The diploma thesis deals with a matter of a leak testingo of the Schreiner devices in the company Kovolis Hedvikov a.s. The tested components are the heat exchangers made from alloy of aluminium used for automobiles. Due to the impact of porosity texture created during the components casting there is leaking. The analysis was accomplished to find out the most problematic parts of these components. Subsequently the testing and measuring were performed in order to classify the testing and detect its accuracy. The summary and suggested solutions of how to improve the accuracy of measuring of the aluminium components leaking are presented in the conclusion.

BACKGROUND: Left ventricular outflow tract (LVOT) obstruction and paravalvular leak (PVL) are relatively uncommon, but are serious complications of prosthetic valve replacement. CASE PRESENTATION: We present a case that displays the unique therapeutic challenges of treating a patient who developed both LVOT obstruction and mitral PVL after undergoing surgical aortic and mitral valve replacement (MVR). We also describe the use of alcohol septal ablation and albumin-glutaraldehyde (BioGlue) for septal ablation to percutaneously treat the patient's LVOT obstruction, followed by use of an Amplatzer vascular plug for percutaneous closure of an antero-medial mitral PVL associated with severe regurgitation. CONCLUSION: Percutaneous interventional management of these entities may be considered as an initial therapeutic option, especially in high-risk patients with significant morbidity and mortality of repeat surgical operations.

Title: An analysis of safety measures in Tipsport arena for dealing with emergencies Objectives: The aim of this thesis is to describe and analyze technology in Tipsport Arena ice stadium in Holešovice in terms of safety and security measures and to evaluate the internal measures of HC Sparta Praha. Identify emergency situations that may arise at the ice rink and bring preventive measures generated against these situations. Methods: In this thesis compilation methods were used for the analysis of the key points about technology and hazardous substances used at the ice rink, security plans arising from legislation and an analysis of the integrated rescue system. In the practical part, a technology and safety measures selected ice rink, the used of methods of analysis, observation and interviews. Results: Safety measures Tipsport arena is evaluated as positive and its analysis is given in the safety measures servicing of refrigeration devices, security controls before organizing events, breakdown of activities performed by fire hazard and are accompanied by the documentation of fire protection in Tipsport arena. Keywords: leak, ammonia, system, stadium, failure

