he diploma thesis prepares the documentation for permission of the construction of the town building in Ivančice.This is a building modification of the building.The object will be insulated from the outside of the polystyrene tl. 200 mm and thus the external dimensions of the building are changed to 18,855x15,955 m. The building will be roofed with a honeycomb roof on the crown system. The main entrance to the building is from the south side, behind which is a doorway allowing access to a room with a refreshment sitting and further to the entrance hall where there is a lift barrier and a two-line straight staircase allowing access to 2NP.On the left side of the elevator there is a corridor leading to technical rooms and cloakrooms for employees. From the entrance hall there is access to the closets for the public, computer rooms and staff backgrounds. After entry from the entrance hall to the entrance hall there is a toilet for the disabled and also access to social facilities separated separately for men and women. The sanitary facility for men includes two separate WC cabins, a hallway, a separate enclosed room with a urinal, a washroom with a cleaning room. Sanitary facilities for women include two separate closable WC cabins, a hall and a washroom. From the entrance there is access to the corridor allowing to the cloakroom for staff as well as to the washroom and toilet for the staff. When designing changes, emphasis was placed on preserving the original appearance of the building. The layout of the building has changed. The object meets the prescribed standards and regulations

The subject of my diploma thesis is the elaboration of an architectural study and project documentation for the construction of a detached house building. The new building is located on the outskirts of slavkov, in the district of Opava. It is a three-storey non-cellar building with vertical structures in the Porotherm system, monolithic reinforced concrete ceilings and a single-skin flat roof, vegetation. Ten apartments and four separate rooms are designed in the building and wellness is designed in the first floor.

The subject of this thesis is design of a new kindergarten for 36 children in the village Uhřice near Kyjov. The design is made in level of detailed design. The designed building is a partial basement, two-storey building of elongated shape. The facade of the building is designed as ventilated with wooden cladding, the northern part of the building is with contact thermal insulation system. The building has two single-layer flat roofs, one with a vegetation layer, the other with a PVC roofing with an attic. Entrance to object is from south side. On the first floor there are two separate departments for education of children with facilities and there is a technical-economic background in third part. On the second floor there are special classrooms that can be used by both the kindergarten and the adjacent elementary school, as well as the public. There is also a central office, a meeting room and a special speech therapy room. On the underground floor there are warehouses and technological facilities. Static scheme of the building consists is combined system of ceramic blocks and reinforced concrete columns with girders, in the basement is used reinforced concrete walls. The ceilings are designed from prestressed spiroll panels. Park landscaping was designed on the surrounding site. The purpose of the object is in the concept of preschool education. The concept is based on children acquiring the fundamentals of key qualities from outset and acquiring prerequisites for their lifelong learning.

The subject of the diploma thesis is a design of a kindergarten in a passive standard standing on a plot situated in the center of Fulnek. The building has two floors and the first floor is embedded in the terrain. The vertical load-bearing structures consist of sand-lime masonry with a contact thermal insulation system. The building is based on foundation strips due to the type of subsoil. The roofing is then solved by a single-layer flat roof with a vegetation layer.

The diploma thesis deals with the design of a low energy house in two structural variants, namely wooden frame construction and massive brick construction. The object is designed on a specific plot with two above-ground floors. The house meets the requirements of a three-member family. Both objects will be compared in terms of energy intensity and energy prices. The thesis is divided into two parts. In the first part of the thesis there is a description of how the basic wooden constructions are divided. There are also basic characteristics of some wooden frame structures and solid brick structures made of lime sand bricks, including their positive and negative properties. Basic energy balance and categorization of buildings in terms of energy intensity follows, including descriptions of the individual categories. The second part of the thesis deals with the design of the wooden structure itself. The text part contains the accompanying and the summarizing technical reports to the designed object. The perimeter structures of the wooden structure and the perimeter structures of the massive brick structure in contact with the exterior are assessed in terms of thermal technical requirements for the perimeter shells. At the end of the work the timber and brick structure are compared in terms of heat losses and energy demands. In addition, the individual alternatives for heating and water heating are compared in terms of fuel consumption costs and price comparability of 1 m2 of perimeter structures of brickwork and wooden structures. The drawing part contains a study of frame wood and brick structures. The building permit documentation is prepared for the wooden building. Part of the project documentation is calculation of heat losses, energy performance certificate, calculation of the energy intensity of the building, energy label of the building envelope and 3D visualization of the proposed building.

No description available.

The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.

This diploma thesis describes the design and elaboration of project documentation for realisation of construction of building of Guest house in municipality Ostravice. The building is situated on parcel 649/13 - arable land, in cadastral area Ostravice-1. Guest house is primarily intended for temporary accommodation of tourists in Beskydy mountains. The part of the building is restaurant as well as wellness centre with fitness gym. The building is situated in partially urbanised section of municipality. The access from the local road to parcel n. 470/20 to the main entrance into building will be enabled by newly purpose-built road with turnaround for passenger vehicles. The design respects the local plan and does not deviate from the character of the surrounding built-up area. The building has three above-ground floors and one underground floor, which is situated only under a part of the building. Project documentation is elaborated in conformity with effective laws, public notices and standards. Building of guesthouse is designed as wall system, with brick supporting walls made out of gas-silicate blocks and sand-lime bricks. The guest house is covered by two flat roofs with different inclination and with different height of ridges. The façade consists of stucco and for the third above-ground floor the façade is made out of ventilated larch-wood panelling. The building is placed in flat terrain.

Project documentation of garni hotel with wellness service of one basement and three floors from reinforced concrete monolithic skeleton, filled with masonry POROTHERM, horizontal structures prefabricated panels HELUZ, roofed by single-layers flat roof and sloping roof with wooden eaves and metal roofing.

This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.