz gespeist werden. Eine mögliche Alternative ist die B6 Diodenbrücke in Kombination mit einem aktiven Netzfilter, welcher aufgrund der parallelen Anordnung eine höhere Leistungsdichte aufweist und darüber hinaus mehrere Geräte gleichzeitig entstören kann. Die alleinige Nutzung einer Diodenbrücke ist aufgrund des hohen Anteils von Stromharmonischen nicht zulässig.
Diese Arbeit beschäftigt sich mit der Entwicklung eines aktiven Filters für ein Dreiphasensystem mit variabler Frequenz von 360 bis 800 Hz. Es werden alle relevanten Bauteile wie Induktivitäten, EMV-Filter, Leistungsmodule und Zwischenkreiskondensator ausgelegt. Besonderes Augenmerk liegt auf dem kundenspezifischen Modul mit SiC-Dioden und SiCMOSFETs, welches vollständig elektrisch und thermisch charakterisiert wird. Die Änderung der Netzfrequenz beträgt bis zu 50 Hz/ms, was eine hohe Dynamik und Robustheit von der Filterregelung verlangt. Weiterhin ist im statischen Fall eine hohe Genauigkeit gefordert, da die 5. und 7. Harmonische auf unter 2% geregelt werden müssen. Um beiden Anforderungen gerecht zu werden, wird ein zweistufiger Regelungsalgorithmus entwickelt der auf zwei digitalen Signalprozessoren implementiert wird. Simulationen und Labormessungen bestätigen die Robustheit des Regelungskonzeptes.
Diese Arbeit stellt umfassend die Entwicklung von Luftfahrtgleichrichtern dar. Die Ergebnisse wurden in Konferenzen und Patenten veröffentlicht.
|
Page generated in 0.1757 seconds