Conselho Nacional de Desenvolvimento CientÃfico e TecnolÃgico / Esse estudo avaliou as anastomoses colo-cÃlicas sem preparo intestinal comparando com anastomoses realizadas com preparo intestinal prÃvio. Foram utilizados 42 animais (Canis familiares) fÃmeas, pesando entre 8,4 a 16,9 Kg, clinicamente sadios, oriundos do Canil da Prefeitura Municipal de Teresina, PiauÃ. Foram distribuÃdos em 2 grupos de 21 animais: grupo I (controle) â animais submetidos ao preparo intestinal com soluÃÃo glicerinada a 12% via retal 24hs antes do procedimento e grupo II (estudo) â animais submetidos ao procedimento sem preparo intestinal prÃvio. Todos os animais de ambos os grupos foram submetidos à laparotomia com secÃÃo do cÃlon descendente e anastomose primÃria com fio de polipropileno e acompanhados no trans e pÃs-operatÃrio por um mÃdico veterinÃrio, sendo a dieta instituÃda quando ocorreu a primeira evacuaÃÃo. Esses animais foram submetidos à eutanÃsia no 21 dia de pÃs-operatÃrio apÃs anestesia venosa com cloridrato de cetamina e aplicaÃÃo de cloreto de potÃssio a 20% endovenosa; realizou-se nova laparotomia e avaliaÃÃo da anastomose colo-cÃlica. Avaliou-se a evoluÃÃo clÃnica, o grau de aderÃncias intestinais e a pressÃo de ruptura da anastomose. Utilizou-se o teste T para amostras nÃo pareadas para dados paramÃtricos e Mann-Whitney test para dados nÃo paramÃtricos. Ocorreu um (4,5%) Ãbito em cada grupo sendo o do grupo I (controle) no 7 dia pÃs-operatÃrio devido à deiscÃncia da anastomose colo-cÃlica e outro no 10 dia de pÃs-operatÃrio no grupo II(estudo) devido à infecÃÃo de sÃtio cirÃrgico incisional profunda com deiscÃncia total da parede abdominal. NÃo foi observado diferenÃa estatisticamente significante no grau de aderÃncias intestinais entre os grupos. Durante a realizaÃÃo do teste de pressÃo de ruptura ocorreu ruptura da anastomose de um animal em cada grupo e nÃo houve diferenÃa estatisticamente significante entre os grupos (p>0,05). A anastomose colo-cÃlica sem preparo intestinal apresentou a mesma seguranÃa e eficÃcia da anastomose realizada com preparo prÃvio. / Esse estudo avaliou as anastomoses colo-cÃlicas sem preparo intestinal comparando com anastomoses realizadas com preparo intestinal prÃvio. Foram utilizados 42 animais (Canis familiares) fÃmeas, pesando entre 8,4 a 16,9 Kg, clinicamente sadios, oriundos do Canil da Prefeitura Municipal de Teresina, PiauÃ. Foram distribuÃdos em 2 grupos de 21 animais: grupo I (controle) â animais submetidos ao preparo intestinal com soluÃÃo glicerinada a 12% via retal 24hs antes do procedimento e grupo II (estudo) â animais submetidos ao procedimento sem preparo intestinal prÃvio. Todos os animais de ambos os grupos foram submetidos à laparotomia com secÃÃo do cÃlon descendente e anastomose primÃria com fio de polipropileno e acompanhados no trans e pÃs-operatÃrio por um mÃdico veterinÃrio, sendo a dieta instituÃda quando ocorreu a primeira evacuaÃÃo. Esses animais foram submetidos à eutanÃsia no 21 dia de pÃs-operatÃrio apÃs anestesia venosa com cloridrato de cetamina e aplicaÃÃo de cloreto de potÃssio a 20% endovenosa; realizou-se nova laparotomia e avaliaÃÃo da anastomose colo-cÃlica. Avaliou-se a evoluÃÃo clÃnica, o grau de aderÃncias intestinais e a pressÃo de ruptura da anastomose. Utilizou-se o teste T para amostras nÃo pareadas para dados paramÃtricos e Mann-Whitney test para dados nÃo paramÃtricos. Ocorreu um (4,5%) Ãbito em cada grupo sendo o do grupo I (controle) no 7 dia pÃs-operatÃrio devido à deiscÃncia da anastomose colo-cÃlica e outro no 10 dia de pÃs-operatÃrio no grupo II(estudo) devido à infecÃÃo de sÃtio cirÃrgico incisional profunda com deiscÃncia total da parede abdominal. NÃo foi observado diferenÃa estatisticamente significante no grau de aderÃncias intestinais entre os grupos. Durante a realizaÃÃo do teste de pressÃo de ruptura ocorreu ruptura da anastomose de um animal em cada grupo e nÃo houve diferenÃa estatisticamente significante entre os grupos (p>0,05). A anastomose colo-cÃlica sem preparo intestinal apresentou a mesma seguranÃa e eficÃcia da anastomose realizada com preparo prÃvio. / The objective of this study was to evaluate the efficacy of colo-colonic anastomosis in dogs with and without preoperative bowel preparation. The experiment included 42 healthy female mongrel dogs (Canis familiaris) weighing 8.4-16.9 Kg, supplied by the municipal dog pound of Teresina, PiauÃ. The animals were distributed at random in two groups of 21 animals each: Group I (control) = submitted to bowel preparation with rectal administration of 12% glycerin solution one day before the procedure, and Group II (study) = without previous bowel preparation. All animals were submitted to laparotomy with sectioning of the descending colon and primary anastomosis using polypropylene thread under the peri and postoperative supervision of a veterinary physician. The animals were allowed access ad libitum to water and standard feed following the first evacuation. On the 21st postoperative day (POD 21), the dogs were euthanized with ketamine i.v. followed by 20% potassium chloride i.v., and a second laparotomy was performed through the same incision in order to evaluate the anstomosis. In addition, the abdominal cavity was evaluated for adhesions and the burst pressure of the anastomosis was tested. The unpaired samples were compared with Studentʼs t test for parametric data and with the Mann-Whitney test for non-parametric data. One animal in each group (4.5%) died. The death in Group I (control) occurred on POD 7 due to anastomotic dehiscence. The death in Group II (study) occurred on POD 10 due to deep incisional infection at the surgical site and complete dehiscence of the abdominal wall. The groups did not differ significantly with regard to adhesion grade or anastomotic burst pressure (one specimen burst in each group) (p>0.05). In conclusion, the level of safety and efficacy was the same for colo-colonic anastomosis with and without previous bowel preparation. / The objective of this study was to evaluate the efficacy of colo-colonic anastomosis in dogs with and without preoperative bowel preparation. The experiment included 42 healthy female mongrel dogs (Canis familiaris) weighing 8.4-16.9 Kg, supplied by the municipal dog pound of Teresina, PiauÃ. The animals were distributed at random in two groups of 21 animals each: Group I (control) = submitted to bowel preparation with rectal administration of 12% glycerin solution one day before the procedure, and Group II (study) = without previous bowel preparation. All animals were submitted to laparotomy with sectioning of the descending colon and primary anastomosis using polypropylene thread under the peri and postoperative supervision of a veterinary physician. The animals were allowed access ad libitum to water and standard feed following the first evacuation. On the 21st postoperative day (POD 21), the dogs were euthanized with ketamine i.v. followed by 20% potassium chloride i.v., and a second laparotomy was performed through the same incision in order to evaluate the anstomosis. In addition, the abdominal cavity was evaluated for adhesions and the burst pressure of the anastomosis was tested. The unpaired samples were compared with Studentʼs t test for parametric data and with the Mann-Whitney test for non-parametric data. One animal in each group (4.5%) died. The death in Group I (control) occurred on POD 7 due to anastomotic dehiscence. The death in Group II (study) occurred on POD 10 due to deep incisional infection at the surgical site and complete dehiscence of the abdominal wall. The groups did not differ significantly with regard to adhesion grade or anastomotic burst pressure (one specimen burst in each group) (p>0.05). In conclusion, the level of safety and efficacy was the same for colo-colonic anastomosis with and without previous bowel preparation.

