251 |
Estudo das bandas difusas do Na2 excitados por laser ultravioletaCorreia, Ricardo Rego Bordalo January 1988 (has links)
Neste trabalho foi feito um esforço para analisar o comportamento do perfil das bandas difusas violetas de emissão do dimero de sódio induzida por um laser de nitrogênio, no vapor de sódio produzido dentro de uma célula do tipo Heat-Pipe Oven, variando-se a temperatura e a pressão do gás inerte. Além disso, foi feita uma tentativa de identificação das bandas violetas e ultravioletas produzidas no mesmo sistema por um laser de excímero. Tanto para a emissão induzida pelo laser de nitrogênio, como pelo laser de excímero, um programa de computador desenvolvido por nós para simular estes espectros, a partir da teoria quase-estática para emissóes contínuas moleculares, utilizando as curvas de energia potencial interatômica disponíveis na literatura. / In this work, an effort had been made to analyze the violet diffuse bands profile behavior from the induced sodium dimer emission by a nytrogen laser, in the sodium vapor produced inside a Heat-Pipe Oven, varying the temperature and the inert gas pressure. Furthermore had been made an attempt to identify the violet and ultraviolet diffuse bands produced on a similar sistem by an excimer one, a computer program was developed to simulate their emission profile based on the quasistatic theory for molecular continuous emission, using the available theoretical interatomic potencial energy curves.
|
252 |
Pulsed infrared laser-induced chlorination reactionsIbrahim, Md. Sani B January 2011 (has links)
Typescript (photocopy). / Digitized by Kansas Correctional Industries
|
253 |
Examining and sculpting gold nanostructures with laser lightHerrmann, Lars Oliver January 2014 (has links)
No description available.
|
254 |
Surface modification by laser movement of molten materialEarl, Caroline Louise January 2015 (has links)
No description available.
|
255 |
Multi-wavelength injection locking of semiconductor laser diodes and its applications.January 2004 (has links)
Fok Mei-po. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2004. / Includes bibliographical references (leaves 81-82). / Abstracts in English and Chinese. / Abstract --- p.i / Acknowledgements --- p.iv / Table of Content --- p.v / Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Overview of Injection Locking --- p.2 / Chapter 1.2 --- Applications of Single Wavelength Injection Locking --- p.4 / Chapter 1.3 --- Applications of Multi-wavelength Injection Locking --- p.5 / Chapter 1.4 --- Organization of Thesis --- p.6 / Chapter 2 --- Principle and Theory --- p.10 / Chapter 2.1 --- Principle of Injection Locking --- p.11 / Chapter 2.2 --- Amplitude Equalization by Injection Locking --- p.14 / Chapter 2.3 --- Repolarization by Injection Locking --- p.16 / Chapter 2.4 --- Reduction of Relative Intensity Noise --- p.18 / Chapter 2.5 --- Multi-wavelength Injection Locking --- p.20 / Chapter 2.6 --- Polarization Maintaining Fiber Loop Mirror Filter --- p.21 / Chapter 2.7 --- Self-phase Modulation --- p.23 / Chapter 3 --- Preliminary Experimental Study --- p.26 / Chapter 3.1 --- Reduction of Amplitude Modulation --- p.27 / Chapter 3.2 --- Repolarization --- p.33 / Chapter 3.3 --- Relative Intensity Noise and Relaxation Oscillation Frequency --- p.35 / Chapter 3.4 --- Spurious Free Dynamic Range --- p.38 / Chapter 4 --- Optical mm-wave Generation --- p.42 / Chapter 4.1 --- Introduction --- p.43 / Chapter 4.2 --- Experimental Details --- p.44 / Chapter 4.3 --- Results and Discussion --- p.46 / Chapter 4.4 --- Summary --- p.52 / Chapter 5 --- Two-mode Injection Locking for Wavelength-tunable Pulse Generation --- p.56 / Chapter 5.1 --- Introduction --- p.57 / Chapter 5.2 --- Experimental Details --- p.58 / Chapter 5.3 --- Results and Discussion --- p.60 / Chapter 5.4 --- Summary --- p.64 / Chapter 6 --- Multi-wavelength Injection Locking Using a Polarization Maintaining Fiber Loop Mirror Filter --- p.67 / Chapter 6.1 --- Introduction --- p.69 / Chapter 6.2 --- Preliminary Study of the Generation of Multi-wavelength Injection Source --- p.70 / Chapter 6.3 --- Experimental Details --- p.73 / Chapter 6.4 --- Results and Discussion --- p.75 / Chapter 6.5 --- Summary --- p.80 / Chapter 7 --- Conclusion and Future Work --- p.83 / Chapter 7.1 --- Conclusion --- p.84 / Chapter 7.2 --- Future Work --- p.87 / Appendices --- p.A-i / Appendix A. List of Publication --- p.A-i / Appendix B. List of Figures --- p.A-iii
|
256 |
Space debris mitigation in Low Earth Orbit (LEO) using high power pulsed lasersHussein, Alaa Adnan January 2018 (has links)
Mitigating space debris with lasers is investigated as a possible mechanism for contactless space debris deflection in Low Earth Orbit (LEO). This deflection mechanism can be carried out by irradiating the space debris surface with a high-power laser beam. The energy absorbed by the surface of the debris, from the laser beam, sublimates the irradiated surface, transforming it to gas from solid. The ablated material is formed into a plume of ejecta, which acts against the orbital debris if the laser is beamed in the right direction; it produces a small push or thrust that deflects the debris by reducing its orbital velocity, altitude and eventually its lifetime in orbit. This approach could also be used to push space debris away from operational satellites paths. Laser ablation depends mainly on understanding the physical properties of both, the laser beam and the space debris. The interaction process for three different commonly used spacecraft materials are illuminated by a laser beam and investigated both experimentally and by using theoretical models. Experimental results and theoretical verifications are employed to evaluate the feasibility of the ablation model and to understand its performance in producing an effective deflection of space debris. This was investigated using Nd3+ Glass laser pulses with three metals: nickel (Ni), aluminium (Al) and copper (Cu). The Nd3+ Glass laser operated at a wavelength of 1.06 μm that provided intensities just below the threshold for plasma formation. This interaction produces surface power intensities ranging between one GW/m2 to one TW/m2, which produces high order temperature gradients that cause non-equilibrium energy transport phenomenon. This phenomenon cannot be explained by classical theories. The results have been used for the enhancement of the ablation