Theese objects from burned clay are representing the sublimation of traditional technologies and materials with contemporary visual technologies such as 3D.

The master’s thesis deals with the piezoelectric coefficients, the resonance frequency and especially the piezoelectric constants verification. With the assistance of several devices, for instance LCR-meter HIOKI 3532, impedance analyzer Agilent 4294A and LCR-meter Agilent E4980A, the resonance and the anti-resonance frequencies as well as impedance and capacitance of samples are measured. The paper opens with the theory of the piezoelectric phenomenon and the difference between direct and indirect piezoelectric phenomenon, it also describes the basic behaviour of a piezoelectric ceramic element during mechanical straining or applied voltage. Further, the paper concerns the description of various piezoelectric constants and their calculations. Subsequent part of the paper is devoted to the temperature dependence of the main piezoelectric parameters of PZT ceramics. The materials coefficients are delineated as a function of temperature of the piezoelectric charge coefficients dij, relative permittivity r, electromechanical coupling factor kij and frequency constants Ni. One of the chapters also determines the piezoelectric charge constant d33 of PZT ceramics by laser interferometer and compares it with the value measured by resonance methods. The surface displacement was measured by a single-beam interferometer Polytec OFV-5000. The results of measurements of piezoelectric charge coefficients d33 acquired by the first and the second method are identical. The last section of the paper is focused on different methods of experimental studies on the characteristics of heat transfer by diffusing heat through conduction between the silver-plated surface of cylinder made of PZT ceramics. The effect on the resonance and the anti-resonance frequencies is monitored. There after, the real heat, determined by thermo camera and the physical model of heat transfer created in program COMSOL Multiphysics, is analysed.