Diploma thesis „ Newly bulit apartment house“ deals with a proposal of block of flats in Veselí nad Lužnicí. The block of flats has got four storeys with no celler, and is in a rectangle shape. It is independently built house on a flat terrain. Bricked construction consists of ceramic constructuion blocks Heluz and reinforced concrete ceilings. The building is based on foundation belts and is roofed by a single-coat flat roof. There are 29 housing units designed in the building.

The Thesis deals with a proposal for a new mixed-used building in the city of Moravske Budejovice in the cadastral area of Moravske Budejovice. The building is a three-floored house without a cellar. The roof of the house is completely flattened. On the first floor, there are commercial rooms, hairdresser´s and a bookshop. Apartments are on the second and third floor. The construction will be built of clay blocks which are 300 mm wide. The insulation of the building is formed by thermal insulation composite system. The ceiling is created by reinforced concrete slabs 250 mm wide. Parts of the documentation are water-supply, electricity, pipeline and waste water pipe. The description of pavement and driveway is included. The Thesis is written as a project to build the construction.

The aim of the diploma thesis is to elaborate project documentation of a new-build mixed-use building in Moravske Budejovice, in the cadastral area of Moravske Budejovice. The mixed-use building comprises a partial cellar and three floors above the ground. In the cellar, technical facilities and storage space for the residental part of the building can be found. The ground floor and the part of the first floor are designed for commercial premises, a hairdresser's, a florist's, a bookshop and a café. Residental unit consisting of three flats is located on the first and second floor. the building is made from 300 mm thick ceramic construction blocks with the external thermal insulation system. Ceiling construction is made of 250 mm thick concrete monolithic panels. Furthermore, the documentation deals with potable water, electric power and gas couplers, sewerage system, rainwater sewer and paved surface for pedestrians and motor vehicles. The thesis is elaborated as documentation for the building execution.

The content of this diploma thesis is the design of a new boarding nursing home in Dolany. building with two floors and a residential attic. The main entrance to the building is located on the north side. On the first floor there is a spacious common room, two apartments (one belonging to the administrator of the building), technical room, room for maintenance and cleaning, storage, toilets, areas for nursing services and cellars. The second and third floors are accessible by internal stairs and elevators. Both floors have the same accessibility. In each of them there are a total of 7 apartments. the vertical load-bearing structures are made of ceramic masonry with a contact thermal insulation system. The roof structure consists of a gable roof with ceramic roofing. The project documentation was prepared in accordance with valid legal and technical regulations.

The project deals with the construction of a multifunctional residential building with 5 apartments, shop offices and law. The building is located in the village of Želechovice Dřevnicí on flat terrain. The house is designed in a structural system Porotherm, covered gable roof 45 °. The building is designed in accordance with the master plan of the municipality of Želechovice Dřevnicí, its character builds on the surrounding buildings and at work are respected by all laws and regulations relating to the design of buildings. The drawing part was processed by computer in AutoCad. Part of the project documentation is part of the drawing, text and calculation. The project is assigned a technical assessment of thermal and fire protection of the building.

My thesis solveses the office building. The building will be located in Šumperk. It will be located near the center. The building has two floors and a partial basement floor. Ceilings are beams with ceramic inserts and reinforced concrete slabs. Vertical structure consists of a ceramic blocks in the aboveground parts and concrete blocks in the underground section. The roof is walked on vegetation. The staircase is reinforced concrete, monolithic. The entire building is insulated with mineral wool. Basement is insulated with polystyrene foam.

The master’s Thesis – Minibrewery in Vyškov, has a form of project documentation which contains relevant requirements according to valid regulations. The proposed building is situated on the plot number 2123/72 in the city Vyškov. It is a detached building which stands separately on the flat terrain. It is a two-storey building with partial basement. It is formed from three units – a minibrewery, a brasserie with kitchen and an administrative part. It is made of monolithic reinforced concrete frame, brick blocks with vegetative flat roof. The upper level attic gable is at the height of 8,880 meters. The seminar paper – minibrewery in Vyškov – is a part of the Master’s Thesis.

This thesis is to evaluate currently used wax and compare its properties with of newly purchased one. Further, it is to evaluate whether the quality is reflected by using "boiled wax'', which is being used as a runner wax. All tests were carried out at the Fimes a. s. In the first part of this thesis, there is a brief description of the lost wax method. This is followed by a decription of wax blends from technology point of view. The experimental part describes the operations from the production of wax patterns, through their dimensional inspection, up until dewaxing process. All the results are noted and compared.

Michal Zezula: Selected issues in the High Medieval transformation of the Moravian- Silesian border region (evidence from archeological sources) This study consists of three chapters and focuses on the Moravian-Silesian border region and its transformation during the High Middle Ages (in the 13th century). For most of the Early Middle Ages, this region lay on the boundary between the early Bohemian and Polish states, and after being annexed to the Přemyslid territories at the end of the 12th century it underwent fundamental changes, which are symbolized by the early emergence of institutionalized towns within the Bohemian Lands. The first chapter focuses on the Golensizi region in the Early Middle Ages, particularly on the village of Holasovice, which has attracted the attention of archeologists and historical researchers for over two centuries. Based on an assessment of older and more recent archeological discoveries and surveys, the significance of the location during the second half of the 12th century and the first half of the 13th century has been determined. Although there is at present no relevant archeological information which would provide evidence of the role played by Holasovice in the structures of the Piast state, its status as a local- level administrative centre in the Přemyslid-controlled...

The diploma thesis is divided into four main parts. The first part deals with the issue of waste management and its energy utilization in waste incineration. Processed harmful substances produced by incineration as well as emission limits. It deals with the types of catalytic carriers, their description, production and more detailed processing of ceramic foam VUKOPOR. The second part is devoted to technologies utilizing catalytic processes and a more detailed specification of the process. In the third part there is processed the calculation methods for pressure losses for individual types of carriers. Fourth, the most extensive part describes the INTEQII experimental device, its technology and construction, as well as the principle of the practical part, measuring of the pressure losses of carriers. It includes the evaluation of pressure losses in separate categories of carriers, such as the bed, HoneyComb and VUKOPOR ceramic foam. Subsequently, a comparison of the pressure losses of all carriers is made relative to the reference size of 1 m. The impact of bonding of VUKOPOR foam samples on the size of pressure losses is discussed. At the end of this section, the suitability of calculation methods for individual carriers is evaluated, depending on the experimental pressure loss data.