Spelling suggestions: "subject:"alkalinization"" "subject:"desalinization""
1 |
Factors Influencing Biotite WeatheringReed, Ryan R. 19 December 2000 (has links)
Weathering of biotite supplies nutrients such as K+ and weathers into vermiculite/montmorillonite or kaolinite, which have varying influences on soil properties and characteristics. This study was conducted to determine if the weathering mechanisms of biotite are controlled by temperature, or if other factors, such as vegetation or leaching intensity dominantly influence the weathering process. A column study investigation was conducted to assess the influence of different acids, simulated rainfall rates, surface horizons, and temperature on the weathering and cation release of biotite. A field investigation was also conducted on the clay mineral fraction of soils in Grayson County, VA formed above biotite granite. Selected acid leachates did show a greater Al+3, Fe+2, and Si+4 release with organic acids (ascorbic, citric, and fulvic) than that with hydrochloric acid treatment at high leachate rates. Loss of K+ is greater with ascorbic acid than all other acids at high leachate rates. Leachate rate interaction with low temperature was an influencing factor in cation release. Field investigations revealed a greater weathering intensity at high elevations evidenced by; (i) higher clay content, (ii) a dominance of 2:1 minerals, (iii) greater surface area in the upper horizons, (iv) minerals indicative of later stages in the biotite weathering mechanism, and (v) precipitation of halloysite in the C horizon at the high elevation site where temperature is lower and a suspected higher leaching intensity occur. / Master of Science
|
2 |
Mineralisation, Greisenisation and kaolinisation at Goonbarrow china clay pit, Cornwall, U.KBray, Colin James January 1980 (has links)
Goonbarrow, a China Clay pit situated within the St. Austell granite China Clay region, is the subject of a varied geochemical and isotopic study to determine the mode of genesis of the kaolinite and associated tin/tungsten mineralisation. Detailed geological mapping in conjunction with a geochemical study of the micas indicated that Goonbarrow is situated at the junction of the petrographically distinct phases of the St. Austell granite. An unusual assymmetric curved-feldspar-crystal pegmatite is found at the junction. Elvans at Goonbarrow and three other locations within the St. Austell granite are shown to be intruded during hydrothermal activity and in some cases after major vein formation. Three main types of vein were recognised in Goonbarrow, the major ones being spatially associated with zones of kaolinised granite. A potassium/ argon age study showed that the granites, pegmatite and greisens (and by inference tin/tungsten mineralisation) were formed at about 280 ±10 m.y. Four elvans, including Goonbarrow, were dated at around 272 m.y. Three of these elvans crosscut major vein, swarms. Age determinations on fine grained muscovite produced predominantly during kaolinisation and several kaolinised potassium feldspars also gave Hercynian eges. Scanning electron microscopy studies on daughter minerals in fluid inclusions indicated the presence of Al, As, Ca, Cl, Cu, Fe, K, Kg, Mn, Na, S, Sn and Zn although many of these elements were not present in minerals in the pit. Temperatures, pressures and salinities of vein fluids were determined by conventional fluid inclusion studies, which also indicated that the veins vere boiling. Hydrogen and oxygen isotope studies on vein quartz and greisen muscovites coupled with a re-interpretation of previous work and the fluid inclusion study produced a new model for the genesis of Cornish China Clay. Kaolinite genesis from the vapour phase of hot boiling fluids intimately associated with greisen bordered quartz/tourmaline veins of Hercynian age is favoured.
|
3 |
Paleoenvironmental conditions underpinning kaolinitisation of Lwamondo and Zebediala Kaolin DepositsRaphalalani, Avhatakali 18 September 2017 (has links)
MENVSC / Department of Mining and Environmental Gelogy / In the present study, the physico-chemical, applications, mineralogy, geochemistry and stable isotope of Lwamondo and Zebediela kaolin is documented, in order to understand the genesis, paleoenvironmental conditions and possible utilization. Mineral identification studies were conducted using X-ray diffractometer (XRD), Fourier transform infrared spectrophotometer (FTIR) and scanning electron microscope with energy dispersive X-ray micro analysis (SEM-EDX). Major oxides were identified by X-ray Florescence (XRF) whereas trace elements were identified by Laser Ablation Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Hydrogen and oxygen isotopic composition were determined by δ18O and δD isotopic measurements.
Kaolinite was dominant mineral in all the kaolin samples whereas muscovite, quartz, goethite, hematite, smectite, anatase occurred in minor to trace quantities. The chemical data show that the kaolins are composed mainly of SiO2 and Al2O3 due to the presence of quartz and kaolinite, with minor to trace amounts of other elements such as Ca, Na, Cr, K, Fe, Mn, Mg, P and Ti which affected the kaolin application negatively. Lower concentration of Ca, Na, K, Fe, Mn, Mg, and Ti show the extent of the kaolinitisation. The samples were enriched in Ni and depleted in some other trace elements. The chondrite-normalised rare earth elements patterns show enrichmnent in Heavy Rare Earth Elements (HREE) than Light Rare Earth Elements (LREE) with slight positive Eu anomaly. The Rare Earth Elements (REE) pattern and the content of other trace elements show evidence of weathering processes related to kaolinitisatioon.