Many cities seek utilities monitoring with centrally managed Internet of Things (IoT) systems. This requires the development of numerous reliable low-cost wireless sensors, such as water temperature and flow meters, that can transmit information from subterranean pipes to surface-mounted receivers. Traditional radio communication systems are either unable to penetrate through multiple feet of earthen and manmade material, or have impractically large energy requirements which necessitate either frequent replacement of batteries, or a complex (and expensive) built-in energy harvesting system. Magnetic signaling systems do not suffer from this drawback: low-frequency electromagnetic waves have been shown to penetrate well through several feet of earth and water. In the past, these signals were too weak for practical use; however, this has changed with the recent proliferation of high-sensitivity magnetometers and compact rare-earth magnets. A permanent magnet can be either rotated or vibrated to create an oscillating magnetic field. Utilizing this phenomenon, two types of magnetic transmitter are investigated in this study: one which uses a propeller to directly rotate a diametrically magnetized neodymium magnet; and a second in which a permanent magnet is oscillated back-and-forth across a novel soft-magnet Y-stator, which projects a switching magnetic field. In principle, these oscillating magnetic fields can be used for communication from subterranean infrastructure sensors—such as flow meters and leak detection devices—to an aboveground long range (LoRa) radio-networked Arduino receiver equipped with a magnetometer. Simulation software models the oscillating electromagnetic fields produced by the Y-stator configuration. Laboratory performance and field tests establish the capability of two IoT-linked leak-detection sensors that use magnetic telemetry. Remote datalogging demonstrates the viability of integrating many sensors and surface receivers into a single LoRa wireless IoT network.

