This diploma thesis deals with design and assessment of selected parts of the reinforced concrete frame of multi-storey administrative building according to the ultimate and serviceability limit state. The aim of this thesis was to design and assess the reinforced concrete structure of a slab above the first floor, one column, a foundation pad and a staircase. In addition to the static calculation, drawing documentation is included. Internal forces were obtained from the 3D model created in computational software Scia Engineer 16.1.

This diploma thesis deals with design of steel structure with composite steel-concrete floor structure of a office building.The building is located in Moravský Krumlov. The Office buidling consist of multi-storey building and an entrance atrium. The total ground plan's dimensions are 52,8m x 48,0m. The multi-storey building has 8 floor. The maximum heigh of the building is 25,32m above ground. The project is designed in two options. For winning variant is including check and it is performed a drawings with design and check assembly details and anchorage.

The aim of this thesis is the design and analysis of pedestrian bridge across the lagoon. Three variants were designed. The variant of structure, which combines stress ribbon with steel arches, was chosen for analysis. There is a chapter in this thesis which deals with an ideal shape of arches for different types of loads. The calculation of load effects was made in software Ansys 17.0, considering scnstruction stages. Ultimate limit state and state limit state are evaluated. For evaluation of concrete cross sections was used MS Excel. Steel cross sections were evaluated in software Ansys 17.0. d Dynamic behaviour of construction was assessed. The mode shapes and natural frequencies were calculated. The harmonic excitation response was studied. The loss of stability was checked. The design and assessment are according to the european standards.

The diploma thesis deals with the structural assessment of the existing reinforced concrete frame structure of the production building. The structure under consideration is carried out as a reinforced concrete monolithic frame structure with a discrepancy of 6,15 x 6,15 m (axis). The object has a rectangular plan of 13 x 9 fields. The total dimension is 56 x 81m and is divided into three dilation units on all floors by two inserted 3,65 m wide fields. The building has three above-ground floors and one underground floor. The construction height of the basement is 3,675 m, above ground level 4,0 m. On the west side of the building (axis A) are three reinforced concrete elevator shafts with a dimension of approximately 4,5 x 3,8 m. The envelope and inner partitions are made of bricks full of burned. The work shall include a static assessment of the status quo, a determination of the load capacity and a proposal for appropriate adjustments to ensure static reliability.

The diploma thesis concerns static project of chosen parts of load-bearing structure four-storey multifunctional building. It´s frame structural systém locally supported colomns. The thesis suggests floor slab above ground floor including punching, colomn, foundation pad, basement wall, loaded soil and strip foundation. Every element was judged by load-bearing capacity, designed reinforcement and made drawings of reinforcement. Calculation of internal forces is made by finite element method of the program dlubal RFEM.

This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.

The aim of the diploma thesis was to design reinforced concrete construction of the indoor swimming pool and ensure impermeability of the construction, to ensure behavior as concrete tank construction. Static analysis was done by using program Dlubal RFEM 5.12, where interaction of subsoil with construction was taken into account. Slabs around the swimming pool area were divided into expansion section because of temperature changes from glass façade an after that the sealing of expansion gap was solved. Construction system under the swimming was designed and was tested the behavior of walls and slabs. Analysis was done also to considerate of hydration heat. The drawing was done by software CADKON RCD.

The main focus of this master thesis is the design and assessments of the bridge structure consist of a stress ribbon supported by a steel arch. Three preliminary studies of pedestrian bridges above the valley were created and the one with semi-through deck supported by arch through cables was chosen to detail processing. This thesis includes a chapter, which deals with finding the ideal shape of arch. The computational beam model for the analysis of the structure was created in software Ansys Mechanical including the construction stages. The correctness of the computational model was verified by the secondary model created in the software Midas Civil. For evaluation of the structure in crosswise direction was created slab model in software Midas Civil. The structure was evaluated considering the ultimate serviceability state and ultimate limit state according to currently valid standards. The thesis also includes dynamic analysis.

The Diploma thesis deals with the reconstruction design of a footbridge in the city of Kroměříž, Czech Republic. The footbridge would serve as safe transport for pedestrians over the Morava river. The main objective of the thesis is to conceive two or three reconstruction designs. The most suitable one will be opted for and elaborated in more detail. Eventually, strengthening of the bridge by means of additional prestressing using mono-strand post-tensioning systems is picked as the best solution of the planned reconstruction. The monostrand post-tensioning system is led under the deck, the cross section being outside. External cables are anchored in concrete blocks built around existing supports. Load-generated internal forces are calculated on a spatial bar model with non-linear first-order analysis. The calculation is executed using the finite element method in the midas Civil programme. The chosen reconstruction design is then assessed against load capacity limit states, and functionality. Also, the designed reconstruction is assed for dynamic effects. Results are compared with existing structure, and verified against the real-time tensometric measurement-obtained data. Dimensions, assessment of load-bearing structure, and structural details are all made according to valid Eurocodes.

This diploma thesis is focused on the roofing of the stage in spa park in Poděbrady. This construction is designed in two variants. In each variant is determined load on the structure and internal forces acting on the structure. Of these two variants, only one variant was selected. This selected variant was design in detail. In this variant was dimension their parts. Under the roof construction is located stage, which was not solved in the diploma thesis. All elements are dimensioned to the ultimate load condition by ČSN EN 1992-1-1. Drawings of the foundations, shapes construction, reinforcement and visualization are processed in the drawing part.