Kaolin genesis is explained using kaolin mineralogy, particle morphology, structural order (functional group), major and trace elements geochemical data. The data suggest that kaolin is derived from the intensive chemical weathering of intermediate to mafic rocks deposited in non-marine environment. The stable isotopes were used to determine the paleoenvironmental conditions which influenced kaolinitisation of Lwamondo and Zebediela kaolins. Stable isotopes mean values for kaolinite from both Lwamondo and Zebediela were as follows: δ18O for Lwamondo= +18.57‰ and for Zebediela = +16.67 ‰
vii
and δD for Lwamondo = -65‰ and for Zebediela = -64‰. The calculated mean temperatures were 26.94 ⁰C for Lwamondo kaolin and 36 ⁰C for Zebediela kaolin. Low temperatures were inferred from stable isotope values to have been involved in the kaolinitisation wherein hydrothermal processes were eliminated. The data suggests that kaolin was formed in a weathering environment. The kaolin is found to be suitable for brick making and based on the physico-chemical, mineralogical and chemical data it was suggested that the kaolin could also be used in producing low temperature ceramics, refractory materials, pottery and stoneware
|
4 |
Paleoenvironmental reconstruction of cretaceous-tertiary kaolin deposits in the Doula Sub-Basin in CameroonBukalo, Ntumba Nenita 18 September 2017 (has links)
PhD (Geology) / Department of Mining and Environmental Geology / Cretaceous-Tertiary Periods marked the break-up of Gondwana, a large landmass composed of most of the present-day southern continents. In understanding the events of the supercontinental break-up, paleoenvironmental studies need to be carried out. In such studies, kaolinites could be used as paleoenvironmental proxies due to their small particle sizes and large surface area. It is in this context that this research sought to reconstruct the paleoenvironments in which selected Cretaceous-Tertiary kaolin deposits in the Douala Sub-Basin in Cameroon formed.
To achieve this objective, mineralogical and geochemical characterisations were carried out using x-ray diffractometry, scanning electron microscopy, Fourier transform infrared spectrometry, thermal analyses and x-ray fluorescence spectroscopy. Trace elements and stable isotopes were analysed using mass spectrometries. Ages of zircons in the kaolins were determined using laser ablation magnetic sector-field inductively coupled plasma mass spectrometry (LA-SF-ICP-MS) U-Pb geochronology. Diagnostic evaluation for industrial applications of the kaolins were carried out using particle size distribution, texture, moisture content, pH, and electric conductivity.
Six kaolin deposits from Cretaceous-tertiary Formations of the Douala Sub-Basin were studied; namely, Bomkoul (Tertiary), Dibamba (Tertiary), Ediki (Cretaceous), Logbaba (Cretaceous), Missole (Tertiary) and Yatchika (Cretaceous). The nature and occurrences of these kaolin deposits in Cameroon were determined through thorough mineralogical and geochemical characterisations of bulk (< 2 mm size fraction), silt (2-63 μm size fraction) and clay samples (< 2 μm size fraction). By quantifying the mineral phases present, the morphology and the functional groups in the kaolins are presented as the mineralogical characteristics of kaolins of each study site; whereas, the major oxides geochemistry and the micro-elemental composition constitute the geochemical characteristics of these kaolins. The minerals’ geneses were also determined and the prevailing paleoenvironmental and paleoclimatic conditions in which they were formed were reconstructed using trace elements and stable isotopes of oxygen and hydrogen in kaolinite. The maximum age of the kaolins were determined using U-Pb LA-SFICP-MS dating of zircons in the kaolin deposits. Diagnostic evaluation of the kaolins was carried out, and involved the determination of physical characteristics (particle size, texture, colour and moisture content) and physico-chemical characteristics (pH and electrical conductivity).
Results showed that kaolinite and quartz (as major phases), smectite and/or illite (as minor phases), anatase and rutile (as minor or trace phases), goethite and hematite (as trace
viii
phases) were the mineral phases present in bulk and silt samples. Whereas, in the < 2 μm fractions, the mineral phases are made up of kaolinite and smectite (as major phases), smectite and/or illite (as minor phases), anatase and rutile (as minor or trace phases), goethite and hematite (as trace phases). The kaolins are mostly made up of thin platy or pseudo-hexagonal particles or flakes, books or stacks of kaolinite. The Dibamba, Logbaba and Missole II kaolins have well-ordered structures. Exothermic peak temperatures were generally between 943-988oC. The most abundant major oxides are silica and alumina, followed by iron oxide and titania; though Logbaba and Missole II had higher titania than iron oxide. 85% of the kaolins, portrayed extreme silicate weathering (chemical index of alteration > 80%) and are compositionally mature (index of compositional variability > 0.78). The geochemical composition of the kaolins showed that source rocks of these kaolins vary between rhyolite/granite and rhyolite/granite + basalt. The geochemistry also suggested that the kaolins formed in a marine environment (except Logbaba samples).