This dissertation applies a commercial flow simulation software package together with common signal processing techniques to the task of accurately detecting leakage in a large commercial gas pipeline. The techniques developed significantly improved the ability to produce accurate, reliable and stable leak detection predictions for the gas transmission pipeline studied and can be applied generally to other pipelines as well. Recommendations for minimum pipeline requirements to implement successful leak detection are also detailed. There are several commercial software packages available that perform some form of leak detection via system modelling. However, due to the commercial aspects of these products, vendors do not publish the detailed methods of leak detection. This thesis identifies the fundamental techniques required to have accurate and reliable leak detection on a gas transmission pipeline, whilst taking into account the lack of measurement data typically encountered on most gas pipelines. The investigation confirmed that a mass balance technique could be successfully used to produce stable leak detection results for compressible flow in gas transmission pipelines. This leak detection [using mass balance] can be achieved without flow measurement along the pipeline, instead, using only pressure and temperature measurements. Although it is recognized that flow measurement data will greatly improve the ability to detect leaks, the focus of this work is on pipelines where this flow measurement data at intermediate points along the pipeline is not available. It was also demonstrated the reliability of the leak detection was improved by the application of on-line signal processing techniques at various stages of the data processing. / It was clear early into the investigation that the majority of the errors within the leak detection model were created by random errors from the input field data. These non-systematic errors from the measurement data that included pressure and temperature, produced interference with model output. This interference resembled random “white” noise that was removed by a combination of well established data filtering techniques. The most appropriate process of calculating leak detection flow was determined after analysing the results of different techniques applied to large quantities of actual pipeline operating data. The validation of the on-line techniques developed provides a valuable resource for those wishing to implement similar leak detection schemes elsewhere. Furthermore a software environment was chosen which incorporated an open input and output platform for data that could be interfaced with any operating system. Therefore these techniques can be applied to the numerous Supervisory Control and Data Acquisition (SCADA) systems in operation throughout the gas transmission industry, to provide a low cost solution to leak monitoring.

Filter holders and continuous air monitors (CAMs) are used extensively in the nuclear industry. It is important to minimize leakage in these devices and in recognition of this consideration, a limit on leakage for sampling systems is specified in ANSI/HPS N13.1-1999; however the protocol given in the standard is really germane to measurement of significant leakage, e.g., several percent of the sampling flow rate. In the present study, a technique for quantifying leakage was developed and that approach was used to measure the sealing integrity of a CAM and two kinds of filter holders. The methodology involves use of sulfur hexafluoride as a tracer gas with the device being tested operated under dynamic flow conditions. The leak rates in these devices were determined in the pressure range from 2.49 kPa (10 In. H2O) vacuum to 2.49 kPa (10 In. H2O) pressure at a typical flow rate of 56.6 L/min (2 cfm). For the two filter holders, the leak rates were less than 0.007% of the nominal flow rate. The leak rate in the CAM was less than 0.2% of the nominal flow rate. These values are well within the limit prescribed in the ANSI standard, which is 5% of the nominal flow rate. Therefore the limit listed in the ANSI standard should be reconsidered as lower values can be achieved, and the methodology presented herein can be used to quantify lower leakage values in sample collectors and analyzers. A theoretical analysis was also done to determine the nature of flow through the leaks and the amount of flow contribution by the different possible mechanisms of flow through leaks.

