The Thesis solves design of light unmanned reconnaissance aircraft carrying 3 kg payload. Based on statistical research chooses the field of long endurance flights, trying to manage problem via solar powered batteries. Difficulities and advantages of this issue are researched and optimal aircraft setup is discussed.

Master’s thesis deals with problematic of operating aspects and competitiveness of VLJ aircraft in Czech and Europe market. The Thesis contain information about different types of VLJ, their operational costs and comparisons with competitors, some information about aircraft fractional ownership and their operation. There is written a market analysis for this aircraft and air taxi service in analyzed.

Diploma thesis deals with a project of a new building of a new science library building. The building has four floors and basement. The building will be located in České Budějovice town. The building fulfills the function of the study of books and technical standards. There is designed spaces for organizing lectures and refreshments in cafeteria in the first floor of the building. Library space made available barrier free. Its architectural design resembles the shape of an open book. The structural system meets modern trends in construction and architecture, and it does not interfere with the surrounding buildings.

The diploma thesis presents design of construction with FRP reinforcement. Including design process of cross-section with FRP reinforcement exposed to bending moment and shear force at ultimate limite state according to given standards and guidelines. Long term physical and mechanical properties of FRPs are taking into account. There are also compared load capacities of cross-section exposed to combination of bending moment and axial force, which were designed according to mentioned standards. In another part of diploma thesis there is a design of construction (precast gatehouse) with FRP reinforcement and steel reinforcement with ordinary and lightweight concerete.

The subject of this diploma thesis is the design of multifunctional building in Brno, in Cimburkova street. The building is placed on flat terrain and it has four floors. Floor plan of multifunctional building is rectangle shaped. There are three different establishments in this building. Most of space of ground floor and first floor is used as parking. Rest of space of ground floor and second floor is used as café, hairdresser and store. There are eight separate offices and sanitary facilities, break rooms, storages and servers. The supporting construction of building is made of reinforced concrete column system and ceiling slabs. The building is based on reinforced concrete slab and than there is a flat roof above the building.

The dissertation thesis is focused on a design of new methodology that can be used for selection of optimal variant for the revitalization of light building facade system known as OD-001 “Boletice panel” when current construction solutions and materials are implemented. Thermographic measurement and engineering survey of selected buildings was carried out to determine the defects and insufficiencies that might accompanied these structures and their revitalization. Another point of my thesis was a possibility of revitalization by bonded facade. Mechanical resistance of bonded facade was verified throughout experimental testing and by mathematical calculation. The usability was confirmed on the basis of specific criteria that were stipulated in advance. The selected criteria are focused on areas which are important for investors. These are mainly financial cost, payback period but also the impact on the environment. Simulations and advanced methods of decision making were used.

The diploma thesis deals with design and elaboration of the project documentation of the sports center. The proposed sport center facility is located in the western part of Zruč nad Sázavou, in a location designed for buildings and areas of sport and relaxation use. The object of the sports center is designed as two-storey, non-blocked, roofed flat roof. The main feature of the sports center is the multipurpose sports hall with a single-shell curved flat roof. The supporting element is a curved glued lamellar truss. The proposed contruction of the sports center has 2 functional parts. This is a multipurpose sports hall with backgrounds (dressing rooms, washrooms), two squash courts, a gym and two exercise halls as well as facilities. The sports hal lis complemented by tribune for 380 spectators. The second part is a sports bar with a capacity of 40 people. The perimeter structures of the sports center are designed by a ceramic and insulated mineral wool contact systém with a ventilated aluminum facade. The supporting ceiling structure consists of prefabricated Spiroll panels. Designed 2 VZT engine rooms in 2nd floor, on efor 1st floor and second for 2nd floor including sports hall. Hot water heating by gas boilers. Part of the proposed construction is paved areas of parking lots

The theme of the diploma thesis is the solution of the pre-plant zone of the Dukovany nuclear power station. Creating a vision of how this space could develop further in the next 50 years and how it could work in a transitional phase during the construction of a new nuclear power plant unit. The subject of the thesis is the elaboration of an architectural study, which is based on an urban study. Urban study was processed within the framework of the pre-diploma thesis and solved mainly the overall problems of this area, the new transport connection, and the functional division of the whole area. The area was divided into three functional units, namely the transport zone, the administrative zone and the sports and education zone. At present, there are a lot of small structurally and functionally unsuitable buildings in this area. The diploma thesis deals with the design of new buildings with a clear functional use in the administrative zone, in the area in front of the main gatehouse. A new representative square was created, and three buildings are designed around it. The dominant feature of the whole area was a high-rise office building near the gatehouse. In front of the office building, towards the main road, the service building I was designed, which contains business and healthcare services. On the other side of the square was located the service building II, where there are technical services, such as workshops, warehouses and metrology. The last building solved within the diploma thesis is the building of sports and locker rooms of suppliers, which is designed behind the square near the greenery. New building copies mass of the only preserved building in this area, namely the building of the information centre. The designed building has a fitness centre and locker rooms of external workers of the power plant.

The topic of the Diploma thesis is a design of the New train station in Brno. The plot is located on the boundary of three city districts – Komárov, Štýřice and Trnitá. This area includes the railway structure for the new train station and also its public spaces, which are very close to the river Svratka. The railway structure is designed as bridge construction, that rises all platforms and rail tracks to 7,65 metres above the ground level. So all of the railways do not become a barrier in the city. The main concept extends a longitudinal axis of the city boulevard through the train station, which creates a high-rise building in the southern part of the plot. This axis is written not only to the layout but also to the roof design. The train station includes two underground levels, ground floor and first floor. Underground levels consist of P+R parking, deliveries only area, technical facilities and subway terminal. The ground floor is the main traffic centre. There is an entrance hall, shopping area, bus terminal and public corridors. The first floor includes platforms for train departures and arrivals. There are also public spaces in the entrance hall. The basic structural system consists of two parts. The first part is a massive reinforced concrete structure of the railway bridge deck and all underground levels. This structure is based on reinforced concrete foundation pads with drilled piles. The second part is a steel frame structure of the roof. That includes steel columns and truss girders for the structure of the lower area. The higher part of the roof is designed as a steel-truss bridge with the characteristic profile. The new train station supposes to create a new gate to the city of Brno, that connects contemporary districts with the historical city center.

The master´s thesis deals with a project documentation of a office building with fitness center in Brno-Bystrc. The object is designed as a detached building with four floors and with one basement. Floor plan of the building is regular, staffed by sloping terrain. In basement is situated underground garage and technical rooms of building. In the first floor is fitness center and garage for a customers. In other floors are office spaces for private company. Above the roof is a engine rooms of ventilation. The structural system is reinforced concrete skeleton, facade is designed as a curtain walling. The object is covered with a flat roof.