Trace elements results revealed that Cretaceous-Tertiary kaolins in the Douala Sub-Basin are mainly enriched in rare earth elements compared to the upper continental crust, and have negative Eu anomaly. Large ion lithophiles (mainly Rb and U) were highly enriched in samples, high field strength elements (Y and Nb) were enriched in studied samples of all fractions; and transition trace elements generally had concentrations quite similar to upper continental crust values. Stable isotopes showed that the kaolins were formed in a supergene environment; and temperatures of kaolinitisation (assuming equilibrium with the global meteoric water line) were 26.58oC ± 9.65oC for Cretaceous kaolins and 29.40oC ± 7.22oC for Tertiary kaolins. Assuming equilibrium with the local (Douala) meteoric water line, the temperatures of kaolinitisation were 24.64oC ± 9.48oC for Cretaceous and 27.42oC ± 7.08oC for Tertiary kaolins.
Four main zircon populations were identified from radiogenic dating: the 1st between 550 and 650 Ma, the 2nd between 950 and 1050 Ma, the 3rd around 1600 Ma and the 4th between 2800-3200 Ma. These four zircon populations belong to the Proterozoic (Neo-, Meso- and Paleoproterozoic) and the Archean. The maximum depositional ages of the kaolins, reflected by the youngest weighted averages of zircon populations varied between 588 ± 2 Ma and 612 ± 2 Ma, all belonging to the Ediacaran Period (Neoproterozoic).
The diagnostic evaluation of the kaolins revealed that the kaolins are very sandy, with 50% of the samples having a sandy loamy clay or sandy loam texture. The colour of the samples varied considerably from white to darker colours (dark grey); with 15% of the kaolins being light reddish brown. The moisture content was generally very low (< 2 wt %) in all size fractions, except in Yatchika samples (moisture content > 2 wt %). The kaolins are generally acidic, with
ix
a pH(KCl) varying between 3.06 and 3.81, except in Missole I samples, which had a pH (KCl) < 2. The electrical conductivity (EC) generally varied between 20 to ~ 50 μS/cm, except Dibamba and MSL II 01 samples which had EC values in the interval 50 μS/cm < EC < 80 μS/cm; and Missole I samples having an EC > 7500 μS/cm.
In conclusion, no great distinction was found between Cretaceous and Tertiary kaolins of the Douala Sub-Basin based on their mineralogy and geochemistry. The best kaolins in terms of these characteristics, and in comparison with the Georgia Kaolins (known for their high kaolinite quality), were the Dibamba (Tertiary), Logbaba (Cretaceous) and Missole II (Tertiary) kaolins. Based on their compositional maturity and mineralogical characteristics, these three kaolins are considered to be second cycle sediments; unlike Bomkoul, Yatchika and Ediki kaolins, which are believed to be first cycle sediments. Based on the trace elements and stable isotopes composition, Cretaceous and Tertiary kaolins of the Douala Sub-Basin were derived from felsic rocks. However, Cretaceous kaolins were formed in a cooler anoxic reducing environment; whereas the Tertiary kaolins were formed in a warmer oxidising environment, with higher precipitation. Ages of zircons in Cretaceous-Tertiary kaolins suggested that the zircon formed during two main tectonic events: the Eburnean orogeny, during which older zircons crystallised and the Pan-African orogeny, during which younger zircons crystallised. The maximum depositional ages of the kaolins varied between 588 ± 2 Ma and 612 ± 2 Ma. The main identified sources of these zircons are the Archean Ntem Complex, the Paleoproterozoic Nyong Group and the Neoproterozoic Yaounde Group. The diagnostic evaluation indicated that the particle size greatly influences the mineralogy and geochemistry of the kaolins because the finer particles (< 2 μm) have higher amounts of kaolinite and Al2O3. The moisture content of the kaolins makes them suitable as paint fillers and in soap production. Paper coating, paper filler, ceramics, pharmaceutics and cosmetics are potential applications for the kaolins, though particle size reduction and beneficiation will give them a higher quality. However, because these kaolin deposits are not big and extensive, they cannot be recommended for large scale industrial applications; but they can be used for bricks, pottery and stoneware manufacturing.
|
Page generated in 0.0825 seconds