With the developing of the software and network environment, software becomes more and more complex. The network attacks which exploit the software vulnerability make the traditional software testing face a crucible challenge. According to the report by the CSI/FBI, the lose cause from Denial-of-Service remains in top 5 highest rank of network attacks in the past 3 years. Besides the network bandwidth consuming, the commonest attack is to exploit the software vulnerabilities. In my research, I found the traditional testing technique could not find the software vulnerabilities efficiently for they just verify the correctness of software. This way of thinking would bypass many software vulnerabilities which do not belong to the logical error such as memory leak. In another way, some test techniques to solve the resource usage vulnerability were proposed in recent years but the results of them are very primitive. Thus, I try to give the software testing a new definition from the resource usage analysis. I propose 3 test criteria in this paper. Testers could combine these test criteria with existing tools as a guide to test the resource usage of the program. With these test criteria, testers can find out the unhealthy usage of software resource.

In the Ottawa Hospital Weight Management Clinic, we have previously identified subpopulations of patients in the upper and lower quintiles for rate of weight loss, and characterized them as ‘obese diet sensitive’ (ODS) and ‘obese diet resistant’ (ODR) patient groups, respectively. Skeletal muscle is a major contributor to basal metabolic rate and mitochondrial proton leak in skeletal muscle can account for up to 50 % of resting oxygen consumption. The overall aim of this research is to explore differences in mitochondrial function in human primary myotubes from ODS and ODR subjects. Subsets of ODS and ODR subjects (n = 9/group) who followed a hypocaloric clinical weight loss program at the Ottawa Weight Management Clinic consented to a muscle (vastus lateralis) biopsy. Human primary myoblasts obtained from biopsies were immunopurified and differentiated into myotubes. Mitochondrial function and distribution were compared in intact myotubes from ODS and ODR subjects. Mitochondrial proton leak was significantly lower (p< 0.05) in ODR myotubes compared to ODS myotubes, independent of whether cells were differentiated in low or high glucose medium. In addition, in low glucose medium, ODR myotubes had higher MnSOD protein levels compared to ODS myotubes (p< 0.05). However, there were no significant differences in mitochondrial content, mitochondrial membrane potential, cellular ROS levels or ATP content between ODS and ODR myotubes. Overall, our in vitro mitochondrial proton leak results are consistent with our previous ex vivo results. Future research should examine the possibility that differences in proton leak between ODS and ODR groups may be related to mechanisms of cellular ROS regulation.

In the Ottawa Hospital Weight Management Clinic, we have previously identified subpopulations of patients in the upper and lower quintiles for rate of weight loss, and characterized them as ‘obese diet sensitive’ (ODS) and ‘obese diet resistant’ (ODR) patient groups, respectively. Skeletal muscle is a major contributor to basal metabolic rate and mitochondrial proton leak in skeletal muscle can account for up to 50 % of resting oxygen consumption. The overall aim of this research is to explore differences in mitochondrial function in human primary myotubes from ODS and ODR subjects. Subsets of ODS and ODR subjects (n = 9/group) who followed a hypocaloric clinical weight loss program at the Ottawa Weight Management Clinic consented to a muscle (vastus lateralis) biopsy. Human primary myoblasts obtained from biopsies were immunopurified and differentiated into myotubes. Mitochondrial function and distribution were compared in intact myotubes from ODS and ODR subjects. Mitochondrial proton leak was significantly lower (p< 0.05) in ODR myotubes compared to ODS myotubes, independent of whether cells were differentiated in low or high glucose medium. In addition, in low glucose medium, ODR myotubes had higher MnSOD protein levels compared to ODS myotubes (p< 0.05). However, there were no significant differences in mitochondrial content, mitochondrial membrane potential, cellular ROS levels or ATP content between ODS and ODR myotubes. Overall, our in vitro mitochondrial proton leak results are consistent with our previous ex vivo results. Future research should examine the possibility that differences in proton leak between ODS and ODR groups may be related to mechanisms of cellular ROS regulation.