model. Additional enhancements included the temperature penetration in the target surface. The surface temperature transients of metals due to laser interaction have also been investigated, and heat transfer is simulated by utilising a kinetic particle model, which captures the dominant energy transport processes. This model of energy transport permits determination of the significant decline in temperature gradients and the non-equilibrium conditions that occur between the Fermi surface conduction electrons and lattice phonons. This results in an accurate temperature distribution calculation within the space debris. The laser pulse specification and the properties of the space debris material were specified for simulation. The kinetic model has been used to simulate the spatial temperature distribution growth in the space debris when illuminated with a 1.06 μm wavelength Nd3+ Glass laser. The evaporation physics are also incorporated into the kinetic model. The average mass flow rate has been evaluated. A critical difference has been discovered between the experimental results and the predicted results using the classical Fourier Theory. The experimental data of the target surface temperatures are compared with Fourier and electron Kinetic theories. The experimental results validate the theoretical results and model improvements. It also illustrated the inaccuracy of Fourier theory regarding its solution of steep energy gradients and its failure to illustrate the non-equilibrium energy transport state, which grows between electrons and lattice phonons. It was noticed that the electron Kinetic theory results provide sufficient agreement with the experimental results below the boiling point and give a much better model than Fourier theory above the boiling temperature. The enhancements have permitted the laser specifications and the performance of the ablation treatment to be characterised. The performance of orbital debris mitigation with pulsed lasers outperformed alternative techniques that can produce a small contactless push on space junk. This method avoids sending complicated spacecraft into orbits to take space debris away from Earth orbits. The laser power that is required to reduce the altitude and the orbital velocity of space debris were predicted and calculated theoretically. The performance has been assessed by its capability to move small debris, centimetre size, by at least a couple of m/s. The results confirmed the possible benefits of using lasers to mitigate space debris in LEO. Employing current technologies together with a high Technology Readiness Level (TRL), an affordable and compact laser system could be successfully constructed and attached to traditional artificial satellites as a space-based laser system. Such a system could demonstrate the method, synergies and techniques of laser ablation. Mission complexity and the extra mass are saved by the direct debris ablation process, which can operate at a relatively small distance compared to a ground-based laser system. The analysis thus confirms the feasibility of utilising space-based laser systems and the applicability of the model's experimental validation.
|
257 |
Harpa laser para controle de síntese sonoraDuarte, Ricardo Torgal Dias January 2011 (has links)
Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Telecomunicações. Universidade do Porto. Faculdade de Engenharia. 2011
|
258 |
Development Of Beam Stabilization And Phase Modulation Units For 2dir InstrumentJanuary 2015 (has links)
1 / Jianan Tang
|
259 |
Advanced laser processing and photoluminescence characterisation of high efficiency silicon solar cellsAbbott, Malcolm David, School of Photovoltaic & Renewable Energy Engineering, UNSW January 2006 (has links)
Many current technologies used in solar cell fabrication have been successfully adapted from the integrated circuits industry. The success of laser processing applications in this industry indicates that such techniques should be considered to reduce manufacturing costs and to improve electrical efficiency of solar cells. This thesis examines the application of advanced laser processing to improve the electrical performance and reduce manufacturing costs of solar cells. It focuses on several different aspects of laser processing; (1) understanding and characterising the effect of laser pulses on silicon, (2) developing new fabrication technologies and (3) integrating laser processes with working solar cell devices. The thesis begins with an overview of existing solar cell structures that incorporate laser processing. A study is then presented that explores the detrimental effects of laser processing, how it can be avoided and how to characterise its influence on solar cell electrical properties. Experimental results combine Yang defect etching, photoconductance decay measurements and a new technique of photoluminescence imaging to isolate the influence of laser ablation and laser melting on silicon wafers. This understanding is used in the development of several laser processes. A laser texturing technique is developed to texture the surface of multicrystalline wafers that cannot be effectively textured with the alkaline etches used on single crystal material. Three advanced laser contacting schemes; laser micro contacts, laser defined aluminium electrodes and laser doping, are assessed as techniques to improve cell efficiency and to reduce fabrication costs. In the final chapter the integration of laser processing with solar cell devices is demonstrated through the fabrication and characterisation of n-type double-sided solar cells with laser doped contacts. Efficiencies of up to 17.4% with an open circuit voltage of 672 mV are reported. This thesis also presents the application of a new characterisation technique, based on photoluminescence, to aid in improving both new and existing fabrication technologies. The work presented in this thesis demonstrates the applicability of advanced laser processing to solar cell fabrication and shows how laser processes can be used in a variety of ways to improve the electrical performance and reduce the fabrication complexity of solar cell devices.
|
260 |
Adjunctive effects of a low-power laser on the healing of periodontal tissueLai, Man-lung, Stanley. January 2003 (has links)
Thesis (M. D. S.)--University of Hong Kong, 2003. / Title proper from title frame. Also available in printed format.
|
Page generated in 0.0497 seconds