Thesis (Ph. D.)--Virginia Polytechnic Institute and State University, 1991. / Vita. Abstract. Includes bibliographical references (leaves 132-137). Also available via the Internet.

Thesis (Ph. D.)--West Virginia University, 2000. / Title from document title page. Document formatted into pages; contains ix, 151 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 141-151).

Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.

This thesis investigates the utilisation of cheap RGBD sensors in rigid body tracking and 3D multiview registration for augmented and Virtual reality applications. RGBD sensors can be used as an affordable substitute for the more sophisticated, but expensive, conventional laser-based scanning and tracking solutions. Nevertheless, the low-cost sensing technology behind them has several drawbacks such as the limited range, significant noisiness and instability. To deal with these issues, an innovative adaptation of Kalman filtering scheme is first proposed to improve the precision, smoothness and robustness of raw RGBD outputs. It also extends the native capabilities of the sensor to capture further targets. The mathematical foundations of such an adaptation are explained in detail, and its corrective effect is validated with real tracking as well as 3D reconstruction experiments. A Graphics Processing Unit (GPU) implementation is also proposed with the different optimisation levels in order to ensure real-time responsiveness. After extensive experimentation with RGBD cameras, a significant difference in accuracy was noticed between the newer and ageing sensors. This decay could not be restored with conventional calibration. Thus, a novel method for worn RGBD sensors correction is also proposed. Another algorithm for background/foreground segmentation of RGBD images is contributed. The latter proceeds through background subtraction from colour and depth images separately, the resulting foreground regions are then fused for a more robust detection. The three previous contributions are used in a novel approach for multiview vehicle tracking for mixed reality needs. The determination of the position regarding the vehicle is achieved in two stages: the former is a sensor-wise robust filtering algorithm that is able to handle the uncertainties in the system and measurement models resulting in multiple position estimates; the latter algorithm aims at merging the independent estimates by using a set of optimal weighting coefficients. The outcome of fusion is used to determine vehicle’s orientation in the scene. Finally, a novel recursive filtering approach for sparse registration is proposed. Unlike ordinary state of the art alignment algorithms, the proposed method has four advantages that are not available altogether in any previous solution. It is able to deal with inherent noise contaminating sensory data; it is robust to uncertainties related to feature localisation; it combines the advantages of both L2 , L (infinity) norms for a higher performance and prevention of local minima; it also provides an estimated rigid body transformation along with its error covariance. This 3D registration scheme is validated in various challenging scenarios with both synthetic and real RGBD data.

The objective of this study is to develop an application of the Kalman filter for filtering and forecasting iceberg positions and velocities in order to calculate the risk of impact against a fixed structure or stationary vessel. Existing physical and probabilistic models are reviewed. Physical models are essentially based on the response of the iceberg to the forces acting on it. Statistical models forecast the motion of the iceberg based on past observations of the trajectory. A probabilistic iceberg trajectory model is used in this study so that uncertainties in the trajectory forecast can be explicitly included. The technique of Kalman filtering is described and applied to forecast future positions and velocities of an ice feature, including uncertainties.The trajectory forecast combined with a risk calculation, yields the probability of impact and the probability distribution of the time until impact. Numerical simulations are provided to demonstrate and validate the procedure. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate

The purpose of online parameter learning and modeling is to validate and restore the properties of a structure based on legitimate observations. Online parameter learning assists in determining the unidentified characteristics of a structure by offering enhanced predictions of the vibration responses of the system. From the utilization of modeling, the predicted outcomes can be produced with a minimal amount of given measurements, which can be compared to the true response of the system. In this simulation study, the Kalman filter technique is used to produce sets of predictions and to infer the stiffness parameter based on noisy measurement. From this, the performance of online parameter identification can be tested with respect to different noise levels. This research is based on simulation work showcasing how effective the Kalman filtering techniques are in dealing with analytical uncertainties of data. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2020. / FAU Electronic Theses and Dissertations Collection

No description available.

No description available.

No description available.

This thesis investigates the utilisation of cheap RGBD sensors in rigid body tracking and 3D multiview registration for augmented and Virtual reality applications. RGBD sensors can be used as an affordable substitute for the more sophisticated, but expensive, conventional laser-based scanning and tracking solutions. Nevertheless, the low-cost sensing technology behind them has several drawbacks such as the limited range, significant noisiness and instability. To deal with these issues, an innovative adaptation of Kalman filtering scheme is first proposed to improve the precision, smoothness and robustness of raw RGBD outputs. It also extends the native capabilities of the sensor to capture further targets. The mathematical foundations of such an adaptation are explained in detail, and its corrective effect is validated with real tracking as well as 3D reconstruction experiments. A Graphics Processing Unit (GPU) implementation is also proposed with the different optimisation levels in order to ensure real-time responsiveness. After extensive experimentation with RGBD cameras, a significant difference in accuracy was noticed between the newer and ageing sensors. This decay could not be restored with conventional calibration. Thus, a novel method for worn RGBD sensors correction is also proposed. Another algorithm for background/foreground segmentation of RGBD images is contributed. The latter proceeds through background subtraction from colour and depth images separately, the resulting foreground regions are then fused for a more robust detection. The three previous contributions are used in a novel approach for multiview vehicle tracking for mixed reality needs. The determination of the position regarding the vehicle is achieved in two stages: the former is a sensor-wise robust filtering algorithm that is able to handle the uncertainties in the system and measurement models resulting in multiple position estimates; the latter algorithm aims at merging the independent estimates by using a set of optimal weighting coefficients. The outcome of fusion is used to determine vehicle’s orientation in the scene. Finally, a novel recursive filtering approach for sparse registration is proposed. Unlike ordinary state of the art alignment algorithms, the proposed method has four advantages that are not available altogether in any previous solution. It is able to deal with inherent noise contaminating sensory data; it is robust to uncertainties related to feature localisation; it combines the advantages of both L2 , L (infinity) norms for a higher performance and prevention of local minima; it also provides an estimated rigid body transformation along with its error covariance. This 3D registration scheme is validated in various challenging scenarios with both synthetic and real RGBD data.